FprEN 16631
(Main)LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
This document specifies the requirements for the reconditioning and retesting of pressure relief valves (PRVs) for LPG pressure vessels covered under the scope of EN 14129.
This document applies to retesting and reconditioning of PRVs that are carried out in a workshop and does not apply to site adjustment of installed PRVs.
Annex A is a normative annex detailing a sampling approach for PRV requalification which could be used in case of on-site requalification of series produced pressure vessels fitted with series produced PRVs.
Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für Druckbehälter für Flüssiggas (LPG) - Anforderungen an die Instandsetzung
Dieses Dokument legt die Anforderungen an die Instandsetzung und Wiederholungsprüfung von Sicherheitsventilen für Druckbehälter (PRV) für Flüssiggas (LPG) fest, die in den Anwendungsbereich von EN 14129 fallen.
Dieses Dokument gilt für Wiederholungsprüfungen und Instandsetzungen von PRV, welche in einer Werkstatt erfolgen, nicht jedoch für die Einstellung eingebauter PRV am Anwendungsort.
Anhang A ist ein normativer Anhang, der ein Stichprobenverfahren zur wiederkehrenden Prüfung von PRV enthält, das für wiederkehrende Prüfungen von seriengefertigten Druckbehältern mit seriengefertigten PRV am Anwendungsort angewendet werden könnte.
Équipements pour GPL et leurs accessoires - Soupapes de sécurité pour réservoirs de GPL sous pression - Exigences de reconditionnement
No Scope available
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za tlačne posode za UNP - Zahteve za obnovo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16631:2023
01-julij-2023
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za tlačne
posode za UNP - Zahteve za obnovo
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels -
Reconditioning requirements
Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für Druckbehälter für
Flüssiggas (LPG) - Anforderungen an die Instandsetzung
Équipements pour GPL et leurs accessoires - Soupapes de sécurité pour réservoirs de
GPL sous pression - Exigences de reconditionnement
Ta slovenski standard je istoveten z: prEN 16631
ICS:
23.020.32 Tlačne posode Pressure vessels
23.060.40 Tlačni regulatorji Pressure regulators
oSIST prEN 16631:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16631:2023
---------------------- Page: 2 ----------------------
oSIST prEN 16631:2023
DRAFT
EUROPEAN STANDARD
prEN 16631
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS Will supersede EN 16631:2015
English Version
LPG equipment and accessories - Pressure relief valves for
LPG pressure vessels - Reconditioning requirements
Équipements pour GPL et leurs accessoires - Soupapes Flüssiggas-Geräte und Ausrüstungsteile -
de sécurité pour réservoirs de GPL sous pression - Sicherheitsventile für Druckbehälter für Flüssiggas
Exigences de reconditionnement (LPG) - Anforderungen an die Instandsetzung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 286.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16631:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16631:2023
prEN 16631:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 6
5 Materials . 7
5.1 General . 7
5.2 Lubricants, sealants and adhesives . 7
5.3 Shelf life .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.