EN 12847:2002
(Main)Bitumen and bituminous binders - Determination of settling tendency of bitumen emulsions
Bitumen and bituminous binders - Determination of settling tendency of bitumen emulsions
This European Standard specifies a method for the determination of the settling tendency of bitumen emulsions.
NOTE 1 This test method is not applicable for emulsions having a low viscosity.
NOTE 2 For the purposes of this European Standard, the term "% (m/m)" is used to represent the mass fraction.
WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Absetzverhaltens von Bitumenemulsionen
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Absetzverhaltens von Bitumenemulsionen fest.
Bitumes et liants bitumineux - Détermination de la tendance à la décantation des émulsions de bitume
Domaine d'application
Cette Norme européenne prescrit une méthode pour la détermination de la tendance à la décantation des émulsions de bitume.
NOTE 1 Cette méthode n'est pas applicable pour les émulsions de faible viscosité.
NOTE 2 Pour les besoins de la présente Norme européenne, le terme « % (m/m) » est utilisé pour représenter la fraction massique.
AVERTISSEMENT L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje časa obstojnosti bitumenskih emulzij
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Absetzverhaltens von BitumenemulsionenBitumes et liants bitumineux - Détermination de la tendance a la décantation des émulsions de bitumeBitumen and bituminous binders - Determination of settling tendency of bitumen emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 12847:2002SIST EN 12847:2003en01-januar-2003SIST EN 12847:2003SLOVENSKI
STANDARD
SIST EN 12847:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12847May 2002ICS 75.140; 91.100.50English versionBitumen and bituminous binders - Determination of settlingtendency of bitumen emulsionsBitumes et liants bitumineux - Détermination de la tendanceà la décantation des émulsions de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung desAbsetzverhaltens von BitumenemulsionenThis European Standard was approved by CEN on 15 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12847:2002 ESIST EN 12847:2003
EN 12847:2002 (E)2ForewordThis document EN 12847:2002 has been prepared by Technical Committee CEN/TC 336 "Bituminous binders", thesecretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.This European Standard is part of a package including 14 standards: EN 1428, EN 1429, EN 1430, EN 1431,EN 12846, EN 12847, EN 12848, EN 12849, EN 12850, EN 13074, EN 13075-1, EN 13075-2, EN 13614 andEN 13808.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 12847:2003
EN 12847:2002 (E)31 ScopeThis European Standard specifies a method for the determination of the settling tendency of bitumen emulsions.NOTE 1This test method is not applicable for emulsions having a low viscosity.NOTE 2For the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction.WARNING – The use of this standard can involve hazardous materials, operations and equipment. Thisstandard does not purport to address all of the safety problems associated with its use. It is theresponsibility of the user of this standard to establish appropriate safety and health practices anddetermine the applicability of regulatory limitations prior to use.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).EN 581), Sampling bituminous binders.EN 1428, Bitumen and bituminous binders - Determination of water content in bitumen emulsions – azeoptricdistillation method.EN 12594, Bitumen and bituminous binders - Preparation of test samples.EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696:1987).3 Terms and definitionsFor the purposes of this European Standard, the following term and definition apply.3.1settling tendencydifference in water content of the top layer and the bottom layer of a prescribed volume of sample after standing fora specified time at ambient temperature4 PrincipleThe sample is allowed to stand for the specified time at ambient temperature in a stoppered graduated cylinder,after which the water contents of the top and botto
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.