iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 1749:2014

(Main)

European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

This Technical Report gives details of a general scheme for the classification of gas appliances according to the method of supplying combustion air and of evacuating the products of combustion. This scheme refers to gas appliances that are intended to be installed within buildings and/or to gas appliances intended ) for installation in a partially protected place external to a building.
This Technical Report is a guide for the harmonization of product standards and for the common understanding of the types of gas appliances.
This TR is not intended to be used as an installation standard or as a product standard, nor as a reference for market surveillance.

Europäischer Leitfaden für die Klassifizierung von Gasgeräten nach der Art der Abgasabführung (Arten)

Modèle européen pour la classification des appareils utilisant les combustibles gazeux selon le mode d'évacuation des produits de combustion (types)

Evropska shema za razvrščanje plinskih aparatov glede na način odvajanja produktov zgorevanja (tipi)

Standard CEN/TR 1749 navaja podrobnosti splošne sheme za razvrščanje plinskih aparatov glede na način dovajanja zraka za zgorevanje in odvajanja produktov zgorevanja. Ta shema se nanaša na plinske aparate, ki so namenjeni vgradnji v stavbe, in/ali na plinske aparate, namenjene vgradnji v delno zaščiten prostor zunaj stavbe. To tehnično poročilo je vodilo za harmonizacijo standardov za proizvode in za splošno razumevanje tipov plinskih aparatov. To tehnično poročilo ni namenjeno uporabi kot standard za vgradnjo ali standard za proizvod ali kot sklicevanje za nadzor trga.

General Information

Status
Withdrawn
Publication Date
24-Jun-2014
Withdrawal Date
07-Jan-2020
ICS
91.140.40 - Gas supply systems
Technical Committee
CEN/TC 238 - Test gases, test pressures and categories of appliances
Drafting Committee
CEN/TC 238 - Test gases, test pressures and categories of appliances
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
08-Jan-2020
Ref Project
SIST-TP CEN/TR 1749:2014 - European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

Relations

Replaces
CEN/TR 1749:2009 - European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
Effective Date
25-Dec-2013
Replaced By
EN 1749:2020 - Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
Effective Date
15-Jan-2020

Buy Standard

kTP FprCEN/TR 1749:2014kTP FprCEN/TR 1749:2014
PreviousNext
Technical report
kTP FprCEN/TR 1749:2014
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
TP CEN/TR 1749:2014TP CEN/TR 1749:2014
PreviousNext
Technical report
TP CEN/TR 1749:2014
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 1749:2014
01-maj-2014
(YURSVNDVKHPD]DUD]YUãþDQMHSOLQVNLKDSDUDWRYJOHGHQDQDþLQRGYDMDQMD
SURGXNWRY]JRUHYDQMD WLSL
European scheme for the classification of gas appliances according to the method of
evacuation of the combustion products (types)
Ta slovenski standard je istoveten z: FprCEN/TR 1749
ICS:
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
kSIST-TP FprCEN/TR 1749:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST-TP FprCEN/TR 1749:2014

---------------------- Page: 2 ----------------------

kSIST-TP FprCEN/TR 1749:2014

TECHNICAL REPORT
FINAL DRAFT
FprCEN/TR 1749
RAPPORT TECHNIQUE

TECHNISCHER BERICHT

February 2014
ICS 91.140.40 Will supersede CEN/TR 1749:2009
English Version
European scheme for the classification of gas appliances
according to the method of evacuation of the combustion
products (types)



This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/SS H99.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 1749:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST-TP FprCEN/TR 1749:2014
FprCEN/TR 1749:2014 (E)
Contents Page
Foreword . 3
1 Scope . 5
2 General scheme . 5
2.1 General . 5
2.2 Type A . 5
2.3 Type B . 5
2.4 Type C . 7
3 Supplementary classification scheme for type A and type B appliances fitted with
particular safety devices . 11
4 Supplementary classification scheme for type B appliances for use in limited installation
conditions . 11
4.1 Type B appliance utilizing a third subscript “D” . 11
4.2 Type B appliances utilizing a third subscript “P” . 11
4.2.1 General . 11
4.2.2 Type B appliances without draught diverters . 11
4.2.3 Type B appliances with draught diverters . 12
5 Supplementary classification scheme for type C appliances for use in limited installation
conditions — Type C appliances utilizing a third subscript “R” . 12
1
Annex A (normative)
...

SLOVENSKI STANDARD
SIST-TP CEN/TR 1749:2014
01-september-2014
1DGRPHãþD
SIST-TP CEN/TR 1749:2010
(YURSVNDVKHPD]DUD]YUãþDQMHSOLQVNLKDSDUDWRYJOHGHQDQDþLQRGYDMDQMD
SURGXNWRY]JRUHYDQMD WLSL
European scheme for the classification of gas appliances according to the method of
evacuation of the combustion products (types)
Ta slovenski standard je istoveten z: CEN/TR 1749:2014
ICS:
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST-TP CEN/TR 1749:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 1749:2014

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 1749:2014

TECHNICAL REPORT
CEN/TR 1749

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
June 2014
ICS 91.140.40 Supersedes CEN/TR 1749:2009
English Version
European scheme for the classification of gas appliances
according to the method of evacuation of the combustion
products (types)



This Technical Report was approved by CEN on 3 July 2014. It has been drawn up by the Technical Committee CEN/SS H99.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 1749:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 1749:2014
CEN/TR 1749:2014 (E)
Contents Page
Foreword . 3
1 Scope . 5
2 General scheme . 5
2.1 General . 5
2.2 Type A . 5
2.3 Type B . 5
2.4 Type C . 7
3 Supplementary classification scheme for type A and type B appliances fitted with
particular safety devices . 11
4 Supplementary classification scheme for type B appliances for use in limited installation
conditions . 11
)
4.1 Type B appliance utilizing a third subscript “D” . 11
)
4.2 Type B appliances utilizing a third subscript “P” . 11
4.2.1 General . 11
4.2.2 Type B appliances without draught diverters . 11
4.2.3 Type B appliances with draught diverters . 12
5 Supplementary classification scheme for type C appliances for use in limited installation
appliances utilizing a third subscript “R” . 12
conditions — Type C
1
Annex A (normative) Classification according to the mode of evacuation of the products of

combustion . 13
Annex B (normative) Special national applianc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 437:2021(Main)
Test gases - Test pressures - Appliance categories
SIST EN 437:2021

This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families. It serves as a reference document in the specific standards for appliances.
The document makes recommendations for the use of the gases and pressures to be applied for the tests of appliances burning gaseous fuels.
NOTE   Procedures for tests are given in the corresponding appliance standards. The test gases and the test pressures specified in this standard are in principle intended to be used with all types of appliances.
However, the use of some test gases and test pressures may not be appropriate in the following cases:
-   appliances with nominal heat input greater than 300 kW;
-   appliances constructed on site;
-   appliances in which the final design is influenced by the user;
-   appliances constructed for use with high supply pressures (notably direct use of the saturated vapour pressure).
In these cases, the specific appliance standards may specify other test conditions in order to establish compliance with their requirements.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1749:2020(Main)
Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
SIST EN 1749:2020

This document gives details for the classification of gas appliances according to the method of supplying combustion air and of evacuating the combustion products (types). This classification refers to gas appliances that are intended to be installed within buildings and/or outside of the building .
The document classifies appliances as type A, B or C according to the basic principle for the evacuation of the combustion products and air inlet.
This document is the reference for the harmonization of product standards, for the preparation of installation standards and for the common understanding of the types of gas appliances.
This document is neither an installation standard nor a product standard.
In references to a gas appliance or gas appliances connected via "its" or "their" duct or ducts, it is intended that the air inlet duct and/or the discharge duct for carrying any combustion products are part of the gas appliance. This means that such ducts are certified together with the gas appliance. Informative Annex C identifies appliance types that are designed for connection to separate chimney products, which may be part of the construction of the building.
In terms of this document, a "single duct" is a flue duct designed and capable of discharging the combustion products and/or air inlet duct for the air supply for only one appliance.
In terms of this document, a "common duct" is a flue duct designed and capable of discharging the combustion products and/or air inlet duct for the air supply for more than one appliance.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 437:2003/prA1(Amendment)
Test gases - Test pressures - Appliance categories
SIST EN 437:2005/kprA1:2008

This standard specifies the test gases, test pressures and categories of appliances relative to use of combustible gases of the first, second and third families. It serves as a reference document in the specific standards for appliances that fall within the scope of the Council Directive on the approximation of the laws of Member States concerning gas appliances.
The standard makes recommendations for the use of the gases and pressures to be applied for the tests. The full procedure will be given the corresponding appliance standards.
NOTE The test gases and the test pressures specified in this standard are in principle intended to be used with all the appliances in order to establish conformity with the corresponding standards.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12261:2024(Main)
Gas meters - Turbine gas meters
kSIST FprEN 12261:2023

This document specifies the measuring conditions, requirements and tests for the construction, performance and safety of class 1,0 axial and radial turbine gas meters with mechanical indicating devices, hereinafter referred to as a meter(s), having in-line pipe connections for gas flow measurement.
This document applies to turbine gas meters used to measure the volume of fuel gases of the 1st and 2nd gas families, the composition of which is specified in EN 437:2021, at maximum working pressures up to 420 bar, actual flow rates up to 25 000 m3/h over a gas temperature range of at least 40 K and for a climatic environmental temperature range of at least 50 K.
This document applies to meters that are installed in locations with vibration and shocks of low significance and in:
-   closed locations (indoor or outdoor with protection as specified by the manufacturer) with condensing or with non-condensing humidity;
or, if specified by the manufacturer,
-   open locations (outdoor without any covering) with condensing humidity or with non-condensing humidity;
and in locations with electromagnetic disturbances.
Unless otherwise specified in this document:
-   all pressures used are gauge;
-   all influence quantities, except the one under test, are kept relatively constant at their reference value.
Clauses 1 to 7 and Annex B are for design and type testing only, with the exception of 6.2.4.3, 6.2.5.3, 6.7.1.2.2 and 6.7.2.2.2. Annex C can be used to provide guidance on periodic tests during use. Clause 8 and Annexes D and E are for each meter prior to dispatch. Annex A is intended to be used for both type and individual testing. Annex F is intended to be used for individual testing. Annex G is intended to be used for design.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16395:2023(Main)
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
SIST-TP CEN/TR 16395:2024

This Technical Report gives explanation on the pressure definitions and pressure units used by the gas network operators with regard to the standards of CEN/TC 234 “Gas infrastructure” listed in Clause 2.
The European Standards of CEN/TC 234 comprise the functional requirements in the field of gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances, including transmission, distribution, storage, compression, pressure regulation and metering, installation, injection of (renewable) gases such as biomethane, hydrogen, gas quality issues and others.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15001-2:2023(Main)
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
SIST EN 15001-2:2023

This European Standard specifies detailed functional requirements for the commissioning, operation and maintenance of
-   industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of
-   non-industrial gas installations (residential and commercial) with an operating pressure greater than 5 bar,
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This European Standard also covers the pipework to the inlet connection of a gas appliance that is not included within the scope of the appliance standard.
NOTE   The use of the term installation and pipework is interchangeable.
Apart from the exceptions stated below, this standard applies to gas installations operating at ambient temperatures between -20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this European Standard applies.
In this European Standard, the term "gas" refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases as classified in Table 1 of EN 437:2003+A1:2009. The given values are considered as normal conditions for all volumes given in this standard.
This European Standard is applicable to installation pipework for the carriage of:
-   processed, non-toxic and non-corrosive natural gas according to EN 437:2003+A1:2009 and EN 16726 -Gas infrastructure - Quality of gas - Group H”,
-   vaporized LNG,
-   biomethane, complying with EN 16723-1,
-   vaporized LNG.
NOTE   The specification of vaporized LNG is equal to that of natural gas as classified in EN 437:2003+A1:2009.
This European Standard does not cover pipework for hydrogen rich gases that fall outside the definitions within EN 437:2003+A1:2009. LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure (e.g. between the storage vessel and its pressure regulator).
In this European Standard, all pressures are gauge pressures unless otherwise stated.
This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or code of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
For gas installations within the scope of this standard, national legislation and regulations have to be taken into account.
Functional requirements for design, selection of materials, construction, inspection and testing of industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of gas installations greater than 5 bar in buildings and areas intended for residential, commercial, public and mixed uses are described in EN 15001-1.
Generally, additional safety precautions may be necessary where non odorized gas is used. For non-industrial purposes, the gas should be odorized.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15001-1:2023(Main)
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
SIST EN 15001-1:2023

This European Standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of:
-   industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar; and
-   non-industrial gas installation pipework (residential and commercial) with an operating pressure greater than 5 bar in buildings;
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the pipework to the inlet connection of a gas appliance that is not included within the scope of the appliance standard.
NOTE 1   The use of the term installation and pipework is interchangeable.
Apart from the exceptions stated below, this standard applies to gas installations operating at ambient temperatures between −20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 (all parts) for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar in buildings, EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard applies.
In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases as classified in EN 437:2003+A1:2009, Table 1. The given values are considered as normal conditions for all volumes given in this standard.
This European Standard is applicable to installation pipework for the carriage of:
-   processed, non-toxic and non-corrosive natural gas according to EN 437:2003+A1:2009 and EN 16726 "Gas infrastructure - Quality of gas - Group H";
-   vaporized LPG;
-   biomethane, complying with EN 16723 1;
-   vaporized LNG.
NOTE 2   The specification of vaporized LNG is equal to that of natural gas as classified in EN 437:2003+A1:2009.
This European Standard does not cover pipework for hydrogen rich gases that fall outside the definitions within EN 437:2003+A1:2009.
LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure in the liquid state (e.g. between the storage vessel and any pressure regulator).
In this standard, all pressures are gauge pressures unless otherwise stated.
This standard has been harmonized to address the essential safety requirements of the Pressure Equipment Directive (PED, 2014/68/EU [formerly 97/23/EC]) relevant for the joining of gas installation pipework (assemblies) falling within the scope of the PED. These are listed in Annex ZA. However, "this Directive does not cover the assembly of pressure equipment on the site and under the responsibility of the user, as in the case of industrial installations" (PED, Preamble, 7th recital, last paragraph).
Although in this respect, the standard takes into account the essential safety requirements of the PED, no inference can be drawn from this as to whether or not the installation or parts of the installation falls within the scope of the PED. Reference should therefore be made to the PED and relevant national legislation.
This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware (...)

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16830:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
SIST EN 16830:2022

This document specifies the safety, design, construction, performance requirements and testing of Temperature Control Functions (TCF) and Combustion Product Discharge Safety Devices (TTB) for gas and liquid fuel burners and appliances burning one or more gaseous or liquid fuels, hereafter referred to as ‘TCF’ or ‘TTB’.
It also describes the test procedures for checking compliance with these requirements.
This document is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks, see Annex I).
This document is applicable to electronically based TTB and TCF only.
For both TTB and TCF, the requirements in this document are applicable to the combination of sensing element and control.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17526:2021(Main)
Gas meter - Thermal-mass flow-meter based gas meter
SIST EN 17526:2022

This document specifies requirements and tests for the construction, performance, safety and production of battery powered class 1,5 Capillary Thermal-Mass Flow sensor gas meters (hereinafter referred to as meter(s)). This applies to meters having co-axial single pipe, or two pipe connections, which are used to measure volumes of fuel gases of the 2nd and/or 3rd family, as given in EN 437:2018.
In general, the term “thermal mass flow meters” applies to a flow-measuring device using heat transfer to measure and indicate gas flowrate, as defined in ISO 14511.
NOTE 1   Although the word “mass” is present in the definition of the measurement principle, gas meters covered by this document provide measurement of gas at base conditions of temperature and pressure.
These meters have a maximum working pressure not exceeding 0,5 bar and a maximum flowrate not exceeding 160 m3/h over a minimum ambient temperature range of −10 °C to +40 °C and a gas temperature range as specified by the manufacturer with a minimum range of 40 °C.
This document applies to meters indicating volume at base conditions, which are installed in locations with vibration and shocks of low significance. It applies to meters in:
-   closed locations (indoor or outdoor with protection, as specified by the manufacturer) with condensing humidity or with non-condensing humidity;
or, if specified by the manufacturer:
-   open locations (outdoor without any covering) both with condensing humidity or with non-condensing humidity;
and in locations with electromagnetic disturbances likely to be found in residential, commercial and light industrial use.
For meters which indicate unconverted volume, reference can be made to Annex C.
Unless otherwise stated, all pressures given in this document are gauge pressures.
Requirements for electronic indexes, valves and additional requirements for batteries incorporated in the meter and any other additional functionalities are given in EN 16314:2013.
Unless otherwise stated in a particular test, the tests are carried out on meters that include additional functionality devices intended by the manufacturer.
Clauses 1 to 13 are for design and type testing only.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 1555-7:2021(Main)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
SIST-TS CEN/TS 1555-7:2022

This document gives guidance for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of EN 1555 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
This document gives recommendations that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001.
NOTE 1 If certification is involved, the certification and inspection body is preferably compliant with EN ISO/IEC 17065, EN IS0/IEC 17021 or EN ISO/IEC 17020, as applicable.
In conjunction with Parts 1 to 5 of EN 1555 (see Foreword), this document is applicable to polyethylene (PE) plastics piping systems for the supply of gaseous fuels. It is applicable to PE pipes, fittings, and valves, their joints and to joints with components of other materials intended to be used under the following conditions:
a) a maximum operating pressure, MOP, up to and including 10 bar;
b) an operating temperature of 20 °C as reference temperature.
NOTE 2 For other operating temperatures, derating coefficients can be used; see EN 1555-5.

  • Technical specification
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day