EN ISO 10642:2004/A1:2012
(Amendment)Hexagon socket countersunk head screws (ISO 10642:2004/Amd 1:2012)
Hexagon socket countersunk head screws (ISO 10642:2004/Amd 1:2012)
2012-02-17 EMA: Draft for // vote received in ISO/CS (see notification of 2012-02-16 in dataservice).
MINOR AMENDMENT MINOR AMENDMENT MINOR AMENDMENT MINOR AMENDMENT
Senkschrauben mit Innensechskant (ISO 10642:2004/Amd 1:2012)
N/A
Vis à tête fraisée à six pans creux (ISO 10642:2004/Amd 1:2012)
Vijaki z ugrezno glavo in notranjim šestkotnikom (ISO 10642:2004/Amd 1:2012)
Ta mednarodni standard določa značilnosti vijakov z ugrezno glavno in notranjim šestkotnikom z navoji od M3 do vključno M20 ter z razredom izdelave A in razredi trdnosti 8,8, 10,9 in 12,9.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2013
Vijaki z ugrezno glavo in notranjim šestkotnikom (ISO 10642:2004/Amd 1:2012)
Hexagon socket countersunk head screws (ISO 10642:2004/Amd 1:2012)
Senkschrauben mit Innensechskant (ISO 10642:2004/Amd 1:2012)
Vis à tête fraisée à six pans creux (ISO 10642:2004/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 10642:2004/A1:2012
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10642:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.10
English Version
Hexagon socket countersunk head screws (ISO
10642:2004/Amd 1:2012)
Vis à tête fraisée à six pans creux (ISO 10642:2004/Amd Senkschrauben mit Innensechskant (ISO 10642:2004/Amd
1:2012) 1:2012)
This amendment A1 modifies the European Standard EN ISO 10642:2004; it was approved by CEN on 9 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10642:2004/A1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword . 3
Foreword
This document (EN ISO 10642:2004/A1:2012) has been prepared by Technical Committee ISO/TC 2
“Fasteners” of the International Organization for Standardization (ISO) has been taken over as an amendment
to the European Standard by Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held
by DIN.
This Amendment to the European Standard EN ISO 10642:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and
conflicting national standards shall be withdrawn at the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for id
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.