EN 15468:2016
(Main)Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1).
It includes a classification system, based on EN ISO 10874, providing practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. in domestic kitchens. This standard does not specify requirements relating to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.
Laminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen, Anforderungen und Prüfverfahren
Diese Europäische Norm legt Eigenschaften fest, enthält Anforderungen und gibt die Prüfverfahren für Laminatböden an (wie in 3.1 definiert).
Sie enthält ein Klassifizierungssystem, das auf EN ISO 10874 basiert, mit praktischen Anforderungen für bestimmte Verwendungsbereiche und Beanspruchungsklassen. Dies dient dazu aufzuzeigen, in welchen Bereichen Laminatböden zufriedenstellend eingesetzt werden können, sowie dazu, den Verbraucher in die Lage zu versetzen, informiert eine Auswahl zu treffen. Sie legt ebenfalls Anforderungen an Kennzeichnung und Verpackung fest.
Für Laminatböden werden die Anwendungsgebiete „Wohnen“ und „Gewerblich“ berücksichtigt, z. B. für die Verwendung in Küchen im Wohnbereich. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen.
Revêtements de sol stratifiés - Éléments comportant une couche d'impression appliquée directement et une couche de surface à base de résine - Spécifications, exigences et méthodes d'essai
La présente Norme européenne spécifie les caractéristiques, fixe les exigences et indique les méthodes d’essai pour les revêtements de sol stratifiés (tels que définis en 3.1).
Elle comporte un système de classification fondé sur l’EN ISO 10874, qui donne les exigences pratiques relatives aux zones et niveaux d’utilisation, afin d’indiquer les cas où les revêtements de sol stratifiés peuvent être utilisés de manière satisfaisante et favoriser ainsi un choix avisé du consommateur. Elle spécifie également les exigences relatives au marquage et à l’emballage.
Les revêtements de sol stratifiés sont destinés à des usages domestiques et commerciaux, par exemple dans les cuisines domestiques. La présente norme ne spécifie pas les exigences relatives aux zones présentant un risque d’humidification fréquente comme les salles de bains, les buanderies ou les saunas.
Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne smole - Specifikacije, zahteve in preskusne metode
Ta evropski standard določa lastnosti, zahteve in preskusne metode za laminatne talne obloge (kot je določeno v točki 3.1).
Vključuje sistem razvrščanja na podlagi standarda EN ISO 10874 ter podaja praktične zahteve za območja in ravni uporabe z namenom opredelitve področij zadovoljive uporabe laminatnih talnih oblog ter spodbude potrošnikov k sprejemanju utemeljenih odločitev. Določa tudi zahteve za označevanje in pakiranje.
Laminatne talne obloge so primerne za gospodinjsko in komercialno uporabo, npr. v kuhinjah v gospodinjstvih. Ta standard ne določa zahtev v zvezi z območji, ki se lahko zmočijo (npr. kopalnice, pralnice ali savne).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laminatne talne obloge - Elementi z direktnim nanosom potiska in sloja iz umetne smole - Specifikacije, zahteve in preskusne metodeLaminatböden - Direktbedruckte Elemente mit Kunstharz-Deckschicht - Spezifikationen, Anforderungen und PrüfverfahrenRevêtements de sol stratifiés - Eléments comportant une couche d'impression appliquée directement et une couche de surface à base de résine - Spécifications, exigences et méthodes d'essaiLaminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 15468:2016SIST EN 15468:2016en,fr,de01-maj-2016SIST EN 15468:2016SLOVENSKI
STANDARDSIST EN 15468:20081DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15468
March
t r s x ICS
{ yä s w r Supersedes EN
s w v x zã t r r yEnglish Version
Laminate floor coverings æ Elements with directly applied printing and resin surface layer æ Specificationsá requirements and test methods Revêtements de sol stratifiés æ Éléments comportant une couche d 5impression appliquée directement et une couche de surface à base de résine æ Spécificationsá exigences et méthodes d 5essai
Laminatböden æ Direktbedruckte Elemente mit KunstharzæDeckschicht æ Spezifikationená Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t y November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w v x zã t r s x ESIST EN 15468:2016
Determination of abrasion resistance . 10 A.1 General . 10 A.2 Sampling . 10 A.3 Conditioning . 11 A.4 Apparatus . 11 A.5 Procedure. 16 A.5.1 General . 16 A.5.2 Maintenance of the abrading wheels . 17 A.5.3 Operation of the abrader . 17 A.5.4 Calibration . 17 A.5.5 Abrasion of test specimen . 18 A.6 Expression of results . 19 A.7 Test report . 19 Bibliography . 20
· 800 kg/m3. 3.4 backer layer opposite to the surface layer used to balance and stabilize the product Note 1 to entry: The backer is generally made of impregnated papers 3.5 underlay layer placed between the laminate floor covering and the subfloor to impart specific properties Note 1 to entry: Some laminate floor covering products have the underlay pre-attached directly to the backer. 3.6 laminate floor covering element piece of the floor covering with profiled edges to facilitate assembly at installation Note 1 to entry: See Figure 1. SIST EN 15468:2016
Key 1 surface layer 2 substrate 3 backer 4 underlay (optional) Figure 1— Laminate floor-covering element 4 Requirements 4.1 General requirements Laminate floor coverings according to this standard shall conform to the general requirements given in EN 13329:2016 when tested by the methods given therein. For special applications, such as decorative pattern effects, tighter tolerances might be required. The tolerances of the tongue and groove shall be such that when, for testing, the elements are assembled without glue, the maximum permissible opening and height difference values are not exceeded. To determine the capability of laminate floor coverings to withstand ambient humidity variations, a laboratory test in controlled conditions shall be made. 4.2 Classification requirements Laminate floor coverings using the PDL technologies, according to this standard, shall be classified as suitable for different levels of use according to the classification requirements specified in Table 1, when tested by the methods given therein. Classification shall conform to the scheme specified in EN ISO 10874. For the big ball impact test a standard EPS foam of (1,8 ± 0,2) mm thickness, with a CS value of (60 ± 10) kPa and with PC-value of (0,9 ± 0,1) mm shall be used. The three parameters
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.