EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)

This document provides the most important design and metrological characteristics of callipers
—          with analogue indication: vernier scale or circular scale (dial), and
—          with digital indication: digital display.

Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Teil 1: Konstruktionsmerkmale und messtechnische Merkmale von Messschiebern (ISO 13385-1:2019)

Dieses Dokument legt die wichtigsten Konstruktionsmerkmale und messtechnischen Merkmale von Messschiebern fest:
- mit analoger Anzeige: Noniusskala oder Rundskala (Skalenträger) und
- mit digitaler Anzeige: Digitalanzeige.

Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1: Caractéristiques de conception et caractéristiques métrologiques des pieds à coulisse (ISO 13385-1:2019)

Le présent document fournit les caractéristiques de conception et les caractéristiques métrologiques les plus importantes des pieds à coulisse
—          à indicateur analogique: échelle du vernier ou échelle circulaire (cadran), et
—          à indicateur numérique: affichage numérique

Specifikacija geometrijskih veličin izdelka (GPS) - Oprema za merjenje dimenzij - 1. del: Konstrukcija in meroslovne karakteristike kljunastih meril (ISO 13385-1:2019)

Ta dokument vsebuje konstrukcijo in najpomembnejše meroslovne karakteristike kljunastih meril: – z analogno indikacijo (vernierjevo lestvico ali krožno lestvico (številčnica)) in – z digitalno indikacijo (digitalni prikaz).

General Information

• Status: Published
• Publication Date: 17-Sep-2019
• Withdrawal Date: 30-Mar-2020
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Sep-2019
• Completion Date: 18-Sep-2019
• Ref Project: SIST EN ISO 13385-1:2019 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)

Relations

• Replaces: EN ISO 13385-1:2011 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
• Effective Date: 25-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN ISO 13385-1:2011
Specifikacija geometrijskih veličin izdelka (GPS) - Oprema za merjenje dimenzij - 1.
del: Konstrukcija in meroslovne karakteristike kljunastih meril (ISO 13385-1:2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1:
Design and metrological characteristics of callipers (ISO 13385-1:2019)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Teil 1: Messschieber;
Konstruktionsmerkmale und messtechnische Anforderungen (ISO 13385-1:2019)
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel
- Partie 1: Caractéristiques de conception et caractéristiques métrologiques des pieds à
coulisse (ISO 13385-1:2019)
Ta slovenski standard je istoveten z: EN ISO 13385-1:2019
ICS:
17.040.30 Merila Measuring instruments
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13385-1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 17.040.30 Supersedes EN ISO 13385-1:2011
English Version
Geometrical product specifications (GPS) - Dimensional
measuring equipment - Part 1: Design and metrological
characteristics of callipers (ISO 13385-1:2019)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Équipement de mesurage dimensionnel - Partie 1: Längenmessgeräte - Teil 1: Konstruktionsmerkmale
Caractéristiques de conception et caractéristiques und messtechnische Anforderungen von
métrologiques des pieds à coulisse (ISO 13385-1:2019) Messschiebern (ISO 13385-1:2019)
This European Standard was approved by CEN on 28 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13385-1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 13385-1:2019) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13385-1:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13385-1:2019 has been approved by CEN as EN ISO 13385-1:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 13385-1
Second edition
2019-08
Geometrical product specifications
(GPS) — Dimensional measuring
equipment —
Part 1:
Design and metrological
characteristics of callipers
Spécification géométrique des produits (GPS) — Équipement de
mesurage dimensionnel —
Partie 1: Caractéristiques de conception et caractéristiques
métrologiques des pieds à coulisse
Reference number
ISO 13385-1:2019(E)
©
ISO 2019
ISO 13385-1:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 13385-1:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design characteristics . 2
4.1 General design and nomenclature . 2
4.2 Dimensions . 2
5 Metrological characteristics . 5
5.1 General . 5
5.2 Rated operating conditions . 5
5.3 Reference point . 5
5.4 Test methods . 5
5.5 Partial surface contact error, E (limited by E ) . 5
MPE
5.6 Shift error, S (limited by S ) . 7
MPE
5.6.1 General. 7
5.6.2 Shift error — Internal measuring faces . 7
5.6.3 Shift error — Crossed knife-edge internal measuring faces . 7
5.6.4 Shift error — Depth or step measuring faces . 8
5.7 MPE values. 9
5.8 Special cases . 9
6 Determination of conformity to specifications . 9
6.1 General . 9
6.2 Measurement uncertainty . 9
6.3 Decision rule .10
7 Marking .10
Annex A (informative) Calibration guidelines for metrological characteristics .11
Annex B (normative) Default MPE values for metrological characteristics .12
Annex C (informative) Relation to the GPS matrix model .13
Bibliography .14
ISO 13385-1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product
specifications and verification.
This second edition cancels and replaces the first edition (ISO 13385-1:2011), which has been technically
revised.
The main changes compared
...