EN 16223-2:2022

Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 2: Automotive interior applications

This document specifies requirements for the designations and descriptions used in the exchange of goods when exhibiting, promoting (e.g. advertising and labelling), and placing on the market when leather is used in automotive interiors.
This document provides general guidelines intended to be applied in the designation and description of automotive seating and interiors when reference is made to leather as a constituent material.
The designation or description of leather used in upholstered furniture, leather in footwear, leather goods and leather clothing including gloves are not covered by this document.

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen - Teil 2: Verwendungen im Automobilinnenbereich

Dieses Dokument legt die Anforderungen an die Bezeichnungen und Beschreibungen fest, die im Rahmen des Warenaustausches beim Ausstellen, bei der Verkaufsförderung (z. B. Werbung und Etikettierung) und beim Inverkehrbringen verwendet werden, wenn Leder bei der Innenausstattung von Automobilen verwendet wird.
Dieses Dokument stellt allgemeine Leitlinien zur Verfügung, die zur Anwendung bei der Bezeichnung und Beschreibung von Sitzen und Innenausstattungen von Automobilen vorgesehen sind, wenn auf Leder als Materialbestandteil hingewiesen wird.
Die Bezeichnung oder Beschreibung von Leder in Polstermöbeln, Leder in Schuhen, Lederwaren und bei Lederbekleidung einschließlich Handschuhen wird in diesem Dokument nicht behandelt.

Cuir - Exigences relatives à la désignation et à la description du cuir des garnitures et intérieurs automobiles - Partie 2 : Intérieurs automobiles

Le présent document spécifie les exigences relatives aux désignations et descriptions utilisées dans le cadre des échanges de marchandises lors de l’exposition, de la promotion (par exemple, publicité et étiquetage) et de la mise sur le marché lorsque le cuir est utilisé dans l’habitacle des véhicules automobiles.
Le présent document fournit des lignes directrices générales destinées à être appliquées pour désigner et décrire les sièges et banquettes ainsi que les intérieurs automobiles lorsqu’il est fait référence au cuir comme matériau constitutif.
La désignation ou la description du cuir utilisé dans les meubles capitonnés, les chaussures, les articles de maroquinerie et les vêtements en cuir, y compris les gants, ne sont pas traitées dans le présent document.

Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in avtomobilsko notranjo opremo - 2. del: Avtomobilska notranja oprema

Ta evropski standard določa zahteve za označevanje in opisovanje, ki se naj uporabljata v javni ali komercialni komunikaciji, na nalepkah ali opisih izdelkov, ko se usnje uporablja za oblazinjenje pohištva in avtomobilsko notranjo opremo.
Ta dokument ne zajema označevanja ali opisovanja usnja, ki se uporablja za obutev, usnjene izdelke in usnjena oblačila, vključno z rokavicami.

General Information

• Status: Published
• Publication Date: 05-Jul-2022
• Withdrawal Date: 30-Jan-2023
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 4 - Technical specifications on the use of leather and terminology
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Jul-2022
• Due Date: 18-Nov-2021
• Completion Date: 06-Jul-2022
• Ref Project: SIST EN 16223-2:2022 - Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 2: Automotive interior applications

Relations

• Replaces: EN 16223:2012 - Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications
• Effective Date: 13-Jul-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN 16223:2013
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in
avtomobilsko notranjo opremo - 2. del: Avtomobilska notranja oprema
Leather - Requirements for the designation and description of leather in upholstery and
automotive interior applications - Part 2: Automotive interior applications
Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen
und die Innenausstattung von Automobilen - Teil 2: Verwendungen im
Automobilinnenbereich
Cuir - Exigences relatives à la désignation et à la description du cuir des garnitures et
intérieurs automobiles - Partie 2 : Intérieurs automobiles
Ta slovenski standard je istoveten z: EN 16223-2:2022
ICS:
43.020 Cestna vozila na splošno Road vehicles in general
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16223-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN 16223:2012
English Version
Leather - Requirements for the designation and
description of leather in upholstery and automotive
interior applications - Part 2: Automotive interior
applications
Cuir - Exigences relatives à la désignation et à la Leder - Anforderungen an Bezeichnung und
description du cuir des garnitures et intérieurs Beschreibung von Leder für Polsterungen und die
automobiles - Partie 2 : Intérieurs automobiles Innenausstattung von Automobilen - Teil 2:
Verwendungen im Automobilinnenbereich
This European Standard was approved by CEN on 22 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16223-2:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General principles . 6
5 Requirements . 6
6 Designation and description . 7
Bibliography . 8

European foreword
This document (EN 16223-2:2022) has been prepared by Technical Committee CEN/TC 289 “Leather”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 16223-1, supersedes EN 16223:2012.
This document, together with
In comparison with the previous edition, the following technical modifications have been made:
— EN 16223:2012, Leather - Requirements for the designation and description of leather in upholstery
and automotive interior applications has been split into two parts:
— Part 1 - Upholstery applications;
— Part 2 - Automotive interior application (this document).
— Modification in Clause 1 “Scope”, Clause 4 “General principles”, Clause 5 “Requirements” and
Clause 6 “Designation”.
— Editorial updates.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document is based on the Code of Practice of the International Council of Tanners (ICT) – Code of
Practice on the appropriate designation of leather used in automotive applications (Hong Kong, 30 March
2009).
In the absen
...