Road marking materials - Sampling from storage and testing

This document specifies methods to obtain representative samples of road marking materials for testing and gives the appropriate test methods. The methods to obtain representative samples are described as appropriate for the main product types, i.e. paint, cold plastics, thermoplastics, premix glass beads, drop-on materials, preformed road markings and retroreflecting road studs.
NOTE   This document may apply to the verification and/or identification of consignments of road marking materials or materials held in stock, for example in a warehouse or at the manufacturer's storage facility, or for materials which require checking prior to application.

Straßenmarkierungsmaterialien - Probenahme an rückgestellter Produktion und Prüfung

Die vorliegende Europäische Norm legt Verfahren zur Gewinnung repräsentativer Proben von Straßen¬markierungsmaterialien fest und beschreibt die entsprechenden Prüfverfahren. Die Verfahren, mit denen repräsentative Proben gewonnen werden können, sind wie jeweils anwendbar für die wesentlichen Produkttypen beschrieben, d. h. Markierungsfarben, Kaltplastikmassen, Heißplastikmassen, Premix¬glasperlen, Nachstreumittel, vorgefertigte Straßenmarkierungen und retroreflektierende Markierungsknöpfe.
ANMERKUNG   Die vorliegende Europäische Norm kann bei der Durchführung von Kontrollprüfungen und/oder bei der Identitätsprüfung von Straßenmarkierungsmaterialien angewendet werden, die in einem Vorratslager, beispielsweise bei einem Hersteller oder einem Händler gelagert werden, oder bei Materialien, die an einen Kunden ausgeliefert wurden und vor der Applikation eine Prüfung erfordern.

Produits de marquage routier - Echantillonnage sur stock et essais

La présente Norme européenne définit les méthodes d’obtention d’échantillons représentatifs des produits de marquage routier pour essai et fournit les méthodes d’essai appropriées. Les méthodes d’obtention d’échantillons représentatifs sont décrites selon les principaux types de produits, c’est-à-dire les peintures, les enduits à froid, les enduits à chaud, les microbilles de verre de prémélange, les produits de saupoudrage, les produits de marquage routier préfabriqués et les plots de sécurité rétroréfléchissants.
NOTE   La présente Norme européenne peut s’appliquer à la vérification et/ou à l’identification des produits de marquage routier stockés, par exemple dans un entrepôt ou une installation de stockage du fabricant, ou pour les produits nécessitant une vérification avant leur application.

Materiali za označevanje vozišča - Vzorčenje iz skladišča in preskušanje

General Information

Status
Not Published
Publication Date
14-Mar-2010
Current Stage
5098 - Decision to abandon - Formal Approval
Start Date
09-Apr-2010
Completion Date
09-Apr-2010

Relations

Buy Standard

Draft
prEN 13459:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13459:2009
01-februar-2009
0DWHULDOL]DR]QDþHYDQMHYR]LãþD9]RUþHQMHL]VNODGLãþDLQSUHVNXãDQMH
Road marking materials - Sampling from storage and testing
Straßenmarkierungsmaterialien - Probenahme an rückgestellter Produktion und Prüfung
Produits de marquage routier - Echantillonnage sur stock et essais
Ta slovenski standard je istoveten z: prEN 13459
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13459:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13459:2009

---------------------- Page: 2 ----------------------
oSIST prEN 13459:2009
EUROPEAN STANDARD
DRAFT
prEN 13459
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 93.080.20 Will supersede ENV 13459-1:1999
English Version
Road marking materials - Sampling from storage and testing
Produits de marquage routier - Echantillonnage sur stock et Straßenmarkierungsmaterialien - Probenahme an
essais rückgestellter Produktion und Prüfung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13459:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13459:2009
prEN 13459:2008 (E)
Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Definitions .4
4 Sampling procedures .4
5 Testing of samples .7
6 Test report .9
Annex A (normative) Minimum information required to accompany the sample .10

2

---------------------- Page: 4 ----------------------
oSIST prEN 13459:2009
prEN 13459:2008 (E)
Foreword
This document (prEN 13459:2008) has been prepared by Technical Committee CEN/TC 226 “Road equipment”,
the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede ENV 13459-1:2001.


3

---------------------- Page: 5 ----------------------
oSIST prEN 13459:2009
prEN 13459:2008 (E)
1 Scope
This European Standard specifies methods to obtain representative samples of road marking materials for testing
and gives the appropriate test methods. The methods to obtain representative samples are described as
appropriate for the main product types, i.e. paint, cold plastics, thermoplastics, premix glass beads, d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.