EN 845-3:2013+A1:2016

Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork

This European Standard specifies the requirements for masonry bed joint reinforcement for structural use (see 5.2.1) and for non-structural use (see 5.2.2).
Where products are intended for use in cavity wall construction, this European Standard covers only the performance of the meshwork as reinforcement in bed joints and not its performance as wall ties across the cavity.
This European Standard is not applicable to:
a)   products in the form of individual bars or rods;
b)   products formed from materials other than specified grades of austenitic stainless steel, austenitic ferritic stainless steel, zinc pre-coated steel sheet or zinc coated steel wire with or without organic coating.
NOTE   Annex ZA refers only to welded wire meshwork intended for structural use referred to in 5.2.1 as there are no known regulated requirements for products of this family for non-structural use.

Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 3: Lagerfugenbewehrung aus Stahl

Spécifications pour composants accessoires de maçonnerie - Partie 3: Treillis d'armature en acier pour joints horizontaux

La présente Norme européenne spécifie les exigences concernant les armatures pour les joints horizontaux de maçonnerie à usage structurel (voir 5.2.1) et non structurel (voir 5.2.2).
Dans le cas où les produits sont destinés à être utilisés dans la construction de murs doubles, la présente Norme européenne couvre uniquement les performances des treillis employés comme armatures pour les joints horizontaux et ne s'applique pas aux performances du treillis utilisé comme attache pour mur double traversant la cavité.
Les produits suivants ne sont pas couverts par la présente Norme européenne :
a)   produits sous forme de barres ou de tiges individuelles ;
b)   produits fabriqués à partir de matériaux autres que les classes spécifiées d'acier inoxydable austénitique, d'acier inoxydable austéno-ferritique, de tôle d'acier pré-galvanisé ou de fil d'acier galvanisé, avec ou sans revêtement organique.
NOTE   Étant donné l'absence d'exigences réglementaires connues pour les produits de cette famille destinés à un usage non structurel, l'Annexe ZA fait uniquement référence aux treillis en fils soudé destinés à un usage structurel tel qu'indiqué en 5.2.1.

Specifikacija za dodatne komponente zidovja - 3. del: Jeklene mreže za armiranje naležnih reg

Ta evropski standard določa zahteve za armiranje naležnih reg zidovja za konstrukcijsko (5.2.1) in nekonstrukcijsko uporabo (5.2.2).
Za izdelke, namenjene za uporabo v zidu z votlino, ta evropski standard zajema samo delovanje mrež kot armature v naležnih regah in ne njihovega delovanja kot zidnih stremen v votlini.
Ta evropski standard se ne uporablja za:
a) izdelke, kot so posamezne palice ali drogovi;
b) izdelke iz materialov, ki se razlikujejo od podanih vrst avstenitnega nerjavnega jekla, avstenitnega feritnega nerjavnega jekla, pocinkane jeklene plošče ali pocinkane jeklene žice z organsko prevleko ali brez nje.
OPOMBA: Dodatek ZA se nanaša samo na varjene žičnate mreže, ki so namenjene za konstrukcijsko uporabo kot v 5.2.1, saj ni znanih drugih predpisanih zahtev za izdelke iste družine za nekonstrukcijsko uporabo.

General Information

• Status: Published
• Publication Date: 26-Jul-2016
• Withdrawal Date: 29-Apr-2018
• ICS: 91.080.30 - Masonry
• Technical Committee: CEN/TC 125 - Masonry
• Drafting Committee: CEN/TC 125/WG 3 - Ancillary components
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Jul-2016
• Completion Date: 27-Jul-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Ref Project: SIST EN 845-3:2013+A1:2016 - Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork

Relations

• Merged From: EN 845-3:2013/FprA1:2015 - Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
• Effective Date: 19-Jan-2023
• Merged From: EN 845-3:2013 - Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 845-3:2013+A1:2016
01-november-2016
1DGRPHãþD
SIST EN 845-3:2013
Specifikacija za dodatne komponente zidovja - 3. del: Jeklene mreže za armiranje
naležnih reg
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of
steel meshwork
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 3: Lagerfugenbewehrung aus
Stahl
Spécifications pour composants accessoires de maçonnerie - Partie 3: Treillis d'armature
en acier pour joints horizontaux
Ta slovenski standard je istoveten z: EN 845-3:2013+A1:2016
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
91.080.30 Zidane konstrukcije Masonry
SIST EN 845-3:2013+A1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 845-3:2013+A1:2016

---------------------- Page: 2 ----------------------

SIST EN 845-3:2013+A1:2016


EN 845-3:2013+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2016
EUROPÄISCHE NORM
ICS 91.080.30 Supersedes EN 845-3:2013
English Version

Specification for ancillary components for masonry - Part
3: Bed joint reinforcement of steel meshwork
Spécifications pour composants accessoires de Festlegungen für Ergänzungsbauteile für Mauerwerk -
maçonnerie - Partie 3: Treillis d'armature en acier pour Teil 3: Lagerfugenbewehrung aus Stahl
joints horizontaux
This European Standard was approved by CEN on 21 March 2013 and includes Amendment 1 approved by CEN on 9 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 845-3:2013+A1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 845-3:2013+A1:2016
EN 845-3:2013+A1:2016 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 7
4 Materials and types of products . 8
4.1 Materials . 8
4.2 Types of products . 11
4.2.1 General . 11
4.2.2 Welded wire meshwork . 11
4.2.3 Woven wire meshwork .
...