55.020 - Packaging and distribution of goods in general

This document specifies requirements and provides guidance for the application, use and check of tamper verification features to the packaging of medicinal products.

This document specifies requirements for the provision and operation of indirect, temperature-controlled refrigerated delivery services for refrigerated parcels which contain temperature-sensitive goods (including foods) in land transportation. It includes all refrigerated delivery service stages from acceptance (receipt) of a chilled or frozen parcel from the delivery service user to its delivery at the designated destination, including intermediate transfer of the refrigerated parcels between ...view more

This document gives guidance on the application of a quality management system in the manufacture, measuring and monitoring of design type approved dangerous goods packaging, intermediate bulk containers (IBCs) and large packaging.
This document does not include guidance specific to other management systems, such as those for environmental management, occupational health and safety management, or financial management.
It is applicable to an organization that:
a) needs to demonstrate its abili...view more

This document gives guidance on the application of a quality management system in the manufacture, measuring and monitoring of design type approved dangerous goods packaging, intermediate bulk containers (IBCs) and large packaging. This document does not include guidance specific to other management systems, such as those for environmental management, occupational health and safety management, or financial management. It is applicable to an organization that: a) needs to demonstrate its ability ...view more

This document provides requirements and recommendations in designing consumer packages, independent of material, to increase accessibility with regard to handling and manipulation. The document considers packaging needs from a wide range of users with diverse human abilities and needs in diverse contexts of use. Handling and manipulation include human physical abilities like holding, lifting, carrying, pulling, pushing, sliding, grasping, twisting, tearing and any combination of those actions re...view more

This document specifies the methodology and procedure for determining the presence and minimization of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of Directive 94/62/EC, even for small and medium-sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumpt...view more

This document specifies the methodology and procedure for determining the presence and minimization of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of Directive 94/62/EC, even for small and medium-sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumpt...view more

This document specifies requirements and provides guidance for the application, use and check of tamper verification features to the packaging of medicinal products.

ISO 17480:2015 specifies requirements and recommendations for the accessible design for packaging with a focus on ease of opening. It applies to reclosable and non-reclosable consumer packaging without using any other mechanical means. This International Standard covers the design aspects addressing openability including opening location, opening methods, as well as evaluation techniques, both instrumented and user-based. This International Standard is primarily for designers, developers, and ev...view more

This document provides general recommendations to be taken into consideration when determining the most suitable type of packaging for products intended for consumers. The functions that packaging can perform include, but are not limited to, containment, protection, handling, transport, storage, convenience, information and presentation. This document also considers the sustainable use of resources covering optimization, reuse and recovery of packaging. This document provides guidance to: — prod...view more

ISO 17480:2015 specifies requirements and recommendations for the accessible design for packaging with a focus on ease of opening. It applies to reclosable and non-reclosable consumer packaging without using any other mechanical means. This International Standard covers the design aspects addressing openability including opening location, opening methods, as well as evaluation techniques, both instrumented and user-based. This International Standard is primarily for designers, developers, and ev...view more

This document specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non-pharmaceutical products. This document is intended for type approval only (see 2.5) and is not intended for quality assurance purposes. This document applies to non-reclosable packages of the single-use type consisting of one or more individual units. Non-reclosable packages for pharmaceutical products are excluded from th...view more

This document specifies performance requirements and methods of test for non-reclosable packaging that have been designated child-resistant. This document is intended for type approval only (see 3.5) and is not intended for quality assurance purposes.

This part of IEC 60286 describes the common dimensions, tolerances and characteristics of
the tray. It includes only those dimensions that are essential for the handling of the trays for
the stated purpose and for placing or removing components from the trays.
Matrix trays are designed to facilitate the transport and handling of electronic components
during their testing, baking, transport/storage, and final mounting by automatic placement
equipment.
The generic rules for their design are ...view more

ISO 19809:2017 provides requirements and recommendations concerning accessible design of consumer packaging with regard to information and marking. This document specifies considerations and methods for designing and presenting information and marking to make consumer packages accessible to people with the widest range of capabilities by considering their sensory and cognitive abilities. This document applies to all types of information and marking presented on consumer packaging. Specifically e...view more

ISO 15394:2017: - specifies the minimum requirements for the design of labels containing linear bar code and two-dimensional symbols on transport units to convey data between trading partners; - provides for traceability of transported units using a unique transport unit identifier (licence plate); - provides guidance on the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form; - provides specific recommendations regarding the choice of bar ...view more

ISO 28219:2017 - defines minimum requirements for identifying items, - provides guidelines for item marking with machine-readable symbols, - covers both labels and direct marking of items, - includes testing procedures for label adhesive characteristics and mark durability, - provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form, - is intended for applications which include, but are not limited to, support of systems...view more

ISO/TS 17451-2:2017 specifies a common XML structure for the transmission of inventory information for shipments of household goods and personal effects between moving companies and their external partners. The Inventory XSD defined in Clause 5 specifies the XML structure to be used. Each XML document corresponds to one shipment carried by land, sea or air.

This European Standard specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non-pharmaceutical products. This standard is intended for type approval only (2.5) and is not intended for quality assurance purposes.
This European Standard applies to non-reclosable packages of the single-use type consisting of one or more individual units.
Non-reclosable packages for pharmaceutical products are ...view more

This European Standard specifies performance requirements and methods of test for non-reclosable packaging that have been designated child-resistant. This standard is intended for type approval only (see 3.5) and is not intended for quality assurance purposes.