EN ISO 2739:2010

Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)

ISO 2739:2006 specifies a method of measuring the radial crushing strength of sintered metal parts in the form of hollow cylinders, commonly known as bushes.
This method is applicable to sintered bushes composed of pure or alloyed metal powders.

Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006)

Diese Internationale Norm legt ein Verfahren zur Messung der radialen Bruchfestigkeit von Sintermetallen in Form von hohlen Zylindern, allgemein als Lagerbuchsen bekannt, fest.
Dieses Verfahren gilt für Sinterbuchsen, die aus reinen oder legierten Metallpulvern bestehen.

Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO 2739:2006)

L'ISO 2739:2006 spécifie une méthode pour mesurer la résistance à l'écrasement radial des pièces en métal fritté se présentant sous forme de cylindres creux, communément appelés «bagues».
Cette méthode s'applique aux bagues frittées, élaborées à partir de métaux purs ou d'alliages.

Puše iz sintranih kovin - Določanje radialne lomne trdnosti (ISO 2739:2006)

Ta mednarodni standard določa metodo merjenja radialne lomne trdnosti sintranih metalnih delov v obliki votlih cilindrov, splošno znanih kot puše. Ta metoda velja za sintrane puše, sestavljene iz čistih ali zlitih kovinskih praškov.

General Information

• Status: Withdrawn
• Publication Date: 27-Apr-2010
• Withdrawal Date: 17-Jul-2012
• ICS: 77.040.10 - Mechanical testing of metals
• ICS: 77.160 - Powder metallurgy
• Technical Committee: CEN/SS M11 - Powder metallurgy
• Drafting Committee: CEN/SS M11 - Powder metallurgy
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Jul-2012
• Completion Date: 18-Jul-2012
• Ref Project: SIST EN ISO 2739:2010 - Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)

Relations

• Replaces: EN ISO 2739:1998 - Sintered metal bushes - Determination of radial crushing strength (ISO 2739:1973)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 2739:2012 - Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
• Effective Date: 06-Sep-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2739:2010
01-julij-2010
1DGRPHãþD
SIST EN ISO 2739:2000
3XãHL]VLQWUDQLKNRYLQ'RORþDQMHUDGLDOQHORPQHWUGQRVWL,62
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)
Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006)
Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO
2739:2006)
Ta slovenski standard je istoveten z: EN ISO 2739:2010
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 2739:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2739:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 2739:2010


EUROPEAN STANDARD
EN ISO 2739

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2010
ICS 77.040.10; 77.160 Supersedes EN ISO 2739:1998
English Version
Sintered metal bushes - Determination of radial crushing
strength (ISO 2739:2006)
Bagues en métal fritté - Détermination de la résistance à Buchsen aus Sintermetall - Bestimmung der radialen
l'écrasement radial (ISO 2739:2006) Bruchfestigkeit (ISO 2739:2006)
This European Standard was approved by CEN on 16 April 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2739:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2739:2010
EN ISO 2739:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2739:2010
EN ISO 2739:2010 (E)
Foreword
The text of ISO 2739:2006 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 2739:2010.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2739:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2739:2006 has been approved by CEN as a EN ISO 2739:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 2739:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 2739:2010


INTERNATIONAL ISO
STANDARD 2739
Second edition
2006-11-01


Sintered metal bushes — Determination
of radial crushing strength
Bagues en métal fritté — Détermination de la résistance à l'écrasement
radial





Reference number
ISO 2739:2006(E)
©
ISO 2006

---------------------- Page: 7 ----------------------

SIST EN ISO 2739:2010
ISO 2739:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In a
...