EN 15651-5:2017
(Main)Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
This European Standard specifies procedures for assessment and verification of constancy of performance of sealants for non-structural use in joints in building construction and pedestrian walkways.
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 5: Bewertung und Überprüfung der Leistungsbeständigkeit, Kennzeichnung und Etikettierung
Diese Europäische Norm legt Verfahren zur Bewertung und Überprüfung der Leistungsbeständigkeit von Fugendichtstoffen für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen fest.
Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 5 : Évaluation et vérification de la constance des performances, du marquage et de l'étiquetage
La présente Norme européenne spécifie les modes opératoires d'évaluation et de vérification de la constance des performances des mastics pour joints non structuraux dans les constructions immobilières et pour chemins piétonniers.
Tesnilne mase za nekonstrukcijske stike v stavbah in na površinah za pešce - 5. del: Ocenjevanje in preverjanje nespremenljivosti lastnosti, označevanje in etiketiranje
Ta evropski standard določa postopke za ocenjevanje in preverjanje nespremenljivosti lastnosti tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWLNHWLUDQMHFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 5: Bewertung und Überprüfung der Leistungsbeständigkeit, Kennzeichnung und EtikettierungMastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 5 : Évaluation et vérification de la constance des performances, du marquage et de l'étiquetageSealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-5:2017SIST EN 15651-5:2017en,fr,de01-april-2017SIST EN 15651-5:2017SLOVENSKI
STANDARDSIST EN 15651-5:20121DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-5
March
t r s y ICS
{ sä s r rä w r Supersedes EN
s w x w sæ wã t r s tEnglish Version
Sealants for nonæstructural use in joints in buildings and pedestrian walkways æ Part
wã Assessment and verification of constancy of performanceá marking and labelling Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers æ Partie
w ã Évaluation et vérification de la constance des performancesá du marquage et de l 5étiquetage
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen æ Teil
wã Bewertung und Überprüfung der Leistungsbeständigkeitá Kennzeichnung und Etikettierung This European Standard was approved by CEN on
t w December
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w x w sæ wã t r s y ESIST EN 15651-5:2017
This can be used to ensure that the product being tested under FPC corresponds to the product subjected to the product type determination, within the permitted tolerances. 3.4 performance test test carried out to verify a value for a required property of the product in terms of its specified performance during application and use Note 1 to entry: This is to ensure that the product conforms to its specified performance characteristics. 3.5 declared value value declared and documented by the manufacturer for identification or performance requirements 3.6 threshold value value given to guarantee a minimum product performance below which it could not be considered fit for a specific intended use SIST EN 15651-5:2017
factory production control by the manufacturer, including product assessment. The manufacturer shall always retain the overall control and shall have the necessary means to take responsibility for the conformity of the product with its declared performance(s). 5.2 Type testing 5.2.1 General All performances related to characteristics included in this standard shall be determined when the manufacturer intends to declare the respective performances unless the standard gives provisions for declaring them without performing tests. (e.g. use of previously existing data, CWFT (Classified Without Further Testing) and conventionally accepted performance). SIST EN 15651-5:2017
Same AVCP system means testing by an independent third party, under the responsibility of a notified product certification body. For the purposes of assessment, the manufacturer's products may be grouped into families, where it is considered that the results for one or more characteristics from any one product within the family are representative for that same characteristics for all products within that same family. NOTE 2 Products may be grouped in different families for different characteristics. Reference to the assessment method standards should be made to allow the selection of a suitable representative sample. In addition, the determination of the product type shall be performed for all characteristics included in the standard for which the manufacturer declares the performance: — at the beginning of the production of a new or modified sealant for non-structural use in joints in buildings and pedestrian walkways (unless a member of the same product range), or — at the beginning of a new or modified method of production (where this may affect the stated properties); or they shall be repeated for the appropriate characteristic(s), whenever a change occurs in the sealants for non-structural use in joints in buildings and pedestrian walkways design, in the raw material or in the supplier of the components, or in the method of production (subject to the definition of a family), which would affect significantly one or more of the characteristics. Where components are used whose characteristics have already been determined, by the component manufacturer, on the basis of assessment methods of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.