EN 13445-6:2002/A1:2004

Unfired pressure vessels - Part 6 :Requirements for design and fabrication of pressure vessel and vessel parts constructed of spheroidal graphite cast iron - Annex D Assessment of fatigue life

Methodology for determining lifetime of SGCI under pulsating loads

Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit

Récipients sous pression non soumis à la flamme - Partie 6: Exigences pour la conception et la fabrication des récipients sous pression et des parties sous pression moulés en fonte à graphite sphéroidal - Annexe D Evaluation de la durée de vie en fatigue

Neogrevane tlačne posode - 6. del: Zahteve za konstruiranje in proizvodnjo tlačnih posod in delov posode iz nodularne litine - Dodatek D: Ocena odpornosti proti utrujanju

General Information

• Status: Withdrawn
• Publication Date: 27-Apr-2004
• Withdrawal Date: 21-Jul-2009
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54 - Unfired pressure vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Jul-2009
• Completion Date: 22-Jul-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-6:2002/A1:2004 - Unfired pressure vessels - Part 6 :Requirements for design and fabrication of pressure vessel and vessel parts constructed of spheroidal graphite cast iron - Annex D Assessment of fatigue life

Relations

• Replaced By: EN 13445-6:2009 - Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• Effective Date: 25-Jul-2009
• Amends: EN 13445-6:2002 - Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-6:2002/A1:2004
01-september-2004
1HRJUHYDQHWODþQHSRVRGHGHO=DKWHYH]DNRQVWUXLUDQMHLQSURL]YRGQMRWODþQLK
SRVRGLQGHORYSRVRGHL]QRGXODUQHOLWLQH'RGDWHN'2FHQDRGSRUQRVWLSURWL
XWUXMDQMX
Unfired pressure vessels - Part 6 :Requirements for design and fabrication of pressure
vessel and vessel parts constructed of spheroidal graphite cast iron - Annex D
Assessment of fatigue life
Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung
von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit
Récipients sous pression non soumis a la flamme - Partie 6: Exigences pour la
conception et la fabrication des récipients sous pression et des parties sous pression
moulés en fonte a graphite sphéroidal - Annexe D Evaluation de la durée de vie en
fatigue
Ta slovenski standard je istoveten z: EN 13445-6:2002/A1:2004
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-6:2002/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13445-6:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2004
ICS 23.020.30
English version
Unfired pressure vessels - Part 6 :Requirements for design and
fabrication of pressure vessel and vessel parts constructed of
spheroidal graphite cast iron - Annex D Assessment of fatigue
life
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 6: Anforderungen an
6: Exigences pour la conception et la fabrication des Druckbehälter und Druckbehältern-Teile aus Gusseisen mit
récipients sous pression et des parties sous pression Kugelgraphit
moulés en fonte à graphite sphéroidal - Annexe D
Evaluation de la durée de vie en fatigue
This amendment A1 modifies the European Standard EN 13445-6:2002; it was approved by CEN on 9 February 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-6:2002/A1:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13445-6:2002/A1:2004 (E)
Contents page
Foreword. 3
Annex D (normative) Assesment of fatigue life . 4
D.1 Purpose. 4
D.2 Specific definitions . 4
D.3 Specific symbols and abbreviations. 4
D.4 Limitations. 4
D.5 General. 5
D.6 Determination of allowable number of pressure cycles . 5
D.6.1 Pseudo-elastic stress range Dss. 5
D.6.2 Corrections to stress range. 5
D.6.3 Fictitious stress range.
...