High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater

This European Standard applies to Exterior-grade Compact laminates of thickness 2 mm and greater produced by using a high pressure process. It specifies requirements for standard and flame-retardant laminates intended for use under outdoor weather conditions such as direct sunlight rain and frost. Two levels of performance are specified; one for moderate exterior conditions, and the other for severe exterior conditions.
Laminates complying with this European Standard are referred to as Exterior-grade Compact laminates, and are characterized by their high tensile strength, high impact resistance, thermal shock resistance, and resistance to weather and corrosion. They are available in a variety of decorative colours, with high resistance to colour change and aging in outdoor applications. When they are self-supporting Exterior-grade Compact laminates are ready for installation, and only require cutting to size, drilling, etc. to suit the application. EN 438-2 specifies the methods of test relevant to this part of EN 438.

Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 6: Klassifizierung und Spezifikationen für Kompakt-Schichtpressstoffe für die Anwendung im Freien mit einer Dicke von 2 mm und größer

Diese Europäische Norm gilt für Kompakt Schichtpressstoffe für die Anwendung im Freien mit einer Dicke von 2 mm und größer, die mit einem Hochdruckverfahren hergestellt wurden. Die Norm legt die An¬for¬de-rungen an Standardqualität und flammenhemmende Schichtpressstoffe zur Anwendung unter Witterungs-bedingungen im Freien, wie direktes Sonnenlicht, Regen und Frost, fest. Zwei Leistungsqualitäten wer¬den festgelegt; eine für mäßige Beanspruchungen und die andere für starke Beanspruchungen im Außenbereich.
Schicht¬pressstoffe, die dieser Europäischen Norm entsprechen, werden als Außen-Kompakt-Schicht¬press-stoffe (en: Exterior Grade Compact Laminates) bezeichnet und sind charakterisiert durch hohe Zug-festigkeit, hohe Sto߬festigkeit, Beständigkeit gegen schnelle Temperaturwechsel und die Beständigkeit gegen Witterung und Korrosion. Sie sind in einer Vielzahl dekorativer Farben mit einer hohen Beständigkeit gegen Farb¬ver¬änderungen und Alterung bei Anwendungen im Freien erhältlich. Selbsttragende Außen-Kompakt-Schicht¬press¬¬stoffe sind verlegefertig vorgerichtet, so dass es bei der vorgesehenen Anwendung nur erforderlich ist, sie zu¬zu¬schneiden, zu bohren usw. Die für diesen Teil von EN 438 zutreffenden Prüf¬ver¬fahren sind in EN 438-2 festgelegt.

Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 6: Classification et spécifications des stratifiés compacts pour usage en extérieur d'épaisseur égale ou supérieure à 2 mm

La présente Norme européenne s’applique stratifiés compacts pour usage en extérieur d’épaisseur égale ou supérieure à 2 mm produits en utilisant un procédé haute pression. Elle spécifie les exigences pour les stratifiés standard et avec retardateurs de flamme destinés à être exposés à des conditions atmosphériques extérieures tels que le rayonnement solaire direct, la pluie et le gel. Deux niveaux de performance sont spécifiés, l’un pour les conditions extérieures modérées et l’autre pour des conditions extérieures rigoureuses.
Les stratifiés conformes à la présente Norme européenne sont désignés comme des stratifiés compacts pour usage en extérieur et se caractérisent par leur résistance élevée à la traction leur résistance élevée au choc, leur résistance au choc thermique et leur résistance aux intempéries et à la corrosion. Ils sont disponibles en diverses couleurs décoratives et présentent une résistance élevée à la décoloration et au vieillissement dans les applications à l’extérieur. Lorsqu’ils sont autoporteurs, les stratifiés compacts pour usage en extérieur sont prêts à être mis en oeuvre et n’ont plus qu’à être découpés, percés, etc., en fonction de leur utilisation. L’EN 438-2 spécifie les méthodes d’essai correspondant à la présente partie de l’EN 438.

Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 6. del: Razvrstitev in specifikacije za 2 mm in več debele laminate za zunanjo uporabo

Ta del standarda EN 438 se uporablja za kompaktne laminate za zunanjo uporabo z debelino vsaj 2 mm, ki so izdelani z visokotlačnim postopkom. Določa zahteve za standardne in negorljive laminate, namenjene za uporabo pri zunanjih vremenskih pogojih, kot je neposredna sončna svetloba, dež ali zmrzal. Določeni sta dve ravni učinkovitosti: prva za zmerne zunanje pogoje in druga za izredne zunanje pogoje. Laminati v skladu s tem delom standarda EN 438 se imenujejo kompaktni laminati za zunanjo uporabo, zanje pa so značilni izredna natezna trdnost, izredna odpornost proti udarcem, odpornost na toplotne udare ter odpornost na vremenske pogoje in korozijo. Na voljo so v številnih dekorativnih barvah z izredno odpornostjo na spremembe barve in obrabo pri uporabi na prostem. Samonosilni kompaktni laminati za zunanjo uporabo so pripravljeni za namestitev in zahtevajo zgolj obrezovanje, vrtanje itd. v skladu z načinom uporabe. EN 438-2 določa preskusne metode, ustrezne za ta del standarda EN 438.

General Information

Status
Published
Publication Date
16-Feb-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Sep-2021

RELATIONS

Buy Standard

Standard
EN 438-6:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XSRUDERDekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 6: Klassifizierung und Spezifikationen für Kompakt-Schichtpressstoffe für die Anwendung im Freien mit einer Dicke von 2 mm und größerStratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 6: Classification et spécifications des stratifiés compacts pour usage en extérieur d'épaisseur égale ou supérieure à 2 mmHigh-pressure decorative (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater83.140.20Laminated sheetsICS:Ta slovenski standard je istoveten z:EN 438-6:2016SIST EN 438-6:2016en,fr,de01-april-2016SIST EN 438-6:2016SLOVENSKI

STANDARDSIST EN 438-6:20051DGRPHãþD
SIST EN 438-6:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 438-6
February
t r s x ICS
z uä s v rä t r Supersedes EN
v u zæ xã t r r wEnglish Version

Classification and specifications for Exteriorægrade compact laminates of thickness

t mm and greater spßcifications des stratifißs compacts pour usage en extßrieur d 5ßpaisseur ßgale ou supßrieure à

t mm æ Teil

xã Klassifizierung und Spezifikationen für KompaktæSchichtpressstoffe für die Anwendung im Freien mit einer Dicke von

t mm und größer This European Standard was approved by CEN on
s u December
t r s wä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

v u zæ xã t r s x ESIST EN 438-6:2016
EN 438-6:2016 (E) 2 Contents

Page European foreword ....................................................................................................................................................... 3 1 Scope ........................................................................................................................................................................... 4 2 Normative references ........................................................................................................................................... 4 3 Terms, definitions, symbols and abbreviations .......................................................................................... 4 3.1 Terms and definitions .................................................................................................................................................... 4 3.2 Symbols ................................................................................................................................................................................ 5 4 Material types and classification system ....................................................................................................... 5 5 Requirements .......................................................................................................................................................... 5 5.1 Compliance ......................................................................................................................................................................... 5 5.2 Inspection requirements .............................................................................................................................................. 5 5.2.1 General ......................................................................................................................................................................... 5 5.2.2 Colour and pattern .................................................................................................................................................. 6 5.2.3 Surface finish ............................................................................................................................................................. 6 5.2.4 Visual inspection ..................................................................................................................................................... 6 5.3 Dimensional tolerance requirements ...................................................................................................................... 7 5.4 Test requirements ........................................................................................................................................................... 7 5.4.1 Physical property requirements ....................................................................................................................... 7 5.4.2 Weather resistance requirements .................................................................................................................... 8 5.4.3 Notes on requirements for reaction to fire................................................................................................... 9 Annex A (informative)

Addendum to sub-clause 5.4.3, relating to fire performance ....................... 10 Bibliography.................................................................................................................................................................. 11

SIST EN 438-6:2016

EN 438-6:2016 (E) 3 European foreword This document (EN 438-6:2016) has been prepared by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 438-6:2005. EN 438, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates), consists of the following parts: — Part 1: Introduction and general information — Part 2: Determination of properties — Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates — Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates — Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes — Part 8: Classification and specifications for design laminates — Part 9: Classification and specifications for alternative core laminates According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 438-6:2016

EN 438-6:2016 (E) 4 1 Scope This European Standard applies to Exterior-grade Compact laminates of thickness 2 mm and greater produced by using a high pressure process. It specifies requirements for standard and flame-retardant laminates intended for use under outdoor weather conditions such as direct sunlight rain and frost. Two levels of performance are specified; one for moderate exterior conditions, and the other for severe exterior conditions. Laminates complying with this European Standard are referred to as Exterior-grade Compact laminates, and are characterized by their high tensile strength, high impact resistance, thermal shock resistance, and resistance to weather and corrosion. They are available in a variety of decorative colours, with high resistance to colour change and aging in outdoor applications. When they are self-supporting Exterior-grade Compact laminates are ready for installation, and only require cutting to size, drilling, etc. to suit the application. EN 438-2 specifies the methods of test relevant to this part of EN 438. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 438-2:2016, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 2: Determination of properties EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 13722, Furniture — Assessment of the surface gloss EN ISO 178, Plastics — Determination of flexural properties (ISO 178) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1) EN ISO 11664-2, Colorimetry — Part 2: CIE standard illuminants (ISO 11664-2) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 high-pressure decorative laminate(s) HPL sheet(s) consisting of decorative surface layer(s) and core layers bonded together by an high pressure process Note 1 to entry: Typical values for the high pressure process are a temperature of

s t r
¹C and a pressure of
w MPa. SIST EN 438-6:2016
EN 438-6:2016 (E) 5 3.1.2 surface layer upper decorative layer
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.