EN 2591-423:2005

Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength

This standard specifies a method to verify the ability of the accessory thread of the connector to withstand stresses.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren - Teil 423: Steckverbinder, Festigkeit des rückwärtigen Gewindes

Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit des Gewindes der Zubehörteile des Steckverbinders gegen Beanspruchungen fest.
Sie ist in Verbindung mit EN 2591 100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 423 : Résistance des filetages arrières des connecteurs

Aeronavtika – Elementi električnih in optičnih povezav – Preskusne metode – 423. del: Trdnost zadnjega navoja pri konektorju

General Information

• Status: Published
• Publication Date: 25-Oct-2005
• Withdrawal Date: 29-Apr-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Oct-2005
• Completion Date: 26-Oct-2005
• Ref Project: SIST EN 2591-423:2006 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2591-423:2006
01-julij-2006
$HURQDYWLND±(OHPHQWLHOHNWULþQLKLQRSWLþQLKSRYH]DY±3UHVNXVQHPHWRGH±
GHO7UGQRVW]DGQMHJDQDYRMDSULNRQHNWRUMX
Aerospace series - Elements of electrical and optical connection - Test methods - Part
423: Connector rear accessories thread strength
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren -
Teil 423: Steckverbinder, Festigkeit des rückwärtigen Gewindes
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 423 : Résistance des filetages arrieres des connecteurs
Ta slovenski standard je istoveten z: EN 2591-423:2005
ICS:
49.060
SIST EN 2591-423:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 2591-423
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 49.060

English Version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 423: Connector rear accessories thread
strength
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 423 : Résistance des Verbindungselemente - Prüverfahren - Teil 423:
filetages arrières des connecteurs Steckverbinder, Festigkeit des rückwärtigen Gewindes
This European Standard was approved by CEN on 19 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-423:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 2591-423:2005 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Preparation of specimens.4
4 Apparatus.
...