EN ISO 3611:2010

Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)

ISO 3611:2010 specifies the most important design and metrological characteristics of micrometers for external measurements:
with analogue indication;
with digital indication: mechanical or electronic digital display.

Geometrische Produktspezifikation (GPS) - Längenmessgeräte: Bügelmessschrauben - Konstruktionsmerkmale und messtechnische Merkmale (ISO 3611:2010)

Diese Internationale Norm legt die wichtigsten Konstruktionsmerkmale und messtechnische Merkmale für Bügelmessschrauben für Maße:
-   mit Skalenanzeige,
-   mit Ziffernanzeige: mechanische oder elektronische Ziffernanzeige
fest.

Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel: Micromètres d'extérieur - Caractéristiques de conception et caractéristiques métrologiques (ISO 3611:2010)

L'ISO 3611:2010 spécifie les caractéristiques de conception et les caractéristiques métrologiques les plus importantes des micromètres pour mesurages extérieurs
avec indication analogique;
avec indication numérique: affichage numérique mécanique ou électronique.

Specifikacija geometrijskih veličin izdelka - Instrumenti za merjenje dimenzij - Mikrometri za zunanje meritve: konstrukcijske in meroslovne značilnostii (ISO 3611:2010)

Ta mednarodni standard določa najpomembnejše značilnosti za načrtovanje in meroslovje mikrometrov za zunanje meritve z največjim razponom merjenja 500 mm, – z analogno indikacijo - z digitalno indikacijo: mehanske ali elektronske digitalne – zaslon.

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2010
• Withdrawal Date: 30-May-2023
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Ref Project: SIST EN ISO 3611:2011 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)

Relations

• Replaced By: EN ISO 3611:2023 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2011
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND,QVWUXPHQWL]DPHUMHQMHGLPHQ]LM
0LNURPHWUL]D]XQDQMHPHULWYHNRQVWUXNFLMVNHLQPHURVORYQH]QDþLOQRVWLL,62

Geometrical product specifications (GPS) - Dimensional measuring equipment:
Micrometers for external measurements - Design and metrological characteristics (ISO
3611:2010)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte: Bügelmessschrauben -
Konstruktionsmerkmale und messtechnische Merkmale (ISO 3611:2010)
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel:
Micromètres d'extérieur - Caractéristiques de conception et caractéristiques
métrologiques (ISO 3611:2010)
Ta slovenski standard je istoveten z: EN ISO 3611:2010
ICS:
17.040.30 Merila Measuring instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 3611
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 17.040.30
English Version
Geometrical product specifications (GPS) - Dimensional
measuring equipment: Micrometers for external measurements -
Design and metrological characteristics (ISO 3611:2010)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Équipement de mesurage dimensionnel: Micromètres Längenmessgeräte: Bügelmessschrauben -
d'extérieur - Caractéristiques de conception et Konstruktionsmerkmale und messtechnische Merkmale
caractéristiques métrologiques (ISO 3611:2010) (ISO 3611:2010)
This European Standard was approved by CEN on 11 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3611:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 3611:2010) has been prepared by Technical Committee ISO/TC 213 “Dimensional
and geometrical product specifications and verification” in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3611:2010 has been approved by CEN as a EN ISO 3611:2010 without any modification.

INTERNATIONAL ISO
STANDARD 3611
Second edition
2010-11-01
Geometrical product specifications
(GPS) — Dimensional measuring
equipment: Micrometers for external
measurements — Design and
metrological characteristics
Spécification géométrique des produits (GPS) — Équipement de
mesurage dimensionnel: Micromètres d'extérieur — Caractéristiques de
conception et caractéristiques métrologiques

Reference number
ISO 3611:2010(E)
©
ISO 2010
ISO 3611:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 3611:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Design characteristics .2
4.1 General design and nomenclature .2
4.2 Main dimensions .3
4.3 Types of indicating devices .3
4.3.1 General .3
4.3.2 Analogue indicating devices.4
4.3.3 Digital indicating devices, with mechanical digital display .5
4.3.4 Digital indicating devices with electronic digital display.6
4.4 Protection for field use .6
4.5 Frame.7
4.6 Measuring faces .7
4.7 Measuring force limiting device.7
4.8 Adjustment devices.7
4.9 Design characteristics (manufacturer's specification).7
5 Metrological characteristics.8
5.1 General .8
5.2 Effect of spindle clamp .8
5.3 Maximum permissible error of indication (limited by MPE).8
5.3.1 General .8
5.3.2 Full surface contact error, J (limited by MPE ) .8
J
5.3.3 Repeatability, R (limited by MPE ).8
R
5.3.4 Partial surface contact error, E (limited by MPE ).8
E
5.4 Measuring forces (limited by MPL) .8
5.5 Instrument specification sheet .8
6 Proof of conformance with specifications.9
7 Marking.9
Annex A (informative) Example of an error-of-indication curve .10
Annex B (informative) Example of data sheet for micrometers for external measurements.11
Annex C (informative) Calibration of metrological characteristics.12
Annex D (informative) Error tests.13
Annex E (informative) Notes on use .15
Annex F (informative) Relation to the GPS matrix model.16
Bibliography.18

ISO 3611:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3611 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product
specifications and verification.
This second edition cancels and replaces the first edition (ISO 3611:1978), which has been technically revised.

iv © ISO 2010 – All rights reserved

ISO 3611:2010(E)
Introduction
This International Standard is a geometrical product specification (GPS) standard and is to be regarded as a
general GPS standard (see ISO/TR 14638). It influences the chain link 5 of the chain of standards on size in
the general GPS matrix.
For more detailed information on the
...