EN ISO 19085-1:2017
(Main)Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
ISO 19085-1:2017 gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common to machines used in the woodworking industry. It is applicable to woodworking, stationary and displaceable machines when they are used as intended and under the conditions foreseen by the manufacturer.
NOTE 1 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
ISO 19085-1:2017 is intended to be used in conjunction with the other parts of ISO 19085, applicable to specific machine types.
ISO 19085-1:2017 is not applicable to machines intended for use in potential explosive atmospheres or to machines manufactured prior to the date of its publication.
NOTE 2 Machines for capturing and extracting dust are covered by EN 12779 and EN 16770.
Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO 19085-1:2017)
Dieser Teil von ISO 19085 enthält die Sicherheitsanforderungen und Maßnahmen zur Reduzierung der Risiken in Bezug auf Holzbearbeitungsmaschinen, die sich aus Betrieb, Einstellung, Instandhaltung, Transport, Montage, Demontage, Außerbetriebsetzung und Verschrottung ergeben — solche, die Maschinen, die in der Holzwirtschaft verwendet werden, gemeinsam sind. Er ist anwendbar auf stationäre und verschiebbare Holzbearbeitungsmaschinen, wenn diese bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen verwendet werden.
Er ist vorgesehen, um in Verbindung mit anderen Teilen von ISO 19085, die für bestimmte Typen von Maschinen anwendbar sind, verwendet zu werden.
Er gilt nicht für Maschinen, die zur bestimmungsgemäßen Verwendung in potentiell explosiven Atmosphären vorgesehen sind oder für Maschinen, die vor dem Datum seiner Veröffentlichung hergestellt wurden.
ANMERKUNG Maschinen zur Erfassung und Absaugung von Staub werden in EN 12779 und EN 16770 behandelt.
Machines à bois - Sécurité - Partie 1: Exigences communes (ISO 19085-1:2017)
ISO 19085-1:2017 donne les exigences de sécurité et les mesures pour réduire les risques relatifs aux machines à bois survenant pendant le fonctionnement, le réglage, la maintenance, le transport, l'assemblage, le démontage, la mise hors service et la mise au rebut et qui sont communes aux machines utilisées dans l'industrie du bois. Il est applicable aux machines à bois, fixes et transportables, lorsqu'elles sont utilisées comme prévu et dans les conditions prévues par le fabricant.
NOTE 1 Pour les phénomènes dangereux pertinents mais non significatifs, par exemple, les arêtes vives du bâti de la machine, voir l'ISO 12100:2010.
Il est destiné à être utilisé conjointement avec les autres parties de l'ISO 19085, applicables aux types spécifiques de machine.
Il n'est pas applicable aux machines prévues pour une utilisation en atmosphères explosibles, ni aux machines fabriquées avant sa date de publication.
NOTE 2 Les machines de captage et d'extraction de poussières sont couvertes par les EN 12779 et EN 16770.
Lesnoobdelovalni stroji - Varnost - 1. del: Splošne zahteve (ISO 19085-1:2017)
Ta mednarodni standard se uporablja za lesnoobdelovalne stroje z orodji za rezanje in/ali brušenje, kot so določeni v točki 3.1, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji, ki jih določa proizvajalec. Ta dokument vsebuje varnostne zahteve in ukrepe za zmanjšanje tveganj, ki so prisotna pri upravljanju, prilagajanju, transportu, sestavljanju, razstavljanju, onemogočanju in razrezovanju lesnoobdelovalnih strojev ter so skupna večini takih strojev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2017
Lesnoobdelovalni stroji - Varnost - 1. del: Splošne zahteve (ISO 19085-1:2017)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO
19085-1:2017)
Machines à bois - Sécurité - Partie 1: Exigences communes (ISO 19085-1:2017)
Ta slovenski standard je istoveten z: EN ISO 19085-1:2017
ICS:
13.110 Varnost strojev Safety of machinery
79.120.10 Lesnoobdelovalni stroji Woodworking machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19085-1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 13.110; 79.120.10
English Version
Woodworking machines - Safety - Part 1: Common
requirements (ISO 19085-1:2017)
Machines à bois - Sécurité - Partie 1: Exigences Holzbearbeitungsmaschinen - Sicherheit - Teil 1:
communes (ISO 19085-1:2017) Gemeinsame Anforderungen (ISO 19085-1:2017)
This European Standard was approved by CEN on 12 September 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-1:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 19085-1:2017) has been prepared by Technical Committee ISO/TC 39 “Machine
tools” in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19085-1:2017 has been approved by CEN as EN ISO 19085-1:2017 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European standard has been prepared under a Commission’s standardisation request "M/396
Mandate to CEN and CENELEC for standardisation in the field of machinery” to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive
2006/42/EC, compliance with the normative clauses of this standard given in Table ZA.1 confers,
within the limits of the scope of this standard, a presumption of conformity with the corresponding
essential requirements of that Directive 2006/42/EC, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Article(s) of Directive
2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2006/42/EC this EN
To confer a presumption of
conformity with the relevant
essential requirements of
Directive 2006/42/EC, this
standard (providing common
requirements for a whole
machine family) has to be
applied together with one of
those standards as specified in
the scope (providing specific
requirements for a particular
category of machinery within
this family), once this standard
is cited in the Official Journal of
the European Communities
under Directive 2006/42/EC.
This part of EN ISO 19085 is intended to be used in conjunction with the other parts of EN ISO 19085,
applicable to specific machine types, as stated in the Scope. This means that the requirements of this
part alone may not be enough to fulfil the Essential Requirements of the Machinery Directive 2006/42.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 19085-1
First edition
2017-07
Woodworking machines — Safety —
Part 1:
Common requirements
Machines à bois — Sécurité —
Partie 1: Exigences communes
Reference number
ISO 19085-1:2017(E)
©
ISO 2017
ISO 19085-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 19085-1:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 List of significant hazards . 6
5 Safety requirements and measures for controls . 9
5.1 Safety and reliability of control systems . 9
5.2 Control devices .10
5.3 Start .10
5.4 Safe stops .11
5.4.1 General.11
5.4.2 Normal stop .11
5.4.3 Operational stop .11
5.4.4 Emergency stop .11
5.5 Braking function of tool spindles .12
5.6 Mode selection .12
5.7 Spindle speed changing .13
5.7.1 Spindle speed changing by changing belts on the pulleys .13
5.7.2 Spindle speed changing by incremental speed change motor .13
5.7.3 Infinitely variable speed by frequency inverter .13
5.8 Failure of any power supply .14
5.9 Manual reset control .14
5.10 Enabling control .14
5.11 Machine moving parts speed monitoring .14
5.12 Time delay .15
6 Safety requirements and measures for protection against mechanical hazards .15
6.1 Stability .15
6.1.1 Stationary machines .15
6.1.2 Displaceable machines .15
6.2 Risk of break-up during operation .15
6.3 Tool holder and tool design.15
6.3.1 General.15
6.3.2 Spindle locking .16
6.3.3 Circular sa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.