Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads

This European Standard specifies the characteristics of plain bushes in corrosion resisting steel with self lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 C to 163 C and assembly with an interference fit into fixed and moving aerospace parts.

Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit selbstschmierender Beschichtung - Maße und Belastungen

Dieses Dokument legt die Eigenschaften von Buchsen ohne Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung sowie die Konstruktionsempfehlung für Wellen und Gehäuse fest.
Die Buchsen sind für den Betrieb innerhalb eines Temperaturbereichs von −55 °C bis 163 °C und den Einbau mit Übermaßpassung in feste und bewegliche Luft- und Raumfahrtteile bestimmt.

Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture autolubrifiante - Dimensions et charges

Le présent document spécifie les caractéristiques des bagues cylindriques en acier résistant à la corrosion, à garniture autolubrifiante, ainsi que la recommandation de conception des arbres et des logements.
Les bagues sont prévues pour être utilisées dans une plage de températures de −55 °C à 163 °C et être montées par ajustement avec serrage dans des pièces fixes ou mobiles destinées à l’aérospatiale.

Aeronavtika - Drsne puše, navadne, iz korozijsko odpornega jekla s samomazalno oblogo - Mere in obremenitve

Ta evropski standard določa lastnosti drsnih puš iz korozijsko odpornega jekla s samomazalno oblogo ter priporočilo za projektiranje gredi in ohišij.
Puše so predvidene za uporabo v temperaturnem območju od –55 °C do 163 °C ter montažo z nateznim spojem v fiksnih in gibljivih delih aeronavtičnih vozil.

General Information

Status
Published
Publication Date
06-Sep-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
07-Sep-2022
Completion Date
07-Sep-2022

Relations

Buy Standard

Standard
EN 2287:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 2287:2021
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2287:2022
01-november-2022
Nadomešča:
SIST EN 2287:2017
Aeronavtika - Drsne puše, navadne, iz korozijsko odpornega jekla s samomazalno
oblogo - Mere in obremenitve
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner -
Dimensions and loads
Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit
selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture
autolubrifiante - Dimensions et charges
Ta slovenski standard je istoveten z: EN 2287:2022
ICS:
49.025.10 Jekla Steels
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 2287:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2287:2022

---------------------- Page: 2 ----------------------
SIST EN 2287:2022


EN 2287
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2022
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 2287:2017
English Version

Aerospace series - Bush, plain, in corrosion resisting steel
with self-lubricating liner - Dimensions and loads
Série aérospatiale - Bague cylindrique en acier Luft- und Raumfahrt - Buchse ohne Flansch aus
résistant à la corrosion à garniture autolubrifiante - korrosionbeständigem Stahl mit selbstschmierender
Dimensions et charges Beschichtung - Maße und Belastungen
This European Standard was approved by CEN on 26 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2287:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2287:2022
EN 2287:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Configuration — Dimensions — Masses . 4
4.2 Surface roughness . 4
4.3 Materials . 4
5 Designation . 8
6 Marking . 8
7 Technical specification . 8
8 Design recommendation .
...

SLOVENSKI STANDARD
oSIST prEN 2287:2021
01-februar-2021
Aeronavtika - Drsne puše, navadne, iz korozijsko odpornega jekla s samomazalno
oblogo - Mere in obremenitve
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner -
Dimensions and loads
Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit
selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture
autolubrifiante - Dimensions et charges
Ta slovenski standard je istoveten z: prEN 2287
ICS:
49.025.10 Jekla Steels
49.030.99 Drugi vezni elementi Other fasteners
oSIST prEN 2287:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2287:2021

---------------------- Page: 2 ----------------------
oSIST prEN 2287:2021


DRAFT
EUROPEAN STANDARD
prEN 2287
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2020
ICS 49.030.99 Will supersede EN 2287:2017
English Version

Aerospace series - Bush, plain, in corrosion resisting steel
with self-lubricating liner - Dimensions and loads
Série aérospatiale - Bague cylindrique en acier Luft- und Raumfahrt - Buchse ohne Flansch aus
résistant à la corrosion à garniture autolubrifiante - korrosionbeständigem Stahl mit selbstschmierender
Dimensions et charges Beschichtung - Maße und Belastungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2287:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2287:2021
prEN 2287:2020 (E)
Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Configuration — Dimensions — Masses . 4
4.2 Surface roughness . 4
4.3 Materials . 4
5 Designation. 8
6 Marking .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.