EN 13631-16:2004
(Main)Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
This document specifies a method for determination of the quantity of nitrogen oxides and carbon oxides produced by the detonation of explosives for use in underground works.
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 16: Nachweis und Messung von toxischen Schwadenbestandteilen
Dieses Dokument legt ein Verfahren zur Bestimmung der Menge an Stickstoff- und Kohlenstoffoxiden fest, die durch die Detonation von Sprengstoffen zur Verwendung für untertägige Arbeiten entstehen.
Explosifs à usage civil - Explosifs - Partie 16: Détection et mesurage des gaz toxiques
Le présent document décrit une méthode de détermination de la quantité d’oxydes d’azote et d’oxydes de
carbone produits par la détonation des explosifs utilisés en travaux souterrains.
Eksplozivi za civilno uporabo – Razstreliva – 16. del: Odkrivanje in merjenje strupenih plinov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gasesEksplozivi za civilno uporabo – Razstreliva – 16. del: Odkrivanje in merjenje strupenih plinovExplosifs a usage civil - Explosifs - Partie 16: Détection et mesurage des gaz toxiquesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 16: Nachweis und Messung von toxischen SchwadenbestandteilenTa slovenski standard je istoveten z:EN 13631-16:2004SIST EN 13631-16:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13631-16:200401-november-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-16August 2004ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 16: Detectionand measurement of toxic gasesExplosifs à usage civil - Explosifs - Partie 16: Détection etmesure des gaz toxiques az toxiquesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 16:Nachweis und Messung von toxischenSchwadenbestandteilenThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-16:2004: E
Range of applicability of the test method.6 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/15 EEC.7
Part 1: Requirements EN 13631-2
Part 2: Determination of thermal stability of explosives EN 13631-3
Part 3: Determination of sensitiveness to friction of explosives EN 13631-4
Part 4: Determination of sensitiveness to impact of explosives EN 13631-5
Part 5: Determination of resistance to water EN 13631-6
Part 6: Determination of resistance to hydrostatic pressure EN 13631-7
Part 7: Determination of safety and reliability at extreme temperatures EN 13631-10
Part 10: Verification of the means of initiation EN 13631-11
Part 11: Determination of transmission of detonation prEN 13631-12 Part 12: Specification of boosters with different initiating capability EN 13631-13
Part 13: Determination of density EN 13631-14
Part 14: Determination of velocity of detonation prEN 13631-15
Part 15: Calculation of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.