iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 80369-5:2016/AC:2021-06

(Corrigendum)

Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications

Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications

2021-06-25 - IEC Corrected version

Verbindungsstücke mit kleinem Durchmesser für Flüssigkeiten und Gase in medizinischen Anwendungen - Teil 5: Verbindungsstücke für Anwendungen mit aufblasbaren Manschettensystemen für Gliedmaßen

Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé - Partie 5: Raccords destinés à des applications au gonflage de brassard

Priključki z majhnim premerom za tekočine in pline za uporabo v zdravstvu - 5. del: Priključki z raztegljivo manšeto za okončine - Popravek AC

General Information

Status
Published
Publication Date
24-Jun-2021
ICS
11.040.20 - Transfusion, infusion and injection equipment
Technical Committee
CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices
Drafting Committee
CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Jun-2021
Completion Date
25-Jun-2021
Directive
2017/745 - Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC) No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
M/575 - Medical devices in support of Regulation (EU) 2017/745 and in vitro diagnostic medical devices in support of Regulation (EU) 2017/746
M/575 AMD 2 - Medical devices in support of Regulation (EU) 2017/745 and in vitro diagnostic medicial devices in support of Regulation (EU) 2017746
Ref Project
SIST EN 80369-5:2017/AC:2022 - Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications

Relations

Corrects
EN 80369-5:2016 - Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications
Effective Date
02-Jun-2021
EN 80369-5:2017/AC:2022EN 80369-5:2017/AC:2022
PreviousNext
Corrigendum
EN 80369-5:2017/AC:2022
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2022
Priključki z majhnim premerom za tekočine in pline za uporabo v zdravstvu - 5. del:
Priključki z raztegljivo manšeto za okončine - Popravek AC
Small-bore connectors for liquids and gases in healthcare applications - Part 5:
Connectors for limb cuff inflation applications
Verbindungsstücke mit kleinem Durchmesser für Flüssigkeiten und Gase in
medizinischen Anwendungen - Teil 5: Verbindungsstücke für Anwendungen mit
aufblasbaren Manschettensystemen für Gliedmaßen
Raccords de petite taille pour liquides et gaz utilisés dans le domaine de la santé - Partie
5: Raccords destinés à des applications au gonflage de brassard
Ta slovenski standard je istoveten z: EN 80369-5:2016/AC:2021-06
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 80369-5:2016/AC:2021-06

NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 11.040.20
English Version
Small-bore connectors for liquids and gases in healthcare
applications - Part 5: Connectors for limb cuff inflation
applications
(IEC 80369-5:2016/COR2:2021)
Raccords de petite taille pour liquides et gaz utilisés dans le Verbindungsstücke mit kleinem Durchmesser für
domaine de la santé - Partie 5: Raccords destinés à des
Flüssigkeiten und Gase in medizinischen Anwendungen -
applications au gonflage de brassard Teil 5: Verbindungsstücke für Anwendungen mit
(IEC 80369-5:2016/COR2:2021) aufblasbaren Manschettensystemen für Gliedmaßen
(IEC 80369-5:2016/COR2:2021)
This co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CEN
EN ISO 80369-20:2024(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369‑20:2024)
SIST EN ISO 80369-20:2025

NOTE            Clause A.2 contains guidance or rationale for this clause.
This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80369-2:2024(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications (ISO 80369-2:2024, Corrected version 2025-06)
SIST EN ISO 80369-2:2024

This document specifies the design and dimensions for two small-bore connectors intended to be used for connections in respiratory applications of medical devices and accessories. One connector (R1) is intended for use on medical devices and accessories subjected to pressures up to 15 kPa (e.g. a breathing system). The other connector (R2) is intended for use on medical devices and accessories subjected to higher pressures between 15 kPa and 600 kPa (e.g. oxygen therapy tubing).
NOTE 1        The pressure is related to pressure available at the source to which the medical device is connected.
NOTE 2        The intended application does not preclude the use of other connectors on medical devices or accessories within this application.
NOTE 3        Requirements for alternative connectors for this intended application are specified in ISO 80369-1.
This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in device-specific standards.
NOTE 4        If a device-specific standard does not exist, the performance and material requirements specified in ISO 80369-1 can be used as guidance.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80369-1:2018(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2018)
SIST EN ISO 80369-1:2019

This document specifies general requirements for small-bore connectors, which convey liquids or gases in healthcare applications. These small-bore connectors are used in medical devices or accessories intended for use with a patient.
This document also specifies the healthcare fields in which these small-bore connectors are intended to be used.
These healthcare fields include, but are not limited to:
—          breathing systems and driving gases;
—          enteral;
—          limb cuff inflation;
—          neuraxial;
—          intravascular or hypodermic.
This document provides the methodology to assess non-interconnectable characteristics of small-bore connectors based on their inherent design and dimensions in order to reduce the risk of misconnections between medical devices or between accessories for different applications as specified in this document as well as those that will be developed under future parts of the ISO 80369 series.
This document does not specify requirements for the medical devices or accessories that use these small-bore connectors. Such requirements are given in particular International Standards for specific medical devices or accessories.
NOTE 1    Clause 7 allows for additional designs of small-bore connectors for new applications for inclusion in the ISO 80369 series.
NOTE 2    Manufacturers are encouraged to incorporate the small-bore connectors specified in the ISO 80369 series into medical devices, medical systems or accessories, even if currently not required by the relevant particular medical device standards. It is expected that when the relevant particular medical device standards are revised, the risks associated with changing to the new small-bore connectors as specified in the ISO 80369 series of standards will be considered.
NOTE 3    The connectors specified in the ISO 80369 series are intended for use only in their specified application. Use of these connectors for other applications increases risk that a hazardous misconnection could occur.
NOTE 4    Manufacturers and responsible organizations are encouraged to report their experience with the small-bore connectors specified in the ISO 80369 series to the Secretariat of ISO/TC 210 so that this feedback can be considered during the revision of the relevant part of the ISO 80369 series.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 80369-5:2016(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications
SIST EN 80369-5:2017

This part of ISO 80369 specifies requirements for SMALL-BORE CONNECTORS intended to be used for CONNECTIONS in limb cuff inflation APPLICATIONS of MEDICAL DEVICES and ACCESSORIES. Limb cuff inflation APPLICATIONS include CONNECTIONS between a sphygmomanometer [3] [4] 1) and its cuff and CONNECTIONS between inflating equipment and its tourniquet intended for use with a PATIENT.
This part of ISO 80369 does not specify requirements for the MEDICAL DEVICES or ACCESSORIES that use these CONNECTORS. Such requirements are given in particular International Standards for specific MEDICAL DEVICES or ACCESSORIES.
NOTE 1 MANUFACTURERS are encouraged to incorporate the SMALL-BORE CONNECTORS specified in this part of ISO 80369 into MEDICAL DEVICES, medical systems or ACCESSORIES, even if currently not required by the relevant particular device standards. It is expected that when the relevant particular device standards are revised, requirements for SMALL-BORE CONNECTORS, as specified in this part of ISO 80369 will be included.
NOTE 2 The requirements for SMALL-BORE CONNECTORS intended to be used with neonatal PATIENTS to connect a cuff to a sphygmomanometer are intended to be added to this standard by an amendment or new edition.
NOTE 3 The requirements for SMALL-BORE CONNECTORS intended to be used to connect a tourniquet to its inflating equipment are intended to be added to this standard by an amendment or new edition.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 80369-1(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO/FDIS 80369-1:2025)
kSIST FprEN ISO 80369-1:2025

This document specifies general interface requirements for small-bore connectors that form part of a medical device or accessory that conveys liquids or gases to a patient.
This document also identifies the applications for which these small-bore connectors are intended to be used, which include, but are not limited to:
—     respiratory;
—     enteral;
—     limb cuff inflation;
—     neural;
—     intravascular or hypodermic;
—     other use cases utilizing an ISO 80369-7 small-bore connector.
This document provides the methodology to assess non-interconnectable characteristics of small-bore connectors based on their inherent design in order to reduce the risk of misconnections between medical devices or between accessories for different applications as specified in this document as well as those that can be developed under future parts of the ISO and IEC 80369 series.
NOTE            Clause A.2 contains guidance or rationale for this Clause.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1135-5:2025(Main)
Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2025)
SIST EN ISO 1135-5:2026

This document specifies requirements for single use transfusion sets for use with pressure infusion equipment capable of generating pressures. It ensures compatibility with containers for blood and blood components as well as intravenous equipment.
This document also provides guidance on specifications relating to the quality and performance of materials used in transfusion sets, to present designations for transfusion set components, and to ensure the compatibility of sets with red cell and plasma blood components.
NOTE            In some countries, the national pharmacopoeia or other national regulations are legally binding and take precedence over this document.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1135-4:2025(Main)
Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2025)
SIST EN ISO 1135-4:2026

This document specifies requirements for single use transfusion gravity sets for medical use to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment.
It also provides guidance on specifications relating to the quality and performance of materials used in transfusion sets, presents designations for transfusion set components, and ensures the compatibility of sets with a range of cellular and plasma blood components.
NOTE            In some countries, the national pharmacopoeia or other national regulations are legally binding and take precedence over this document.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8536-16:2025(Main)
Infusion equipment for medical use - Part 16: Infusion sets for single use with volumetric infusion controllers (ISO 8536-16:2025)
SIST EN ISO 8536-16:2025

This document specifies the requirements for sterilized, single-use, gravity feed infusion sets, used together with the volumetric infusion controllers of IEC 60601-2-24.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8871-5:2025(Main)
Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO 8871-5:2025)
SIST EN ISO 8871-5:2025

This document specifies requirements and test methods for functional parameters of closures used in combination with vials and when pierced by an injection needle.
NOTE            Functional testing with spikes is specified in ISO 8536-2, ISO 8536-6, ISO 8362-1 and ISO 8362-4.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8536-13:2024(Main)
Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2024)
SIST EN ISO 8536-13:2024

This document specifies requirements for non-sterile, single-use graduated flow regulators used as subcomponents in sterilized infusion sets for single use to control the flow of intravenous infusion solutions with fluid contact under gravity feed conditions.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day