EN 15651-1:2012

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements

This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face.
NOTE   Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5.
This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in internal walls and/or partitions and to oil-based mastics.

Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 1: Fugendichtstoffe für Fassadenelemente

Diese Europäische Norm legt Definitionen für und Anforderungen an nicht tragende Fassadendichtstoffe fest, die im Hochbau für den Außenbereich zum Abdichten von Fugen in Außenwänden, an Fenster- und Türumfassungen einschließlich der Sichtflächen im Innenbereich vorgesehen sind.
ANMERKUNG   Festlegungen zur Bewertung der Konformität (d. h. zur Erstprüfung sowie zur werkseigenen Produk-tionskontrolle) und zur Kennzeichnung dieser Produkte werden in EN 15651 5 angegeben.
Diese Europäische Norm gilt weder für nicht plastische (nicht in pastöser Form vorliegende) Fugendichtstoffe für nicht tragende Anwendungen, noch für Fugendichtstoffe, die in Innen- und/oder Zwischenwänden ange-wendet werden, und nicht für Mastixharze auf Ölbasis.

Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 1 : Mastics pour éléments de façade

La présente Norme européenne spécifie les définitions et les exigences relatives aux mastics pour joints de façade non structuraux destinés à calfeutrer des joints de murs extérieurs, des joints au périmètre de fenêtres et de portes dans la construction immobilière, y compris la face intérieure.
NOTE   Les dispositions concernant l’évaluation de la conformité (à savoir l’essai de type initial et le contrôle de la production en usine) et le marquage de ces produits sont données dans le EN 15651-5.
Cette Norme européenne ne s’applique ni aux mastics pour joints non structuraux sous une forme autre que pâteuse, ni à ceux utilisés dans les murs et/ou les cloisons intérieurs, ni aux mastics à base d’huile.

Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 1. del: Tesnilne mase za fasade

Ta evropski standard določa definicije in zahteve za nekonstrukcijske tesnilne mase za fasade, ki so namenjene za tesnjenje stikov zunanjih zidov, oken in vrat pri gradnji stavb, vključno z notranjo fasado. OPOMBA Določila o vrednotenju skladnosti (tj. začetni tipski preskusi in kontrola proizvodnje v obratu) in označevanju teh izdelkov so podana v standardu EN 15651-5. Ta evropski standard se ne uporablja za nekonstrukcijske tesnilne mase, ki niso v obliki paste, tesnilne mase, ki se uporabljajo v notranjih zidovih in/ali zaščitnih ploščah, ter kite na osnovi olja.

General Information

• Status: Withdrawn
• Publication Date: 11-Sep-2012
• Withdrawal Date: 14-Feb-2017
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 349 - Sealants for joints in building construction
• Drafting Committee: CEN/TC 349/WG 1 - Sealants for facade
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Feb-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/474 - Standardisation mandate to CEN/CENELEC concerning the execution of standardisation work for harmonized standards on sealants for non-structural use in buildings and pedestrian walkways
• Ref Project: SIST EN 15651-1:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements

Relations

• Replaces: EN 15651-1:2010 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
• Effective Date: 19-Sep-2012
• Replaced By: EN 15651-1:2017 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
• Effective Date: 22-Feb-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 1. del: Tesnilne mase za fasadeFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 1: Fugendichtstoffe für FassadenelementeMastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 1 : Mastics pour éléments de façadeSealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.10Stene. Predelne stene. FasadeWalls. Partitions. FacadesICS:Ta slovenski standard je istoveten z:EN 15651-1:2012SIST EN 15651-1:2013en,fr,de01-april-2013SIST EN 15651-1:2013SLOVENSKI
STANDARDSIST EN 15651-1:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-1
September 2012 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 1 : Mastics pour éléments de façade
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 1: Fugendichtstoffe für Fassadenelemente This European Standard was approved by CEN on 10 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-1:2012: ESIST EN 15651-1:2013

Example on the frequency of tests for factory production control . 13Annex ZA (informative)
Clause of this European Standard addressing the provisions of EU Construction Products Directive . 14ZA.1Scope and relevant characteristics . 14ZA.2Procedure for attestation of conformity of non-structural sealants for external and/or internal side of facade elements . 16ZA.2.1Systems of attestation of conformity . 16ZA.2.2EC certificate of conformity and EC declaration of conformity . 19ZA.3CE marking and labelling . 23ZA.3.1 General . 23ZA.3.2 CE marking on the packaging . 23ZA.3.3 CE marking in the accompanying commercial documents . 24Bibliography . 26 SIST EN 15651-1:2013

2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products  Conditioning procedures and general rules for selection of substrates EN 13501-1:2007+A1, Fire classification of construction products and building elements  Part 1: Classification using data from reaction to fire tests EN 15651-5:2012, Sealants for non-structural use in joints in buildings and pedestrian walkways  Part 5: Evaluation of conformity and marking EN ISO 868, Plastics and ebonite  Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868) EN ISO 1183-1:2004, Plastics  Methods for determining the density of non-cellular plastics  Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 6927:2012, Buildings and civil engineering works — Sealants — Vocabulary (ISO 6927:2012) EN ISO 7389, Building construction  Jointing products  Determination of elastic recovery of sealants (ISO 7389) EN ISO 7390, Building construction  Jointing products  Determination of resistance to flow of sealants (ISO 7390) EN ISO 8339, Building construction  Sealants  Determination of tensile properties (Extension to break) (ISO 8339) EN ISO 8340, Building construction  Sealants  Determination of tensile properties at maintained extension (ISO 8340) EN ISO 9046, Building construction  Jointing products  Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046) EN ISO 9047, Building construction  Jointing products  Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047) EN ISO 10563, Building construction  Sealants  Determination of change in mass and volume (ISO 10563) SIST EN 15651-1:2013

3.4 uncured/wet state of a sealant prior to the above transformation 4 Requirements 4.1 Ide
...