FprEN ISO 19085-5

Woodworking machines - Safety - Part 5: Dimension saws (ISO/FDIS 19085-5:2024)

This document specifies the safety requirements and measures for dimension saws (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)       device to raise and lower the main saw blade and scoring saw blade;
b)       device to tilt the main saw blade and scoring saw blade for angled cutting in one or both directions;
c)        device for scoring;
d)       device for grooving with milling tool with a width not exceeding 20 mm;
e)       demountable power feed unit;
f)         power-operated sliding table;
g)       workpiece clamping.
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

Holzbearbeitungsmaschinen - Sicherheit - Teil 5: Formatkreissägemaschinen (ISO/FDIS 19085-5:2024)

Dieses Dokument beschreibt die Sicherheitsanforderungen für Formatkreissägemaschinen, wie in 3.1 definiert, die für den dauerhaften Einsatz in der Produktion geeignet sind und im Folgenden als „Maschinen“ bezeichnet werden.
Die Maschinen sind für das Schneiden von Massivholz und Werkstoffen mit ähnlichen physikalischen Eigenschaften wie Holz konstruiert.
Es behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, wie sie in Anhang A aufgelistet sind, die auf die Maschinen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vom Hersteller vorhergesehenen Bedingungen verwendet, eingestellt und gewartet werden; vernünftigerweise vorhersehbaren Fehlanwendungen wurden ebenso in Betracht gezogen. Ferner wurden die Phasen Transport, Montage, Demontage, Rückbau und Verschrottung berücksichtigt.
Es ist auch für Maschinen anwendbar, die mit einer oder mehreren der folgenden Baugruppen/zusätzlichen Arbeitsaggregaten ausgerüstet sind, deren Gefährdungen behandelt wurden:
a) Einrichtung zum Anheben und Absenken des Hauptsägeblattes und des Ritzsägeblattes;
b) Einrichtung zum Schrägstellen des Hauptsägeblattes und des Ritzsägeblattes für Winkelschnitte;
c) Einrichtung zum Ritzsägen;
d) Einrichtung zum Nuten mit einem Fräswerkzeug mit einer Breite von höchstens 20 mm;
e) abnehmbarer Vorschubapparat;
f) Aggregat zum Postforming-Schneiden;
g) kraftbetätigter Schiebetisch;
h) Werkstückspannvorrichtung.
Dieses Dokument gilt nicht für Maschinen, die zur Verwendung in potentiell explosiven Atmosphären vorgesehen sind, oder für Maschinen, die vor seinem Ausgabedatum hergestellt wurden.

Machines à bois - Sécurité - Partie 5: Scies au format (ISO/FDIS 19085-5:2024)

Le présent document spécifie les exigences et les mesures de sécurité pour les scies au format (définies en 3.1), capables d’une utilisation en production continue et ci-après désignées également «machines».
Les machines sont conçues pour la coupe de bois massif et de matériau ayant des caractéristiques physiques similaires à celles du bois.
Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, énumérés à l'Annexe A, applicables aux machines lorsqu'elles sont utilisées, réglées et entretenues comme prévu et dans les conditions prévues par le fabricant; une mauvaise utilisation raisonnablement prévisible a été prise en considération également. Les phases de transport, d'assemblage, de démontage, de mise hors service et de mise au rebut ont également été prises en compte.
Le présent document est également applicable aux machines équipées d'un ou plusieurs des dispositifs/unités de travail supplémentaires suivants, dont les phénomènes dangereux ont été traités:
a)       dispositif pour élever et abaisser la lame de scie principale et la lame de scie d'incision;
b)       dispositif pour incliner la lame de scie principale et la lame de scie d'incision pour une coupe en angle dans un ou les deux sens;
c)        dispositif pour l'incision;
d)       dispositif pour le rainurage à l'aide d'un outil de fraisage ayant une largeur ne dépassant pas 20 mm;
e)       unité d'avance mécanisée démontable;
f)         table mobile mécanisée;
g)       bridage de pièce.
Le présent document n'est pas applicable aux machines prévues pour une utilisation en atmosphères explosibles, ni aux machines fabriquées avant sa date de publication.

Lesnoobdelovalni stroji - Varnost - 5. del: Formatne žage (ISO/FDIS 19085-5:2024)

General Information

• Status: Not Published
• Publication Date: 01-Oct-2024
• ICS: 13.110 - Safety of machinery
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: CEN/TC 142 - Woodworking machines - Safety
• Drafting Committee: CEN/TC 142 - Woodworking machines - Safety
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 23-May-2024
• Completion Date: 23-May-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: kSIST FprEN ISO 19085-5:2024 - Woodworking machines - Safety - Part 5: Dimension saws (ISO/FDIS 19085-5:2024)

Relations

• Revises: EN ISO 19085-5:2017 - Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
• Effective Date: 17-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 19085-5:2021
01-september-2021
Lesnoobdelovalni stroji - Varnost - 5. del: Formatne žage (ISO/DIS 19085-5:2021)
Woodworking machines - Safety - Part 5: Dimension saws (ISO/DIS 19085-5:2021)
Holzbearbeitungsmaschinen - Sicherheit - Teil 5: Formatkreissägemaschinen (ISO/DIS
19085-5:2021)
Machines à bois - Sécurité - Partie 5: Scies au format (ISO/DIS 19085-5:2021)
Ta slovenski standard je istoveten z: prEN ISO 19085-5
ICS:
13.110 Varnost strojev Safety of machinery
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
oSIST prEN ISO 19085-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 19085-5:2021
oSIST prEN ISO 19085-5:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19085-5
ISO/TC 39/SC 4 Secretariat: UNI
Voting begins on: Voting terminates on:
2021-06-29 2021-09-21
Woodworking machines — Safety —
Part 5:
Dimension saws
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19085-5:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

oSIST prEN ISO 19085-5:2021
ISO/DIS 19085-5:2021
ISO/DIS 19085-5:2021(E)
5.5.4 Two-hand control . 11
5.5.5 Electro-sensitive protective equipment (ESPE) . 11
5.5.6 Pressure-sensitive protective equipment (PSPE) . 11
5.5.7 Enabling control . 11
5.6 Prevention of access to hazardous moving parts . 11
5.6.1 Access to the saw blade above the machine table . 11
5.6.2 Access to the saw blade below the machine table . 18
5.6.3 Guarding of drives . 18
5.7 Impact hazard . 18
5.8 Clamping devices . 18
5.9 Measures against ejection . 19
5.9.1 General . 19
5.9.2 Guards materials and characteristics . 19
5.9.3 Anti-kickback devices . 19
5.10 Workpiece supports and guides . 23
5.10.1 Rip fence . 23
5.10.2 Cross-cut fence . 25
5.10.3 Workpiece clamping shoe . 25
5.10.4 Machine table . 26
5.10.5 Extension table . 26
5.10.6 Sliding table . 26
5.11 Safety appliances . 26
6 Safety requirements and measures for protection against other hazards . 29
6.1 Fire . 29
6.2 Noise . 29
6.2.1 Noise reduction at the design stage . 29
6.2.2 Noise emission measurement and declaration. 29
6.3 Emission of chips and dust . 29
6.4 Electricity . 30
6.5 Ergonomics and handling . 30
6.6 Lighting . 30
6.7 Pneumatics . 30
6.8 Hydraulics . 30
6.9 Electromagnetic compatibility . 30
6.10 Laser . 30
6.11 Static electricity . 31
6.12 Errors of fitting . 31
6.13 Isolation . 31
6.14 Maintenance . 31
6.15 Relevant but not significant hazards . 31
7 Information for use . 31
7.1 Warning devices . 31
7.2 Marking . 31
7.2.1 General . 31
7.2.2 Additional markings . 31
© ISO 2021
7.3 Instruction handbook . 32
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
7.3.1 General . 32
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
7.3.2 Additional information . 32
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
Annex A (informative) List of significant hazards . 35
ISO copyright office
CP 401 • Ch. de Blandonnet 8
Annex B (informative) Performance level required . 38
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
iii
Published in Switzerland
ii © ISO 2021 – All rights reserved

oSIST prEN ISO 19085-5:2021
ISO/DIS 19085-5:2021(E)
Contents
Introduction . 8
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and measures for controls . 5
4.1 Safety and reliability of control systems . 5
4.2 Control devices . 5
4.3 Start . 6
4.3.1 Direct start . 6
4.3.2 Start via control power-on . 6
4.4 Safe stops . 7
4.4.1 General . 7
4.4.2 Normal stop . 7
4.4.3 Operational stop . 7
4.4.4 Emergency stop . 7
4.5 Braking function of tools . 7
4.6 Mode selection . 7
4.7 Tool speed changing . 7
4.7.1 Speed changing by shifting the belts on the pulleys . 7
4.7.2 Speed changing by incremental speed change motor . 7
4.7.3 Infinitely variable speed by frequency inverter . 7
4.8 Failure of any power supply . 8
4.9 Manual reset control . 8
4.10 Standstill detection and monitoring . 8
4.11 Machine moving part speed monitoring . 8
4.12 Time delay . 8
4.13 Teleservice . 8
4.14 Power-operated adjustment of the saw blades and fences . 8
4.14.1 Risk of contact between the saw blades and fences . 8
4.14.2 Crushing hazard for the body . 9
4.
...