CEN/TS 15945:2011
(Main)Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging
Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging
This Technical Specification specifies the following for all adult consumers:
- criteria for ease of opening of packages;
- methods for evaluating the ease of opening of consumer packages.
The purpose of this Technical Specification is to specify test methods to evaluate the ease of opening of consumer packages, in order to improve easy access to the contents. For packages regulated for safety or similar reasons, e.g. packaging of dangerous goods and substances, medicinal products, and medical devices, those regulations take precedence.
This Technical Specification applies to all packaging that does not require an opening tool and to packaging that is purchased with an integrated opening tool.
NOTE 1 The method(s) described in this Technical Specification could also be applicable to other types of packages when measuring ease of opening.
NOTE 2 This Technical Specification can be used to test most consumer packages. There are, however certain packaging types that cannot easily be tested with the described methods, such as e.g. very large packaging used to protect refrigerators and washing machines.
Verpackung - Leichtes Öffnen - Kriterien und Prüfverfahren für die Bewertung von Verbraucherpackungen
Diese Technische Spezifikation legt Folgendes für alle erwachsenen Verbraucher fest:
⎯ Kriterien für leichtes Öffnen von Verpackungen;
⎯ Bewertungsverfahren für das leichte Öffnen von Verbraucherpackungen.
Ziel dieser Technischen Spezifikation ist die Festlegung von Prüfverfahren zur Bewertung des leichten Öffnens von Verbraucherpackungen, um die leichte Zugänglichkeit des Inhalts zu verbessern. Bei
Verpackungen, die aus Sicherheitsgründen oder ähnlichen Gründen besonderen Vorschriften unterliegen, wie
z. B. Verpackungen für Gefahrgüter und -stoffe, Arzneimittel und medizinische Geräte, haben diese
Vorschriften immer Vorrang. Diese Technische Spezifikation gilt für alle Verpackungen, die ohne Gebrauch von Werkzeug geöffnet werden
können, und Verpackungen, die mit beigefügtem Werkzeug verkauft werden.
ANMERKUNG 1 Das (die) in dieser Technischen Spezifikation beschriebene(n) Verfahren könnte(n) auch auf andere Arten von Verpackungen anwendbar sein, wenn deren Eigenschaften in Bezug auf leichtes Öffnen festgestellt werden.
ANMERKUNG 2 Diese Technische Spezifikation kann bei der Prüfung der meisten Verbraucherpackungen ange-
wendet werden. Bestimmte Arten von Verpackungen können jedoch nicht problemlos nach den beschriebenen Verfahren geprüft werden, wie z. B. sehr große Verpackungen zum Schutz von Kühlschränken oder Waschmaschinen.
Emballage - Facilité d'ouverture - Critères et méthodes d'essai pour évaluer un emballage destiné aux consommateurs
La présente Spécification technique spécifie les éléments suivants, pour tous les consommateurs adultes : ⎯ des critères pour la facilité d’ouverture des emballages ; ⎯ des méthodes d’évaluation de la facilité d’ouverture des emballages destinés aux consommateurs. Le but de la présente Spécification technique est de spécifier des méthodes d’essai permettant d’évaluer la facilité d’ouverture des emballages destinés aux consommateurs en vue d’améliorer la facilité d’accès au contenu. Pour les emballages réglementés pour des raisons de sécurité ou autres, par exemple les emballages de marchandises et substances dangereuses, de produits médicaux ou de dispositifs médicaux, ces réglementations sont prioritaires. La présente Spécification technique s’applique à tous les emballages ne nécessitant pas d’outil pour les ouvrir et aux emballages qui sont achetés avec un outil d’ouverture intégré. NOTE 1 Les méthodes décrites dans la présente Spécification technique peuvent également s’appliquer à d’autres types d’emballages pour l’évaluation de la facilité d’ouverture. NOTE 2 La présente Spécification technique peut être utilisée pour soumettre à l’essai la plupart des emballages destinés aux consommateurs. Toutefois, certains types d’emballages pourront difficilement être soumis à l’essai avec les méthodes décrites, notamment les emballages de très grande taille servant à protéger par exemple les réfrigérateurs et les machines à laver.
Embalaža - Enostavnost odpiranja - Merila in preskusne metode za vrednotenje embalaže za potrošnike
Ta tehnična specifikacija določa za vse odrasle potrošnike naslednje: – merila za enostavno odpiranje embalaže; – metode za ocenjevanje enostavnosti odpiranja embalaže. Namen te tehnične specifikacije je določiti preskusne metode za ocenjevanje enostavnosti odpiranja embalaže za potrošnike, da se izboljša enostaven dostop do vsebine. Pri embalažah, ki so regulirane zaradi varnostnih ali podobnih razlogov, npr. embalaže za nevarno blago in snovi, zdravila in medicinske primopočke, imajo ti predpisi prednost. Ta tehnična specifikacija velja za vse embalaže, ki ne potrebujejo orodja za odpiranje in za embalaže, ki se kupujejo z vključenim orodjem za odpiranje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2011
Embalaža - Enostavnost odpiranja - Merila in preskusne metode za vrednotenje
embalaže za potrošnike
Packaging - Ease of opening - Criteria and test method for evaluating consumer
packaging
Verpackung - Leichtes Öffnen - Kriterien und Prüfverfahren für die Bewertung von
Verbraucherverpackungen
Emballage - Facilité d'ouverture - Critères et méthode d'essai pour évaluer un emballage
destiné aux consommateurs
Ta slovenski standard je istoveten z: CEN/TS 15945:2011
ICS:
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN/TS 15945
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
March 2011
ICS 55.020
English Version
Packaging - Ease of opening - Criteria and test methods for
evaluating consumer packaging
Emballage - Facilité d'ouverture - Critères et méthodes Verpackung - Leichtes Öffnen - Kriterien und Prüfverfahren
d'essai pour évaluer un emballage destiné aux für die Bewertung von Verbraucherpackungen
consommateurs
This Technical Specification (CEN/TS) was approved by CEN on 17 January 2011 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15945:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Criteria for ease of opening of packaging .6
5 Test methods .7
Annex A (normative) Consumer panel test for ease of opening .9
A.1 Panel test method .9
A.1.1 General .9
A.1.2 Flow chart describing panel test . 11
A.1.3 Test procedure . 11
A.1.4 Evaluation of results . 12
A.2 Results . 13
A.2.1 Test report . 13
A.2.2 Test protocol . 15
Bibliography . 16
Foreword
This document (CEN/TS 15945:2011) has been prepared by Technical Committee CEN/TC 261 “Packaging”,
the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Introduction
Ease of opening is an important factor when designing consumer packaging, as it is important that consumers
of all ages, and of both genders, should be able to access the contents of the package. Consumers may
ultimately avoid the purchase of a particular type of packaging which has proved consistently to be difficult to
open. It is recognised that there is a difference in strength on average between male and female consumers.
Knowing that strength in the hands reduces with age, a panel test method that focuses on elderly consumers,
with less than the average hand strength, can help to gain a new perspective on the ease of opening of
packaging. Packaging that is easy to open for elderly consumers will, in most cases, be easy for the average
consumer to open. It is recognised that there will be consumers with extreme impairment that this specification
cannot represent.
To present valid mechanical test methods for the wide range of packaging present on the market today is not
possible in this specification at this time. A test protocol inspired by the principles described in the ISO 20282
series of standards is therefore used in Annex A. However, it should be noted that mechanical testing and
sensory test by trained panel are useful tools when developing easy to open packaging or for quality control.
We recommend the generation of mechanical data to allow the introduction of new methods, as a means of
demonstrating compliance with this specification.
When appropriate; CEN-CENELEC Guide 6, “Guidelines for standards developers to address the needs of
older persons and persons with disabilities” and the referenced documents were considered when drafting the
specification.
This document specifies procedures for ease of opening. It should commensurate with the maintenance of:
functionality throughout the supply and user chain;
safety and hygiene for both product and user/consumer;
acceptability of the packed product to the user/consumer.
The purpose of the test methods should be to evaluate whether a particular design of packaging can be
considered easy to open by the large majority of consumers, including elderly consumers. The test methods
may be used by, for example:
a designer or manufacturer; to check whether ease of opening requirements have been met;
a potential purchaser or consumers organisation to check whether a particular design of packaging meets
their requirements regarding ease of opening;
a manufacturer, potential purchaser or consumers organisation to compare alternative products.
The results can provide evidence of the ease of opening of a particular design of packaging to potential
purchasers. A test may be carried out by the manufacturer or purchaser directly or by assigning the task to an
appropriate test organisation.
Where the information derived from the test is used for any purpose other than for internal technical or product
development, for example to make a public statement regarding packaging ease of opening in relation to this
specification, testing should be carried out, or should be independently verified, by an accredited test
organisation. The information should be provided in sufficient detail to allow replication of the data-scoring
methods by another organization if the test is repeated.
1 Scope
This Technical Specification specifies the following for all adult consumers:
criteria for ease of opening of packages;
methods for evaluating the ease of opening of consumer packages.
The purpose of this Technical Specification is to specify test methods to evaluate the ease of opening of
consumer packages, in order to improve easy access to the contents. For packages regulated for safety or
similar reasons, e.g. packaging of dangerous goods and substances, medicinal products, and medical
devices, those regulations take precedence.
This Technical Specification applies to all packaging that does not require an opening tool and to packaging
that is purchased with an integrated opening tool.
NOTE 1 The method(s) described in this Technical Specification could also be applicable to other types of packages
when measuring ease of opening.
NOTE 2 This Technical Specification can be used to test most consumer packages. There are, however certain
packaging types that cannot easily be tested with the described methods, such as e.g. very large packaging used to
protect refrigerators and washing machines.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 21067:2007, Packaging — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21067:2007 and the following apply.
3.1
consumer packaging
packaging constituting, with its content, a sales unit for the final user or consumer at the point of retail
[ISO 21067:2007]
3.2
ease of opening
openability of a consumer packaging when used by the intended users to achieve the main goal(s) supported
by the packaging
NOTE Ease of opening is tested as effectiveness of opening, efficiency of opening and satisfaction with opening.
3.3
effectiveness of opening
accuracy and completeness with which users achieve specified goals; percentage of users who achieve the
main goal(s)
3.4
efficiency of opening
resources expended in relation to the accuracy and completeness with which users achieve goal; time taken
to achieve the main goal(s)
3.5
satisfaction of opening
freedom of discomfort, and positive attitudes towards the ease of opening of the packaging
3.6
goal
intended outcome
3.7
panel testing
panel test is user based performance related measurements
NOTE In a panel test, a product is tested by a group of individuals trying out a product in a relative controlled or
experimental setting, where they are given specified task(s) to perform.
3.8
mechanical testing
documented and reproducible mechanical test methods intended to measure the resistance of the relevant
features of a package/packaging system by use of appropriate equipment
3.9
sensory test by trained panel
members of the panel are trained to qualify and quantify sensory properties of the ease of opening of
consumer packaging
4 Criteria for ease of opening of packaging
Ease of opening of packaging is defined as “the openability of a consumer packaging when used by the
intended users to achieve the main goal(s) supported by the packaging”. Such main goals can where
appropriate, include opening and closing, as well as accessing the intended quantity of the product.
The users shall be able to achieve their main goals:
with a high success rate (effectiveness of operation);
within an acceptable task time (efficiency of operation);
with an acceptable level of satisfaction with operation.
Packaging will be considered to be easy to open if the large majority of adult consumers find it to be effective,
efficient and satisfactory as set out above. The test results, from e.g. the panel test in Annex A, can be used to
determine if a packaging meets following requirements:
a) the packaging under study shall be easy to open;
1)
b) it shall be easy to take the intended quantity or portion from the packaging ;
1) It is crucial to the consumer’s satisfaction with the packaging opening system to be able to reach the content of a
packaging in an easy and safe way, however, if unfilled packaging is tested, this question can be omitted. The reason for
omitting the question is recorded in the test protocol.
c) a reclosable packaging shall be easy to close.
Not all questions apply to all packaging since the goals of the packaging will be different for different
packaging designs e.g. reclosable and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.