EN 4530-002:2024

Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves

This document provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

Luft- und Raumfahrt - Dichtungshülse zur Verwendung in Verbindungselementen - Teil 002: Übersicht und Verwendung der Dichtungshülse

Dieses Dokument stellt eine Übersicht über die in den Produktnormen festgelegten demontierbaren Dichtungshülsen zur Verwendung in Steckverbindern oder anderen elektrischen Verbindungselementen zur Verfügung.

Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion - Partie 002 : Liste et utilisation des manchons d’étanchéité

Le présent document fournit une liste de manchons d’étanchéité amovibles tels que définis dans les normes de produits, utilisés dans les connecteurs ou autres organes électriques de connexion.

Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 002. del: Seznam in uporaba tesnilnih puš

Ta dokument vsebuje seznam odstranljivih tesnilnih puš, opredeljenih v standardih za izdelke, za uporabo v konektorjih ali drugih električnih veznih elementih.

General Information

• Status: Published
• Publication Date: 18-Jun-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Jun-2024
• Completion Date: 19-Jun-2024
• Ref Project: SIST EN 4530-002:2024 - Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves

Relations

• Replaces: EN 4530-002:2006 - Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves
• Effective Date: 31-Mar-2021

Overview

EN 4530-002:2024 is a key European standard developed by CEN that focuses on sealing sleeves used in aerospace electrical connection elements. This document provides a comprehensive list and utilization guidelines for removable sealing sleeves as specified in relevant aerospace product standards. It supersedes the previous 2006 edition, incorporating critical updates such as refined compatibility data and revised normative references.

The standard is essential for ensuring the reliability and environmental protection of connectors and electrical components in aerospace applications. It is applicable across a wide temperature range (-65°C to 200°C), addressing high-performance requirements typical in aerospace electrical systems.

Key Topics

• Scope and Purpose
  EN 4530-002:2024 defines a list of removable sealing sleeves tailored for connectors and electrical elements in aerospace. The document standardizes their utilization to ensure consistent sealing performance and durability.

• Compatibility and Utilization
  The standard includes a detailed table referencing the designations, contact types, and elements of connection compatible with each sealing sleeve. This supports engineers and manufacturers in selecting the right sealing components for specific aerospace connectors.

• Temperature Ranges
  Sealing sleeves listed in the document support continuous operation in temperature ranges from -65°C up to 200°C, meeting the thermal demands of aerospace electrical hardware.

• Referenced Product Standards
  The standard integrates with multiple product standards, including:

  • EN 3155 series (Electrical contacts)
  • EN 3372-002 (Circular connectors with bayonet coupling)
  • EN 3645-002 (Circular connectors with triple start threaded coupling)
  • EN 3682-002 and EN 4165-002 (Rectangular connectors)
  • MIL-DTL-38999/62 (US Military specification sealing boots)
  • EN 4530 parts 004, 005, and 006 (Sealing sleeves for specific cable diameters)

• Technical Updates
  Key technical improvements over the 2006 version include elimination of previous inaccuracies regarding sleeve-connector compatibility and updating the normative references to reflect current aerospace connector standards.

Applications

EN 4530-002:2024 is designed to support aerospace industry professionals involved in:

• Connector manufacturing
  Ensuring the sealing sleeves used in connector assemblies meet defined performance and environmental sealing criteria.

• Electrical system design
  Selecting appropriate sealing sleeves to maintain electrical connection integrity under severe aerospace conditions such as extreme temperatures, vibration, and exposure to fluids.

• Maintenance and repair operations
  Identifying compatible sealing sleeves for replacing or servicing existing aerospace connectors, improving reliability and preventing ingress of contaminants.

• Quality and compliance assurance
  Verifying that aerospace sealing sleeves meet harmonized European standards for removable sealing components, facilitating certification and global market acceptance.

Related Standards

• EN 4530-004:2024
  Product standard for sealing sleeves for external cable diameters 3 mm to 5.8 mm.

• EN 4530-005:2024
  Product standard for sealing sleeves for external cable diameters 3 mm to 4.1 mm.

• EN 4530-006:2024
  Product standard for sealing sleeves for external cable diameters 4.68 mm to 5.05 mm.

• EN 3155 series
  Aerospace electrical contacts for connection elements.

• MIL-DTL-38999/62
  US Department of Defense specification covering sealing boots for circular electrical connectors.

Practical Value

By adhering to EN 4530-002:2024, aerospace manufacturers and system integrators benefit from:

• Standardized sealing sleeve selection that reduces errors and incompatibilities in design.
• Enhanced environmental protection of electrical connectors against moisture, dust, and other contaminants.
• Improved long-term durability of aerospace electrical connections under demanding operational conditions.
• Facilitated regulatory compliance by aligning with harmonized European and international aerospace standards.

---

Keywords: EN 4530-002:2024, aerospace sealing sleeves, electrical connectors, removable sealing sleeves, aerospace standards, connector sealing, aerospace electrical systems, environmental sealing, connector compatibility, CEN aerospace standard.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 002. del: Seznam in
uporaba tesnilnih puš
Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and
utilization of sealing sleeves
Luft- und Raumfahrt - Dichtungshülse zur Verwendung in Verbindungselementen - Teil
002: Übersicht und Verwendung der Dichtungshülse
Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion -
Partie 002 : Liste et utilisation des manchons d’étanchéité
Ta slovenski standard je istoveten z: EN 4530-002:2024
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4530-002
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4530-002:2006
English Version
Aerospace series - Sealing sleeves used in elements of
connection - Part 002: List and utilization of sealing
sleeves
Série aérospatiale - Manchons d'étanchéité utilisés Luft- und Raumfahrt - Dichtungshülse zur Verwendung
dans les organes de connexion - Partie 002 : Liste et in Verbindungselementen - Teil 002: Übersicht und
utilisation des manchons d'étanchéité Verwendung der Dichtungshülse
This European Standard was approved by CEN on 14 February 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4530-002:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 List and utilization of sealing sleeves . 5

European foreword
This document (EN 4530-002:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards
shall be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the el
...