EN ISO 12867:2010
(Main)Ophthalmic instruments - Trial frames (ISO 12867:2010)
Ophthalmic instruments - Trial frames (ISO 12867:2010)
ISO 12867:2010, together with ISO 15004‑1, specifies minimum requirements and test methods for trial frames for holding trial case lenses, complying with ISO 9801, in front of a subject's eyes in order to assess visual acuity and facilitate optical correction of vision.
ISO 12867:2010 is applicable to lens holders mounted on headbands, bracket-mounted frames and frames mounted in the manner of spectacles with supports on the ears and the bridge of the nose. It is applicable to all types of trial frame, including half-eye and rotating lens holders.
ISO 12867:2010 takes precedence over ISO 15004‑1, if differences exist.
Ophthalmische Instrumente - Refraktionsbrillen (ISO 12867:2010)
Diese Internationale Norm legt zusammen mit ISO 15004 1 Mindestanforderungen und Prüfverfahren für Refraktionsbrillen fest, mit denen Refraktionsgläser nach ISO 9801 vor die Augen einer Testperson gehalten werden, um die Sehschärfe zu bestimmen und eine optische Korrektion des Sehens zu ermöglichen.
Diese Internationale Norm gilt auch für Glashalter an Kopfbändern, Brillen an Wandarmen und Brillen in der Art von Korrektionsbrillen mit Auflagen an den Ohren und am Nasensattel. Sie gilt für alle Typen von Refraktionsbrillen, einschließlich Halbrand- und drehbaren Glashaltern.
Diese Internationale Norm gilt nicht für Phoropter (nach ISO 10341).
Wenn Unterschiede vorliegen, hat diese Internationale Norm Vorrang vor ISO 15004 1.
Instruments ophtalmiques - Montures d'essai (ISO 12867:2010)
L'ISO 12867:2010 spécifie, conjointement à l'ISO 15004-1, les exigences minimales et les méthodes d'essai relatives aux montures d'essai destinées à supporter les verres de boîte d'essai conformes à l'ISO 9801 placés devant les yeux du patient afin d'évaluer les performances visuelles et de faciliter la correction optique de la vue.
L'ISO 12867:2010 s'applique aux supports de verres montés sur serre-tête, ainsi qu'aux montures à potence et aux montures se présentant sous la forme de lunettes munies de supports auriculaires et d'un pont nasal. Elle s'applique également à tous les types de montures d'essai, y compris aux supports de verres demi-lunes et aux supports rotatifs de lentilles.
L'ISO 12867:2010 a la priorité sur l'ISO 15004-1, lorsque des différences existent.
Oftalmični instrumenti - Poskusni okviri (ISO 12867:2010)
Ta mednarodni standard skupaj z ISO 15004-1 določa minimalne zahteve in preskusne metode za poskusne okvire, ki držijo poskusne leče, ki so v skladu z ISO 9801, pred posameznikovimi očmi za ocenjevanje ostrine vida in omogočanje optičnega popravila vida. Ta mednarodni standard velja za držala za leče, nameščena na naglavnih trakovih, okvire na nosilcih in okvire, ki so nameščeni kot očala z oporo za ušesi in mostičkom na nosu. Velja za vse vrste poskusnih okvirov, vključno z držali za leče za pol očesa in vrtljivimi držali za leče. Ta mednarodni standard ne velja za glave refraktorjev (glej ISO 10341). Ta mednarodni standard ima prednost pred ISO 15004-1, če so med njima razlike.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST EN ISO 12867:2000
2IWDOPLþQLLQVWUXPHQWL3RVNXVQLRNYLUL ,62
Ophthalmic instruments - Trial frames (ISO 12867:2010)
Ophthalmische Instrumente - Refraktionsbrillen (ISO 12867:2010)
Instruments ophtalmiques - Montures d'essai (ISO 12867:2010)
Ta slovenski standard je istoveten z: EN ISO 12867:2010
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12867
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2010
ICS 11.040.70 Supersedes EN ISO 12867:1998
English Version
Ophthalmic instruments - Trial frames (ISO 12867:2010)
Instruments ophtalmiques - Montures d'essai (ISO Ophthalmische Instrumente - Refraktionsbrillen (ISO
12867:2010) 12867:2010)
This European Standard was approved by CEN on 29 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12867:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 12867:2010) has been prepared by Technical Committee ISO/TC 172 “Optics and
photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn
at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12867:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12867:2010 has been approved by CEN as a EN ISO 12867:2010 without any modification.
INTERNATIONAL ISO
STANDARD 12867
Second edition
2010-06-01
Ophthalmic instruments — Trial frames
Instruments ophtalmiques — Montures d'essai
Reference number
ISO 12867:2010(E)
©
ISO 2010
ISO 12867:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 12867:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12867 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This second edition cancels and replaces the first edition (ISO 12867:1998), which has undergone minor
revision to update the normative references.
INTERNATIONAL STANDARD ISO 12867:2010(E)
Ophthalmic instruments — Trial frames
1 Scope
This International Standard, together with ISO 15004-1, specifies minimum requirements and test methods for
trial frames for holding trial case lenses, complying with ISO 9801, in front of a subject's eyes in order to
assess visual acuity and facilitate optical correction of vision.
This International Standard is applicable to lens holders mounted on headbands, bracket-mounted frames and
frames mounted in the manner of spectacles with supports on the ears and the bridge of the nose. It is
applicable to all types of trial frame, including half-eye and rotating lens holders.
This International Standard is not applicable to refractor heads (see ISO 10341).
This International Standard takes precedence over ISO 15004-1, if differences exist.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 8429, Optics and optical instruments — Ophthalmology — Gra
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.