FprEN 4114

Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses

This document specifies the required characteristics of loop style clamps ("P" type) in aluminium alloy with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
They are used up to 80 °C max.
Usage at a higher temperature is at the option of the user.
For temperature range and environmental considerations, see the various cushion material standards.

Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus Aluminiumlegierung mit Profilgummi - Maße, Massen

Série aérospatiale - Colliers, boucle en P en alliage d’aluminium avec profilé en élastomère - Dimensions, masses

Le présent document spécifie les caractéristiques requises pour les colliers à boucle en P, en alliage d’aluminium, avec différents matériaux pour les profilés (garnitures).
Ces colliers sont utilisés pour maintenir les tuyauteries et les faisceaux de câbles électriques à usage aérospatial.
Ils sont utilisés jusqu'à 80 °C max.
L’utilisation à une température plus élevée est au choix de l’utilisateur.
Pour les plages de températures et les conditions environnementales, voir les normes des différents matériaux pour les profilés.

Aeronavtika - Objemke v obliki zanke (P-oblika) iz aluminijeve zlitine z zaščitno prevleko iz gume - Mere, mase

General Information

• Status: Not Published
• Publication Date: 17-Dec-2023
• ICS: 49.030.99 - Other fasteners
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 3 - Hydraulics
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 15-Oct-2023
• Completion Date: 15-Oct-2023
• Ref Project: kSIST FprEN 4114:2023 - Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning - Dimensions, masses

Relations

• Revises: EN 4114:2009 - Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4114:2022
01-september-2022
Aeronavtika - Objemke v obliki zanke (P-oblika) iz aluminijeve zlitine z zaščitno
prevleko iz gume - Mere, mase
Aerospace series - Clamps, loop ("P" type) in aluminium alloy, with rubber cushioning -
Dimensions, masses
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus Aluminiumlegierung mit
Profilgummi - Maße, Massen
Série aérospatiale - Colliers en “P” en alliage d’aluminium avec profilé en élastomère -
Dimensions, masses
Ta slovenski standard je istoveten z: prEN 4114
ICS:
49.025.20 Aluminij Aluminium
49.025.40 Guma in polimerni materiali Rubber and plastics
49.030.99 Drugi vezni elementi Other fasteners
oSIST prEN 4114:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4114:2022

---------------------- Page: 2 ----------------------
oSIST prEN 4114:2022


DRAFT
EUROPEAN STANDARD
prEN 4114
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2022
ICS 49.030.99 Will supersede EN 4114:2009
English Version

Aerospace series - Clamps, loop ("P" type) in aluminium
alloy, with rubber cushioning - Dimensions, masses
Série aérospatiale - Colliers en "P" en alliage Luft- und Raumfahrt - Schellen in Schlaufenform (P-
d'aluminium avec profilé en élastomère - Dimensions, Form) aus Aluminiumlegierung mit Profilgummi -
masses Maße, Massen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4114:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4114:2022
prEN 4114:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Materials . 4
4.2 Surface treatment . 5
4.3 Configuration – Dimensions – Masses . 5
5 Designation . 10
6 Marking .
...