prEN 4317

Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Non heat treated - Forging stock - a or D ≤ 200 mm

This document specifies the requirements relating to:
Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980)
Not heat treated
Forging stock
a or D ≤ 200 mm
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrTiMoV26-15 (1.4980) - Nicht wärmebehandelt - Schmiedevormaterial - a oder D ≤ 200 mm

No Scope available

Série aérospatiale - Alliage résistant à chaud X4NiCrTiMoV26-15 (1.4980) - Non traité thermiquement - Produits destinés à la forge - a ou D ≤ 200 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud X4NiCrTiMoV26-15 (1.4980)
Non traité thermiquement
Produits destinés à la forge
a ou D ≤ 200 mm
pour les applications aérospatiales.
W.nr : 1.4980.
Désignation ASD-STAN : FE-PA2601.

Aeronavtika - Toplotno odporna zlitina X4NiCrTiMoV26-15 (1.4980) - Toplotno neobdelana - Material za kovanje - a ali D ≤ 200 mm

General Information

• Status: Not Published
• Publication Date: 01-Dec-2025
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 29-Aug-2024
• Completion Date: 29-Aug-2024
• Ref Project: oSIST prEN 4317:2024 - Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Non heat treated - Forging stock - a or D ≤ 200 mm

Relations

• Revises: EN 4317:2007 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 200 mm
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN 4317:2007
Aeronavtika - Toplotno odporna zlitina X4NiCrTiMoV26-15 (1.4980) - Toplotno
neobdelana - Material za kovanje - a ali D ≤ 200 mm
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Non heat treated -
Forging stock - a or D ≤ 200 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrTiMoV26-15 (1.4980) - Nicht
wärmebehandelt - Schmiedevormaterial - a oder D ≤ 200 mm
Série aérospatiale - Alliage résistant à chaud X4NiCrTiMoV26-15 (1.4980) - Non traité
thermiquement - Produits destinés à la forge - a ou D ≤ 200 mm
Ta slovenski standard je istoveten z: prEN 4317
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.05 Will supersede EN 4317:2007
English Version
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15
(1.4980) - Non heat treated - Forging stock - a or D ≤
200 mm
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X4NiCrTiMoV26-15 (1.4980) - Non traité X4NiCrTiMoV26-15 (1.4980) - Nicht wärmebehandelt -
thermiquement - Produits destinés à la forge - a ou D ≤ Schmiedevormaterial - a oder D ≤ 200 mm
200 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4317:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (prEN 4317:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4317:2007.
prEN
...