EN 1034-4:2005

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

This European Standard applies to pulpers and their loading facilities intended for use in paper making and
shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and
hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the
conditions foreseen by the manufacturer (see clause 4).
This European Standard is not applicable to pulpers and their loading facilities that have been manufactured
before the date of publication of this standard.

Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 4: Stofflöser und deren Beschickungseinrichtungen

Diese Europäische Norm gilt für Stofflöser und deren Beschickungseinrichtungen, die zur Verwendung bei der Papierherstellung bestimmt sind, und muss in Verbindung mit EN 1034-1:2000 angewendet werden. Sie behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Stofflöser und deren Beschickungseinrichtungen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden (siehe Abschnitt 4).
Diese Europäische Norm gilt nicht für Stofflöser und deren Beschickungseinrichtungen, die hergestellt wurden, bevor CEN diese Norm veröffentlichte.

Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 4: Triturateurs et leurs dispositifs d'alimentation

La présente Norme européenne s’applique aux triturateurs et à leurs systèmes d’alimentation destinés à la
fabrication du papier et doit être utilisée conjointement avec l’EN 1034-1:2000. Elle traite tous les
phénomènes dangereux significatifs, les situations et les événements dangereux engendrés par les
triturateurs et leurs systèmes d’alimentation lorsqu’ils sont utilisés normalement et dans les conditions
prévues par le constructeur (voir Article 4).
La présente Norme européenne n’est pas applicable aux triturateurs et à leurs systèmes d’alimentation qui
ont été fabriqués avant la date de publication de cette norme par le CEN.

Varnost strojev – Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja – 4. del: Razpuščevalniki in pripadajoče naprave za polnjenje

General Information

• Status: Withdrawn
• Publication Date: 22-Nov-2005
• Withdrawal Date: 01-Dec-2009
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 2 - Paper Machinery
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Dec-2009
• Completion Date: 02-Dec-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 1034-4:2006 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

Relations

• Merged Into: EN 1034-4:2005+A1:2009 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
• Effective Date: 24-Oct-2009
• Parent: EN 1034-1:2000 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SROQMHQMHSicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 4: Stofflöser und deren BeschickungseinrichtungenSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 4: Triturateurs et leurs dispositifs d'alimentationSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-4:2005SIST EN 1034-4:2006en01-julij-2006SIST EN 1034-4:2006SLOVENSKI
STANDARD



SIST EN 1034-4:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1034-4November 2005ICS 85.100 English VersionSafety of machinery - Safety requirements for the design andconstruction of paper making and finishing machines - Part 4:Pulpers and their loading facilitiesSécurité des machines - Prescriptions de sécurité pour laconception et la construction de machines de fabrication etde finition du papier - Partie 4: Triturateurs et leursdispositifs d'alimentationSicherheit von Maschinen - SicherheitstechnischeAnforderungen an Konstruktion und Bau von Maschinender Papierherstellung und Ausrüstung - Teil 4: Stofflöserund deren BeschickungseinrichtungenThis European Standard was approved by CEN on 20 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1034-4:2005: ESIST EN 1034-4:2006



EN 1034-4:2005 (E) 2 Contents Page Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.6 4 List of significant hazards.7 5 Safety requirements and/or measures.8 5.1 General.8 5.2 Requirements for safety devices.8 5.3 Power transmission elements.9 5.4 Workplaces, access stairs, catwalks, passageways.9 5.5 Falling hazard on pulpers.9 5.6 Loading facilities on pulpers.12 5.7 Start-up warning devices.13 5.8 Emergency stop devices.13
...