Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

This European Standard specifies minimum requirements for self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only.
Such equipment is intended for use in work situations where the risk on overpressurisation of the pressure vessels with their valves due to hot environmental conditions is low.
This European Standard does not apply to apparatus for work and rescue or to diving apparatus.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

Atemschutzgeräte - Behältergeräte mit Druckluft (Pressluftatmer) mit Halbmaske in der Ausführung mit einem Überdrucklungenautomaten nur für Fluchtzwecke

Diese Europäische Norm legt Mindestanforderungen für Behältergeräte mit Druckluft (Pressluftatmer) mit
Halbmaske in der Ausführung mit einem Überdrucklungenautomaten nur für Fluchtzwecke fest.
Solche Ausrüstung ist zum Einsatz bei Arbeitssituationen vorgesehen, bei denen die Gefahr der
Druckerhöhung in den Druckbehältern mit ihren Ventilen durch heiße Umgebungsbedingungen gering ist.
Diese Europäsche Norm gilt nicht für Geräte für Arbeit und Rettung und nicht für Tauchgeräte.
Laborprüfungen und praktische Leistungsprüfungen sind zum Beurteilen der Übereinstimmung mit den
Anforderungen enthalten.

Appareils de protection respiratoire - Appareils de protection respiratoire autonomes à circuit ouvert, à air comprimé avec demi-masque et soupape à la demande à commande à la première inspiration, à pression positive, pour l'évacuation uniquement

La présente Norme européenne spécifie les exigences minimales applicables aux appareils de protection
respiratoire isolants autonomes à circuit ouvert à air comprimé, pourvus d�un demi-masque avec une soupape
à la demande à pression positive, à commande pulmonaire, conçus pour l�évacuation uniquement.
Ces appareils sont destinés à être utilisés dans les situations de travail ne comportant qu�un risque faible de
mise en surpression des conteneurs d�air comprimé à soupape par suite de conditions environnementales à
température élevée.
La présente Norme européenne ne s�applique ni aux appareils de protection pour le travail et le sauvetage, ni
aux appareils de plongée.
Il contient des essais pratiques en laboratoire et des essais de performance permettant d�évaluer la
conformité aux spécifications.

Oprema za varovanje dihal – Samoreševalni dihalni aparat na stisnjeni zrak z odprtim krogotokom in polobrazno masko, načrtovan tako, da vključuje krmiljenje ventila z nadtlakom iz pljuč; samo za namen evakuacije

General Information

Status
Withdrawn
Publication Date
18-Oct-2005
Withdrawal Date
23-Mar-2022
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2022
Completion Date
02-Dec-2022

Buy Standard

Standard
EN 14529:2006
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes onlyAppareils de protection respiratoire - Appareils de protection respiratoire autonomes a circuit ouvert, a air comprimé avec demi-masque et soupape a la demande a commande a la premiere inspiration, a pression positive, pour l'évacuation uniquementAtemschutzgeräte - Behältergeräte mit Druckluft (Pressluftatmer) mit Halbmaske in der Ausführung mit einem Überdrucklungenautomaten nur für Fluchtzwecke13.340.30Varovalne dihalne napraveRespiratory protective devicesICS:SIST EN 14529:2006enTa slovenski standard je istoveten z:EN 14529:200501-januar-2006SIST EN 14529:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14529August 2005ICS 13.340.30 English VersionRespiratory protective devices - Self-contained open-circuitcompressed air breathing apparatus with half mask designed toinclude a positive pressure lung governed demand valve forescape purposes onlyAppareils de protection respiratoire - Appareils deprotection respiratoire autonomes à circuit ouvert, à aircomprimé avec demi-masque et soupape à la demande àcommande à la première inspiration, à pression positive,pour l'évacuation uniquementAtemschutzgeräte - Behältergeräte mit Druckluft(Pressluftatmer) mit Halbmaske in der Ausführung miteinem Überdrucklungenautomaten nur für FluchtzweckeThis European Standard was approved by CEN on 1 July 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14529:2005: E

Methods of measurement of the insulation resistance of the carrying container.21 Annex B (informative)
Marking.24 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.25 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC (PED).26

EN 132:1998, Respiratory protective devices – Definitions of terms and pictograms EN 134:1998, Respiratory protective devices - Nomenclature of components EN 140:1998, Respiratory protective devices – Half mask and quarter masks – Requirements, testing, marking EN 148-1, Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection EN 148-2, Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection EN 148-3, Respiratory protective devices - Threads for facepieces - Part 3: Thread connection for M 45 x 3 EN 1964-1, Transportable gas cylinders — Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres — Part 1: Cylinders made of seamless steel with an Rm value of less than 1100 MPa EN 1964-2, Transportable gas cylinders — Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres — Part 2: Cylinders made of seamless steel with an Rm value of 1100 MPa and above EN 1964-3, Transportable gas cylinders — Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacity from 0,5 litre up to and including 150 litres — Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa EN 1975, Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0, 5 litre up to 150 litre EN 12021, Respiratory protective devices - Compressed air for breathing apparatus EN 12245, Transportable gas cylinders - Fully wrapped composite cylinders EN 13274-2:2001, Respiratory protective devices - Methods of test - Part 2: Practical performance tests EN 13274-3:2001, Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.