iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 2591-403

(Main)

Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration

Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration

This document specifies a method of determining the ability of elements of connection to withstand sinusoidal or random vibrations of specified severities.
It will be used together with EN 2591-100.
This test is based on EN 60068-2-6 and EN 60068-2-64.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 403: Sinus- und rauschförmige Schwingungen

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 403 : Vibrations sinusoïdales et aléatoires

Le présent document spécifie une méthode pour déterminer l'aptitude des organes de connexion à supporter des vibrations sinusoïdales et aléatoires à des sévérités spécifiées.
Il doit être utilisé conjointement avec l'EN 2591-100.
Cet essai est basé sur l'EN 60068-2-6 et l’EN 60068-2-64.

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 403. del: Sinusna in naključna nihanja

General Information

Status
Not Published
Publication Date
13-Oct-2024
ICS
49.060 - Aerospace electric equipment and systems
49.090 - On-board equipment and instruments
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
14-Mar-2024
Completion Date
14-Mar-2024
Ref Project
oSIST prEN 2591-403:2023 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration

Relations

Revises
EN 2591-403:2018 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
Effective Date
12-Oct-2022

Buy Standard

prEN 2591-403:2023prEN 2591-403:2023
PreviousNext
Draft
prEN 2591-403:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2591-403:2023
01-april-2023
Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 403.
del: Sinusna in naključna nihanja
Aerospace series - Elements of electrical and optical connection - Test methods - Part
403: Sinusoidal and random vibration
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 403: Sinus- und rauschförmige Schwingungen
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d’essais -
Partie 403: Vibrations sinusoïdales et aléatoires
Ta slovenski standard je istoveten z: prEN 2591-403
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 2591-403:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2591-403:2023

---------------------- Page: 2 ----------------------
oSIST prEN 2591-403:2023


DRAFT
EUROPEAN STANDARD
prEN 2591-403
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2023
ICS 49.060; 49.090 Will supersede EN 2591-403:2018
English Version

Aerospace series - Elements of electrical and optical
connection - Test methods - Part 403: Sinusoidal and
random vibration
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 403: Vibrations Verbindungselemente - Prüfverfahren - Teil 403:
sinusoïdales et aléatoires Sinus- und rauschförmige Schwingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2591-403:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2591-403:2023
prEN 2591-403:2023(E)
Contents Page
European foreword . 3
4.1 Preparation . 5
4.2 Technical details – Technical specification . 5
5.1 General. 5
5.2 Apparatus . 5
5.3 Initial measurements . 5
5.4 Procedure . 5
5.4.1 Endurance . 5
5.4.2 Test duration .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3375-009:2023(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
SIST EN 3375-009:2023

This document specifies the required characteristics of single braid, 120 ohms, size 26, electrical cable type WX, UV laser markable, intended for digital data transmissions.
It is used together with EN 3375 001.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-509:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
SIST EN 2591-509:2023

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-508:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts
SIST EN 2591-508:2023

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-011:2022(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
SIST EN 3375-011:2023

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-001:2022(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
SIST EN 3375-001:2022

This document specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-412:2022(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
SIST EN 3745-412:2022

This document evaluates the resistance of the fiber optic cable to humidity changes at different
temperatures.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4533-001:2020(Main)
Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
SIST EN 4533-001:2020

1.1   General
Part 001 of EN 4533 examines the termination of optical fibre cables used in aerospace applications. Termination is the act of installing an optical terminus onto the end of a buffered fibre or fibre optic cable. It encompasses several sequential procedures or practices. Although termini will have specific termination procedures, many share common elements and these are discussed in this document. Termination is required to form an optical link between any two network or system components or to join fibre optic links together.
The fibre optic terminus features a precision ferrule with a tight tolerance central bore hole to accommodate the optical fibre (suitably bonded in place and highly polished). Accurate alignment with another (mating) terminus will be provided within the interconnect (or connector) alignment mechanism. As well as single fibre ferrules, it is noted that multi-fibre ferrules exist (e.g. the MT ferrule) and these will also be discussed in this part of the handbook.
Another technology used to connect 2 fibres is the expanded beam. 2 ball lenses are used to expand, collimate and then refocus the light from and to fibres. Contacts are not mated together. It helps reducing the wear between 2 contacts and allows more mating cycles. This technology is less sensitive to misalignments and dust. Losses are remaining more stable than butt joint contact even if the nominal loss is higher.
A Note on Terminology
Current terminology in the aerospace fibre optics community refers to an optical terminus or termini. The term optical contact may be seen in some documents and has a similar meaning. However, the term contact is now generally reserved for electrical interconnection pins. The optical terminus (or termini) is housed within an interconnect (connector is an equivalent term). Interconnects can be single-way or multi-way. The interconnect or connector will generally house the alignment mechanism for the optical termini (usually a precision split-C sleeve made of ceramic or metal). The reader should be aware of these different terms.
An optical link can be classified as a length of fibre optic cable terminated at both ends with fibre optic termini. The optical link provides the transmission line between any two components via the optical termini which are typically housed within an interconnecting device (typically a connector) with tight tolerancing within the alignment mechanisms to ensure a low loss light transmission.
Part 001 will explain the need for high integrity terminations, provide an insight into component selection issues and suggests best practice when terminating fibres into termini for high integrity applications. A detailed review of the termination process can be found in section 4 of this part and is organised in line with the sequence of a typical termination procedure.
The vast number of cable constructions and connectors available make defining a single termination instruction that is applicable to all combinations very difficult. Therefore, this handbook concentrates on the common features of most termination practices and defining best practice for current to near future applications of fibre optics on aircraft. This has limited the studies within this part to currently available ‘avionic’ silica fibre cables and adhesive filled butt-coupled type connectors. Many of the principles described however would still be applicable for other termination techniques. Other types of termination are considered further in the repair part of this handbook.
It is noted that the adhesive based pot-and-polish process is applicable to the majority of single-way fibre optic interconnects connectors and termini for multi-way interconnects and connectors. They share this commonality.
1.2   Need to high integrity terminations
(...)

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-404:2019(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
SIST EN 3745-404:2019

This document specifies a method to determine the effects of thermal shock on an optical fibre or cable.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-506:2018(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance
SIST EN 3745-506:2019

This document specifies a method to determine the ability of an optical fibre or cable to withstand impact under specified environmental conditions.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4641-200:2018(Main)
Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard
SIST EN 4641-200:2019

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 9/125 µm, MM fibre core, and 900 µm outside cable diameter and of semi loose buffer construction for "inside avionics box" equipment fibre harnessing.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day