EN ISO 16871:2003

Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)

ISO 16871:2003 specifies a method for exposing plastics pipes and fittings, individually or assembled, or as pieces therefrom, to natural weathering in order to assess changes.
The exposure is considered appropriate for evaluating components subject to yard storage prior to installation and use without further exposure to direct weathering, and is quantified to promote rationalization of exposure doses and comparability of data.
For exposures appropriate to tropical or equatorial conditions, attention is drawn to ISO 877.

Kunststoff-Rohrleitungs- und Schutzrohrsysteme - Rohre und Formstücke aus Kunststoffen - Verfahren für die Bewitterung im Freien (ISO 16871:2003)

Diese Internationale Norm legt ein Verfahren fest zur Freibewitterung von einzelnen oder zusammengefügten Rohren und Formstücken aus Kunststoff oder Abschnitten davon, um Änderungen zu bewerten.
ANMERKUNG 1   Die Bewitterung wird als geeignet angesehen, um Werkstücke, die vor ihrem Einbau und ihrer Verwendung einer Hoflagerung ohne weitere direkte Bewitterung ausgesetzt sind, zu bewerten und ist entsprechend quantifiziert, um die Rationalisierung der Bewitterungszeiten und die Vergleichbarkeit von Daten zu beschleunigen.
ANMERKUNG 2   Bezüglich Bewitterung unter tropischen oder äquatorialen Bedingungen wird auf ISO 877 hingewiesen.

Systèmes de canalisations et de gaines en matières plastiques - Tubes et raccords en matières plastiques - Mèthode pour l'exposition directe aux intempéries (ISO 16871:2003)

L'ISO 16871:2003 spécifie une méthode d'exposition des tubes et raccords en plastique, pris individuellement ou assemblés, ou de parties prélevées, par exposition directe aux intempéries afin d'évaluer les changements produits.
L'exposition est considérée comme appropriée pour l'évaluation des composants sujets au stockage extérieur avant l'installation et utilisés sans autre exposition directe aux intempéries. Elle est quantifiée pour promouvoir la rationalisation des doses d'exposition et la comparaison des données.
Se reporter à l'ISO 877 pour les conditions d'exposition adaptées aux tropiques ou à l'équateur.

Cevni in zaščitni sistemi iz polimernih materialov - Cevi in fitingi iz polimernih materialov - Metoda izpostave naravnim vremenskim vplivom (ISO 16871:2003)

General Information

• Status: Published
• Publication Date: 14-May-2003
• ICS: 23.040.20 - Plastics pipes
• ICS: 23.040.45 - Plastics fittings
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 15-Oct-2008
• Completion Date: 15-Oct-2008
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: SIST EN ISO 16871:2003 - Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)

Relations

• Replaces: EN 1056:1996 - Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16871:2003
01-oktober-2003
1DGRPHãþD
SIST EN 1056:1997
&HYQLLQ]DãþLWQLVLVWHPLL]SROLPHUQLKPDWHULDORY&HYLLQILWLQJLL]SROLPHUQLK
PDWHULDORY0HWRGDL]SRVWDYHQDUDYQLPYUHPHQVNLPYSOLYRP,62
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to
direct (natural) weathering (ISO 16871:2003)
Kunststoff-Rohrleitungs- und Schutzrohrsysteme - Rohre und Formstücke aus
Kunststoffen - Verfahren für die Bewitterung im Freien (ISO 16871:2003)
Systemes de canalisations et de gaines en matieres plastiques - Tubes et raccords en
matieres plastiques - Methode pour l'exposition directe aux intempéries (ISO
16871:2003)
Ta slovenski standard je istoveten z: EN ISO 16871:2003
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
SIST EN ISO 16871:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16871:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 16871:2003
EUROPEAN STANDARD
EN ISO 16871
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 23.040.20; 23.040.45 Supersedes EN 1056:1996
English version
Plastics piping and ducting systems - Plastics pipes and fittings -
Method for exposure to direct (natural) weathering (ISO
16871:2003)
Systèmes de canalisations et de gaines en matières Kunststoff-Rohrleitungs- und Schutzrohrsysteme - Rohre
plastiques - Tubes et raccords en matières plastiques - und Formstücke aus Kunststoffen - Verfahren für die
Mèthode pour l'exposition directe aux intempéries (ISO Bewitterung im Freien (ISO 16871:2003)
16871:2003)
This European Standard was approved by CEN on 5 May 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16871:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16871:2003
EN ISO 16871:2003 (E)
CORRECTED  2003-09-24
Foreword
This document (EN ISO 16871:2003) has been prepared by Technical Committee ISO/TC 138
"Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 "Plastics piping systems and ducting systems", the secretariat of which
is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2003, and conflicting national
standards shall be withdrawn at the latest by November 2003.
This document supersedes EN 1056:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 16871:2003 has been approved by CEN as EN ISO 16871:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16871:2003
EN ISO 16871:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated referen
...