EN 3712:2007

Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

This standard specifies characteristics for one lug, reduced series, counterbored, fixed anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, in steel, cadmium plated, MoS2 lubricated, classification 1 100 MPa  ) / 235 °C.  )

Luft-und Raumfahrt - Annietmuttern, selbstsichernd, einseitiger verkürzter Flansch, mit zylindrischer Aussenkung, aus Stahl, verkadmet, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C

Diese Norm legt Eigenschaften für MoS2-geschmierte Annietmuttern aus verkadmetem Stahl mit verkürztem einseitigem Flansch, zylindrischer Aussenkung und einer selbstsichernden Eigenschaft, erzielt durch unrunde Verformung des Oberteils in der Klasse: 1 100 MPa )/235 °C ), fest.

Série aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série reduite, avec chambrage, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C

Aeronavtika - Zakovne matice, samovarovalne, enostranske, iz jekla, prevlečene s kadmijem, namazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °C

General Information

• Status: Published
• Publication Date: 19-Jun-2007
• Withdrawal Date: 30-Dec-2007
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Due Date: 30-Jun-2017
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3712:2009 - Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ƒ&Luft-und Raumfahrt - Annietmuttern, selbstsichernd, einseitiger verkürzter Flansch, mit zylindrischer Aussenkung, aus Stahl, verkadmet, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °CSérie aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série reduite, avec chambrage, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °CAerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 3712:2007SIST EN 3712:2009en,de01-julij-2009SIST EN 3712:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3712
June 2007 ICS 49.030.30 English Version
Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
Série aérospatiale - Écrous à river, à freinage interne, fixes, simple patte, série reduite, avec chambrage, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C
Luft-und Raumfahrt - Annietmuttern, selbstsichernd, einseitiger verkürzter Flansch, mit zylindrischer Aussenkung, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C This European Standard was approved by CEN on 20 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3712:2007: ESIST EN 3712:2009
...