EN ISO 3785:2006

Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)

ISO 3785:2006 specifies a method for designating test specimen axes in relation to product texture by means of an X-Y-Z orthogonal coordinate system.
The system applies equally to unnotched and notched (or precracked) test specimens.
The method is intended only for metallic materials with uniform texture that can be unambiguously determined.

Metallische Werkstoffe - Kennzeichnung von Probenachsen in Bezug zur Halbzeuggefügetextur (ISO 3785:2006)

In dieser Internationalen Norm ist ein Verfahren zur Kennzeichnung von Probenachsen in Bezug zur Halbzeuggefügetextur mit Hilfe eines rechtwinkligen X-Y-Z-Koordinatensystems festgelegt.
Das System gilt gleichermaßen für ungekerbte und gekerbte (oder angerissene) Proben.
Das Verfahren ist nur für metallische Werkstoffe mit einheitlichem Gefüge vorgesehen, das eindeutig bestimmt werden kann.
Über die Orientierung der Probe wird vor deren Bearbeitung entschieden, sie wird in Übereinstimmung mit dem hier beschriebenen System,  festgelegt in dieser Internationalen Norm festgelegt und aufgezeichnet.

Matériaux métalliques - Désignation des axes des éprouvettes en relation avec la texture du produit (ISO 3785:2006)

L'ISO 3785:2005 spécifie une méthode pour désigner les axes des éprouvettes en relation avec la texture du produit au moyen d'un système orthogonal de coordonnées X-Y-Z.
Le système s'applique aussi bien aux éprouvettes sans entaille et qu'aux éprouvettes entaillées (ou préfissurées).
La méthode est destinée seulement aux matériaux métalliques de texture uniforme qui peut être déterminée sans ambiguïté.

Kovinski materiali – Označevanje osi preskusnih vzorcev glede na teksturo snovi vzorca (ISO 3785:2006)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2006
• Withdrawal Date: 30-May-2023
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 1 - Steel - Mechanical testing
• Ref Project: SIST EN ISO 3785:2006 - Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)

Relations

• Replaces: EN ISO 3785:1995 - Steel - Designation of test piece axes (ISO 3785:1976)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 3785:2023 - Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3785:2006
01-maj-2006
1DGRPHãþD
SIST EN ISO 3785:1996
.RYLQVNLPDWHULDOL±2]QDþHYDQMHRVLSUHVNXVQLKY]RUFHYJOHGHQDWHNVWXURVQRYL
Y]RUFD,62
Metallic materials - Designation of test specimen axes in relation to product texture (ISO
3785:2006)
Metallische Werkstoffe - Kennzeichnung von Probenachsen in Bezug zur
Halbzeuggefügetextur (ISO 3785:2006)
Matériaux métalliques - Désignation des axes des éprouvettes en relation avec la texture
du produit (ISO 3785:2006)
Ta slovenski standard je istoveten z: EN ISO 3785:2006
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 3785:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3785:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 3785:2006
EUROPEAN STANDARD
EN ISO 3785
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 77.040.10 Supersedes EN ISO 3785:1995
English Version
Metallic materials - Designation of test specimen axes in relation
to product texture (ISO 3785:2006)
Matériaux métalliques - Désignation des axes des Metallische Werkstoffe - Kennzeichnung von
éprouvettes en relation avec la texture du produit (ISO Probenachsen im Bezug zur Halbzeuggefügetextur (ISO
3785:2006) 3785:2006)
This European Standard was approved by CEN on 16 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3785:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3785:2006

EN ISO 3785:2006 (E)





Foreword


This document (EN ISO 3785:2006) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 1 "Steel -
Mechanical testing", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.

This document supersedes EN ISO 3785:1995.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 3785:2006 has been approved by CEN as EN ISO 3785:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3785:2006


INTERNATIONAL ISO
STANDARD 3785
Second edition
2006-02-01

Metallic materials — Designation of test
specimen axes in relation to product
texture
Matériaux métalliques — Désignation des axes des éprouvettes en
relation avec la texture du produit




Reference number
ISO 3785:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

SIST EN ISO 3785:2006
ISO 3785:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporate
...