EN 3842:2001

Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Circular tubes for fluids
in corrosion resistant steel
Diameter 3,2 mm £ D £ 100 mm
Thickness 0,32 mm £ a £ 2,5 mm
for aerospace applications.

Luft- und Raumfahrt - Runde Leitungsrohre aus korrosionsbeständigem Stahl - Durchmesser 3,2 mm # D # 100 mm - Wanddicke 0,32 mm # a # 2,5 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Runden Leitungsrohren
aus korrosionsbeständigem Stahl
Durchmesser 3,2 mm = D = 100 mm
Wanddicke 0,32 mm = a = 2,5 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Tubes circulaires pour canalisations en aciers résistant à la corrosion - Diamètres 3,2 mm < = D < = 100 mm - Épaisseurs 0,32 mm < = a < = 2,5 mm - Dimensions

Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions

General Information

• Status: Published
• Publication Date: 18-Sep-2001
• Withdrawal Date: 30-Mar-2002
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 3842:2002 - Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2002
Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter
3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions
Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm
< = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions
Luft- und Raumfahrt - Runde Leitungsrohre aus korrosionsbeständigem Stahl -
Durchmesser 3,2 mm # D # 100 mm - Wanddicke 0,32 mm # a # 2,5 mm - Maße
Série aérospatiale - Tubes circulaires pour canalisations en aciers résistant a la
corrosion - Diametres 3,2 mm < = D < = 100 mm - Épaisseurs 0,32 mm < = a < = 2,5
mm - Dimensions
Ta slovenski standard je istoveten z: EN 3842:2001
ICS:
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3842
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 49.080
English version
Aerospace series - Circular tubes for fluids in corrosion resistant
steel - Diameter 3,2 mm
D
100 mm - Thickness 0,32 mm
a

2,5 mm - Dimensions
Série aérospatiale - Tubes circulaires pour canalisations en Luft- und Raumfahrt - Runde Leitungsrohre aus
aciers résistant à la corrosion - Diamètres 3,2 mm
D
korrosionsbeständigem Stahl - Durchmesser 3,2 mm
D

100 mm - Epaisseurs 0,32 mm
a
2,5 mm - Dimensions 100 mm - Dicken 0,32 mm
a
2,5 mm - Maße
This European Standard was approved by CEN on 2 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3842:2001 E
worldwide for CEN national Members.

Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at
the latest by March 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
...