prEN 17192
(Main)Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
This document defines the test methods and performance characteristics for rigid or semi-rigid non-metallic ductwork which are used for ventilation and air conditioning of buildings.
This document does not include flexible ducts such as those made of textiles, non-metallic spiral ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential buildings are given in EN 16798 3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory conditions. On-site tests are excluded. The test methods and performance characteristics are valid for ventilation ducts with circular, rectangular or other cross sections.
Lüftung von Gebäuden - Nichtmetallische Kanäle - Anforderungen und Prüfmethoden
Dieses Dokument definiert die Prüfverfahren und Leistungsmerkmale für starre oder halbstarre nichtmetallische Luftleitungen, die für die Lüftung und Klimatisierung von Gebäuden verwendet werden.
Dieses Dokument gilt jedoch nicht für flexible Luftleitungen wie solche, die aus Textilien bestehen, nichtmetallische Wickelfalzrohre oder andere, die in EN 13180 behandelt werden, oder Luftleitungen, die aus Isolierungs-Luftleitungsverkleidung hergestellt sind und in EN 13403 behandelt werden. Anforderungen an die Luftdichtheit des Lüftungssystems für Nichtwohngebäude sind in EN 16798 3 enthalten. Für Wohngebäude ist die Anwendung nationaler Vorschriften erforderlich.
Dieses Dokument spezifiziert Methoden zur Prüfung starrer oder halbstarrer nichtmetallischer Luftleitungen unter Laborbedingungen. Vorort-Prüfungen sind ausgeschlossen. Die Prüfverfahren und Leistungsmerkmale gelten für Luftleitungen mit kreisförmigen, rechteckigen und anderen Querschnitten.
Ventilation des bâtiments - Réseau de conduits - Réseau de conduits non métalliques - Exigences et méthodes d'essai
Le présent document définit les méthodes d’essai et les caractéristiques de performance pour les réseaux de conduits non métalliques rigides ou semi-rigides qui sont utilisés pour la ventilation et le conditionnement d’air dans les bâtiments.
Le présent document n’inclut pas les conduits flexibles tel que ceux réalisés en textile, les réseaux de conduits spiralés non métalliques ou autres, qui sont traités dans l’EN 13180, ni les réseaux de conduits réalisés en panneaux isolants de conduits, qui sont traités dans l’EN 13403. Les exigences pour l’étanchéité à l’air du système de ventilation pour les bâtiments non résidentiels sont données dans l’EN 16798-3. Pour les bâtiments résidentiels, il est essentiel d’appliquer les règles nationales.
Le présent document spécifie les méthodes pour soumettre à essai des réseaux de conduits non métalliques rigides ou semi-rigides en conditions de laboratoire. Les essais sur site sont exclus. Les méthodes d’essai et les caractéristiques de performance sont valides pour les conduits de ventilation de section transversale circulaire, rectangulaire ou autre
Prezračevanje stavb - Kanali - Nekovinski kanali - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Prezračevanje stavb - Kanali - Nekovinski kanali - Zahteve in preskusne metode
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test
methods
Lüftung von Gebäuden - Nichtmetallische Kanäle - Anforderungen und Prüfmethoden
Ventilation des bâtiments - Réseau de conduits - Réseau de conduits non métalliques -
Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 17192
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2024
ICS Will supersede EN 17192:2018
English Version
Ventilation for buildings - Ductwork - Non-metallic
ductwork - Requirements and test methods
Ventilation des bâtiments - Réseau de conduits - Lüftung von Gebäuden - Nichtmetallische Kanäle -
Réseau de conduits non métalliques - Exigences et Anforderungen und Prüfmethoden
méthodes d'essai
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 156.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17192:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols . 7
5 Specification . 7
5.1 General. 7
5.2 Air tightness . 8
5.3 Pressure drop . 9
5.4 Service temperature . 9
5.5 Reaction to fire. 9
5.6 Resistance to external pressure . 9
5.7 Microbial resistance . 9
6 General characteristics . 9
6.1 Dimension and tolerances . 9
6.2 Documentation . 9
6.3 Mechanical connection . 9
7 Requirements . 9
7.1 General. 9
7.2 Air tightness . 10
7.3 Pressure drop . 10
7.4 Service temperature . 10
7.5 Reaction to fire. 10
7.6 Resistance to external pressure . 10
7.7 Microbial resistance . 10
8 Test methods . 10
8.1 General. 10
8.2 Air tightness . 10
8.3 Pressure drop . 12
8.4 Service temperature . 16
8.5 Reaction to fire. 16
8.6 Resistance to external pressure . 20
8.7 Microbial resistance . 22
9 Product Information . 22
9.1 Documentation . 22
9.2 Marking and labelling . 23
Bibliography . 24
prEN 17219:2024 (E)
European foreword
This document (prEN 17192:2024) has been prepared by Technical Committee CEN/TC 156 “Ventilation
of buildings”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 17192:2019.
EN 17192:202Y includes the following significant technical changes with respect to EN 17192:2019:
— Reaction to fire tests have been updated with classifications D and E, the tests are in accordance with
the single-flame source test, according standard EN ISO 11925-2
— The thermal resistance test have been taken away because the test was based on flat material and is
difficult to perform on material taken from a duct. The result from Thermal resistance test is relevant
to non metallic ducts and can be added at a later stage if there is a adapted method available.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association,and supports essential requirements of
EU Directive(s) / Regulation(s).
Introduction
This document handles technical requirements and test methods for Non metallic ducts and have been
developed after the Metallic duct, the Flexible duct and the ductwork made from insulation duct board
standards. All features in the other standards have been considered, used, ignored or adapted.
prEN 17219:2024 (E)
1 Scope
This document defines the test methods and performance characteristics for rigid or semi-rigid non-
metallic ductwork which are used for ventilation and air conditioning of buildings.
This document does not include flexible ducts such as those made of textiles, non-metallic spiral
ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which
is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential
buildings are given in EN 16798-3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory
conditions. On-site tests are excluded. The test methods and performance characteristics are valid for
ventilation ducts with circular, rectangular or other cross sections.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1507, Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for
strength and leakage
EN 12237, Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
EN 12792, Ventilation for buildings - Symbols, terminology and graphical symbols
EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using
data from reaction to fire tests
EN 13823, Reaction to fire tests for building products — Building products excluding floorings exposed to
the thermal attack by a single burning item
EN ISO 846, Plastics - Evaluation of the action of microorganisms (ISO 846)
EN ISO 1182, Reaction to fire tests for products - Non-combustibility test (ISO 1182)
EN ISO 1716, Reaction to fire tests for products - Determination of the gross heat of combustion (calorific
value) (ISO 1716)
ISO 22196, Measurement of antibacterial activity on plastics and other non-porous surfaces
EN ISO 11925-2, Reaction to fire tests - Ignitability of products subjected to direct impingement of flame -
Part 2: Single-flame source test (ISO 11925-2)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12792 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
ductwork
system or network of ducts and their components for the transport of air
3.2
rigid duct
duct which cannot be manually longitudinally compressed or decompressed and cannot be flexed in any
direction without permanently damaging the cross sectional area
3.3
semi rigid duct
duct which cannot be manually longitudinally compressed or decompressed but can be flexed in at least
one direction without permanently damaging the cross sectional area
3.4
bending radius
centreline radius after bending a duct
3.5
sealed connection length
length of the perimeter where a duct or component is connected with another duct or component
3.6
internal surface area
internal surface area is the sum of each internal perimeter multiplied by the length of that section of the
ductwork
Note 1 to entry: The length of semi-rigid ductwork is the centreline, the length of rigid ductwork is defined in
accordance with EN 14239.
3.7
maximum Service Temperature
STH
highest temperature at which the ducts and fittings, when installed, continue to function within specified
limits of performance
3.8
minimum Service Temperature
STL
lowest temperature at which the ducts and fittings, when installed, continue to function within specified
limits of performance
3.9
pressure drop
difference between total pressu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.