EN 13329:2006+A1:2008

Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods

This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1).
It includes a classification system, based on EN 685, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use. This standard does not specify requirements relating to areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas, but it does apply to domestic kitchens.

Laminatböden - Elemente mit einer Deckschicht auf Basis aminoplastischer, wärmehärtbarer Harze - Spezifikationen, Anforderungen und Prüfverfahren

Diese Europäische Norm legt Merkmale, Anforderungen und Prüfverfahren für Laminatböden fest (wie in 3.1 definiert).
Sie enthält ein Klassifizierungssystem, das auf EN 685 basiert, mit praktischen Anforderungen für bestimmte Verwendungsbereiche und Beanspruchungsklassen. Dies dient dazu aufzuzeigen, in welchen Bereichen Laminatböden zufrieden stellend eingesetzt werden können sowie dazu den Verbraucher in die Lage zu versetzen, informiert eine Auswahl zu treffen. Sie legt ebenfalls Anforderungen an Kennzeichnung und Verpackung fest.
Für Laminatböden werden die Anwendungsgebiete ‘Wohnen’ und ‘Gewerblich’ berücksichtigt. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind (wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen); sie gilt jedoch für Küchen im Wohnbereich.

Revêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai

La présente Norme européenne spécifie les caractéristiques, fixe les exigences et donne les méthodes d’essai pour les revêtements de sol stratifiés (tels que définis en 3.1).
Elle comporte un système de classification, basé sur l’EN 685, définissant des exigences pratiques pour les zones et niveaux d’utilisation, afin d’indiquer dans quels cas les revêtements de sol stratifiés fournissent un service satisfaisant et d’encourager le consommateur à faire un choix informé. Elle précise également les exigences relatives au marquage et à l’emballage.
Les revêtements de sol stratifiés sont destinés à un usage domestique et commercial. La présente norme ne précise pas les exigences relatives aux zones présentant des risques d’humidification fréquente comme les salles de bain, les buanderies ou les saunas ; en revanche, elle s’applique aux cuisines domestiques.

Laminatne talne obloge - Elementi z zunanjo plastjo na osnovi aminoplastičnih termostabilnih smol - Specifikacije, zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 07-Oct-2008
• Withdrawal Date: 08-Mar-2016
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134 - Resilient and textile floor coverings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 09-Mar-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST EN 13329:2006+A1:2009 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods

Relations

• Merged From: EN 13329:2006 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 13329:2016 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• Effective Date: 23-May-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QRSODVWLþQLKLaminatböden - Elemente mit einer Deckschicht auf Basis aminoplastischer, wärmehärtbarer Harze - Spezifikationen, Anforderungen und PrüfverfahrenRevêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essaiLaminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 13329:2006+A1:2008SIST EN 13329:2006+A1:2009en,fr,de01-april-2009SIST EN 13329:2006+A1:2009SLOVENSKI
STANDARD



SIST EN 13329:2006+A1:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13329:2006+A1
October 2008 ICS 97.150 Supersedes EN 13329:2006English Version
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
Revêtements de sol stratifiés -Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
Laminatböden - Elemente mit einer Deckschicht auf Basis aminoplastischer, wärmehärtbarer Harze -Spezifikationen, Anforderungen und Prüfverfahren This European Standard was approved by CEN on 3 April 2006 and includes Amendment 1 approved by CEN on 11 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13329:2006+A1:2008: ESIST EN 13329:2006+A1:2009



EN 13329:2006+A1:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements.6 5 Marking and packaging.9 6 Test report.10 Annex A (normative)
Determination of thickness, length, width, squareness, straightness and flatness.11 Annex B (normative)
Determination of openings and height difference between elements.18 Annex C (normative)
Determination of dimensional variations after changes in relative humidity.20 Annex D (normative)
Determination of surface soundness.22 Annex E (normative)
Determination of abrasion resistance and abrasion classification.24 Annex F (normative)
Determination of impact resistance and impact classification.29 Annex G (normative)
Determination of thickness swelling.31 Annex H (informative)
Calibration and maintenance of abrasion equipment.
...