EN 13445-3:2002/A17:2007

Unfired pressure vessels - Part 3: Design

Complex editorial changes to the layout of Annex J of this standard.

Unbefeuerte Druckbehälter - Teil 3: Konstruktion

Récipients sous pression non soumis à la flamme - Partie 3 : Conception

Neogrevane tlačne posode - 3. del: Konstruiranje

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2007
• Withdrawal Date: 28-Jul-2009
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54 - Unfired pressure vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Jul-2009
• Completion Date: 29-Jul-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-3:2002/A17:2008 - Unfired pressure vessels - Part 3: Design

Relations

• Replaced By: EN 13445-3:2009 - Unfired pressure vessels - Part 3: Design
• Effective Date: 22-Dec-2008
• Amends: EN 13445-3:2002 - Unfired pressure vessels - Part 3: Design
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-3:2002/A17:2008
01-januar-2008
1HRJUHYDQHWODþQHSRVRGHGHO.RQVWUXLUDQMH
Unfired pressure vessels - Part 3: Design
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Récipients sous pression non soumis a la flamme - Partie 3 : Conception
Ta slovenski standard je istoveten z: EN 13445-3:2002/A17:2007
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-3:2002/A17:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13445-3:2002/A17
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2007
ICS 23.020.30

English Version
Unfired pressure vessels - Part 3: Design
Récipients sous pression non soumis à la flamme - Partie 3 Unbefeuerte Druckbehälter - Teil 3: Konstruktion
: Conception
This amendment A17 modifies the European Standard EN 13445-3:2002; it was approved by CEN on 26 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-3:2002/A17:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13445-3:2002/A17:2007 (E)
Contents Page
Foreword.3
Annex J (normative) Alternative method for the design of heat exchanger tube sheets.4
J.3 Specific symbols and abbreviations .4
J.3.3 Symbols .4
J.5 Parameters for all types .5
J.5.1 Diameters and widths.5

2

---------------------- Page: 3 ----------------------

EN 13445-3:2002/A17:2007 (E)
Foreword
This document (EN 13445-3:2002/A17:2007) has been prepared by Technical Committee CEN/TC 54
“Unfired pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-3:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national
standards shall be withdrawn at the latest by April 2008.
The document includes the text of the amendment itself. The corrected pages of EN 13445-3 will be delivered
as issue 29 of the standard.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.

3

---------------------- Page: 4 ----------------------

EN 13445-3:2002/A17:2007 (E)
Annex J
(normative)

Alternative method for the design of heat exchanger tube sheets
J.3 Specific symbols and abbreviations
Change the following symbols in Annex J.3.3:
J.3.3 Symbols
Add the following symbols:
2
A is the minimum area of the tubed region, [mm ], see J.5.1.1.3.2;
R()min
d is the average of d and d , [mm], see J.5.1.1.4;
1()av 1()min 1()max
d is the maximum value of d , [mm], see J.5.1.1.2;
1()max 1
d is the minimum valu
...