EN 13925-2:2003

Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures

This standard outlines the basic procedures applied in the X-ray Powder Diffraction (XRPD) method. Many of these procedures are common to most types of diffractometer used and type of analysis mentionen in prEN WI 00138079 (General Principles). In the interests of clarity and immediate usability more detail is given for procedures using instruments with Bragg-Brentano geometry and application to phase identification. Aspects of specimen preparation and data quality assessment are included, but the standard remains non-exhaustive.

Zerstörungsfreie Prüfung - Röntgendiffraktometrie von polykristallinen und amorphen Materialien - Teil 2: Verfahrensabläufe

Diese Europäische Norm stellt grundlegende Verfahrensabläufe dar, die bei der Anwendung der Röntgenpulverdiffraktometrie zur Anwendung kommen. Viele dieser Verfahrensabläufe sind von allgemeiner Bedeutung sowohl für die Mehrzahl der verschiedenen Diffraktometertypen, als auch für die Mehrzahl der verschiedenen Analysenarten, die in prEN WI 00138079 aufgeführt sind. Im Interesse der Übersichtlichkeit und der unmittelbaren Anwendbarkeit der Norm, konzentriert sich die Darstellung auf Arbeitsabläufe, die typisch sind für die Anwendung von Bragg-Brentano Diffraktometern in der Phasenidentifizierung.

Essais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 2: Procédures

La présente Norme européenne spécifie les procédures de base appliquées dans la méthode de diffraction des rayons X par les poudres (DRXP). Beaucoup de ces procédures sont communes à la plupart des types de diffractomètre utilisés et des types d'analyse mentionnés dans l'EN 13925-1. Par souci de clarté et d'utilisation immédiate, plus de détails sont donnés sur les procédures utilisant des instruments à géométrie Bragg-Brentano et avec despour les applications d'identification des de phases. Des Divers aspects de préparation des échantillons et d'évaluation de la qualité des données sont inclus, mais la norme reste non exhaustive. Il est prévu que des normes particulières traitent plus en détail lesde domaines d'application spécifiques.

Neporušitveno preskušanje – Uklon rentgenskih žarkov na polikristalnih in amorfnih materialih – 2. del: Postopki

General Information

• Status: Published
• Publication Date: 11-Mar-2003
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138 - Non-destructive testing
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2024
• Completion Date: 02-Dec-2024
• Ref Project: SIST EN 13925-2:2004 - Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitveno preskušanje – Uklon rentgenskih žarkov na polikristalnih in amorfnih materialih – 2. del: PostopkiZerstörungsfreie Prüfung - Röntgendiffraktometrie von polykristallinen und amorphen Materialien - Teil 2: VerfahrensabläufeEssais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 2: ProcéduresNon-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN 13925-2:2003SIST EN 13925-2:2004en01-marec-2004SIST EN 13925-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13925-2March 2003ICS 19.100English versionNon-destructive testing - X-ray diffraction from polycrystallineand amorphous materials - Part 2: ProceduresEssais non destructifs - Diffraction des rayons X appliquéeaux matériaux polycristallins et amorphes - Partie 2:ProcéduresZerstörungsfreie Prüfung - Röntgendiffraktometrie vonpolykristallinen und amorphen Materialien - Teil 2:VerfahrensabläufeThis European Standard was approved by CEN on 29 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13925-2:2003 ESIST EN 13925-2:2004

(informative)
Relationship between the XRPD standards.17Annex B (informative) Example of Report Form.18Annex C (informative) Scheme of a typical procedure for XRPD measurements.19Annex D
(informative)
Some analytical functions used for profile fitting.20Annex E
(informative)
Some methods for testing the internal consistency of XRPD data.21E.1General.21E.2Figures of Merit for FWHMs and intensities.21E.3Figures of Merit for line positions and lattice parameters.22Bibliography.23SIST EN 13925-2:2004

1)a European draft standard (WI 00138078 "Non-destructive testing – X-ray powder diffraction – Terminology") is inpreparationSIST EN 13925-2:2004
...