EN 4113:2023
(Main)Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
This document specifies the required characteristics of loop style clamps ("P" type) in corrosion resisting steel, passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert mit Profilgummi - Maße, Massen
Dieses Dokument legt die Anforderungen an Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert, mit verschiedenen Profilgummi-Werkstoffen fest.
Diese Schellen werden zur Halterung von Rohrleitungen und elektrischen Leitungsbündeln in der Luft- und Raumfahrt verwendet.
Für den Temperaturbereich und die Umweltbedingungen siehe die Angaben in den jeweiligen Werkstoffnormen für Profilgummi.
Série aérospatiale - Colliers, boucle en P en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, masses
Le présent document spécifie les caractéristiques requises pour les colliers à boucle en P, en acier résistant à la corrosion, passivés avec différents matériaux pour les profilés (garnitures).
Ces colliers sont utilisés pour maintenir les tuyauteries et les faisceaux de câbles électriques à usage aérospatial.
Pour les plages de températures et les conditions environnementales, voir les normes des différents matériaux pour les profilés
Aeronavtika - Objemke v obliki zanke (P-oblika) iz korozijsko odpornega jekla, pasivirane, z zaščitno prevleko iz gume - Mere, mase
Ta dokument določa zahtevane značilnosti objemk v obliki zanke (P-oblika) iz korozijsko odpornega jekla, pasiviranega s prevlekami iz različnih materialov.
Te objemke se uporabljajo za podporo aeronavtičnih cevnih sklopov in snopov električnih kablov.
Za temperaturno območje in okoljske vidike glej standarde o prevlekah iz različnih materialov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2024
Aeronavtika - Objemke v obliki zanke (P-oblika) iz korozijsko odpornega jekla,
pasivirane, z zaščitno prevleko iz gume - Mere, mase
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with
rubber cushioning - Dimensions, masses
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem
Stahl, passiviert mit Profilgummi - Maße, Massen
Série aérospatiale - Colliers, boucle en P en acier résistant à la corrosion, passivés avec
profilé en élastomère - Dimensions, masses
Ta slovenski standard je istoveten z: EN 4113:2023
ICS:
49.030.99 Drugi vezni elementi Other fasteners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 4113
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 4113:2009
English Version
Aerospace series - Clamps, loop ("P" type) in corrosion
resisting steel, passivated with rubber cushioning -
Dimensions, masses
Série aérospatiale - Colliers, boucle en P en acier Luft- und Raumfahrt - Schellen in Schlaufenform (P-
résistant à la corrosion, passivés avec profilé en Form) aus korrosionsbeständigem Stahl, passiviert mit
élastomère - Dimensions, masses Profilgummi - Maße, Massen
This European Standard was approved by CEN on 15 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4113:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Materials . 5
4.2 Surface treatment . 5
4.3 Configuration – Dimensions – Masses . 5
5 Designation . 10
6 Marking . 10
7 Technical specification . 10
European foreword
This document (EN 4113:2023) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2024.
This document supersedes EN 4113:2009.
— normative references were updated;
— abbreviation “FPM” was changed to “FKM” throughout the document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom
1 Scope
This document specifies the required characteristics of loop style clamps (“P” type) in corrosion resisting
steel, passivated with various cushion materials.
These clamps are used for supporting aero
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.