SIST EN ISO 2739:2010
(Main)Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)
This International Standard specifies a method of measuring the radial crushing strength of sintered metal parts in the form of hollow cylinders, commonly known as bushes. This method is applicable to sintered bushes composed of pure or alloyed metal powders.
Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006)
Diese Internationale Norm legt ein Verfahren zur Messung der radialen Bruchfestigkeit von Sintermetallen in
Form von hohlen Zylindern, allgemein als Lagerbuchsen bekannt, fest.
Dieses Verfahren gilt für Sinterbuchsen, die aus reinen oder legierten Metallpulvern bestehen.
Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO 2739:2006)
L'ISO 2739:2006 spécifie une méthode pour mesurer la résistance à l'écrasement radial des pièces en métal fritté se présentant sous forme de cylindres creux, communément appelés «bagues».
Cette méthode s'applique aux bagues frittées, élaborées à partir de métaux purs ou d'alliages.
Puše iz sintranih kovin - Določanje radialne lomne trdnosti (ISO 2739:2006)
Ta mednarodni standard določa metodo merjenja radialne lomne trdnosti sintranih metalnih delov v obliki votlih cilindrov, splošno znanih kot puše. Ta metoda velja za sintrane puše, sestavljene iz čistih ali zlitih kovinskih praškov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2739:2010
01-julij-2010
1DGRPHãþD
SIST EN ISO 2739:2000
3XãHL]VLQWUDQLKNRYLQ'RORþDQMHUDGLDOQHORPQHWUGQRVWL ,62
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)
Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006)
Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO
2739:2006)
Ta slovenski standard je istoveten z: EN ISO 2739:2010
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 2739:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 2739:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 2739:2010
EUROPEAN STANDARD
EN ISO 2739
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 77.040.10; 77.160 Supersedes EN ISO 2739:1998
English Version
Sintered metal bushes - Determination of radial crushing
strength (ISO 2739:2006)
Bagues en métal fritté - Détermination de la résistance à Buchsen aus Sintermetall - Bestimmung der radialen
l'écrasement radial (ISO 2739:2006) Bruchfestigkeit (ISO 2739:2006)
This European Standard was approved by CEN on 16 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2739:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 2739:2010
EN ISO 2739:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 2739:2010
EN ISO 2739:2010 (E)
Foreword
The text of ISO 2739:2006 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 2739:2010.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2739:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2739:2006 has been approved by CEN as a EN ISO 2739:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 2739:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 2739:2010
INTERNATIONAL ISO
STANDARD 2739
Second edition
2006-11-01
Sintered metal bushes — Determination
of radial crushing strength
Bagues en métal fritté — Détermination de la résistance à l'écrasement
radial
Reference number
ISO 2739:2006(E)
©
ISO 2006
---------------------- Page: 7 ----------------------
SIST EN ISO 2739:2010
ISO 2739:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Pa
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006)Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO 2739:2006)Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)77.160Metalurgija prahovPowder metallurgy77.040.10Mehansko preskušanje kovinMechanical testing of metalsICS:Ta slovenski standard je istoveten z:FprEN ISO 2739kSIST FprEN ISO 2739:2010en,fr,de01-januar-2010kSIST FprEN ISO 2739:2010SLOVENSKI
STANDARD
kSIST FprEN ISO 2739:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 2739
October 2009 ICS 77.160; 77.040.10 Will supersede EN ISO 2739:1998English Version
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:2006)
Bagues en métal fritté - Détermination de la résistance à l'écrasement radial (ISO 2739:2006)
Buchsen aus Sintermetall - Bestimmung der radialen Bruchfestigkeit (ISO 2739:2006) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/SS M11.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 2739:2009: EkSIST FprEN ISO 2739:2010
FprEN ISO 2739:2009 (E) 2 Contents Page Foreword .3 kSIST FprEN ISO 2739:2010
FprEN ISO 2739:2009 (E) 3 Foreword The text of ISO 2739:2006 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 2739:2009. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN ISO 2739:1998. Endorsement notice The text of ISO 2739:2006 has been approved by CEN as a FprEN ISO 2739:2009 without any modification.
kSIST FprEN ISO 2739:2010
kSIST FprEN ISO 2739:2010
Reference numberISO 2739:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO2739Second edition2006-11-01Sintered metal bushes — Determination of radial crushing strength Bagues en métal fritté — Détermination de la résistance à l'écrasement radial
kSIST FprEN ISO 2739:2010
ISO 2739:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2006 – All rights reserved
kSIST FprEN ISO 2739:2010
ISO 2739:2006(E) © ISO 2006 – All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the ri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.