EN ISO 3164:2008
(Main)Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)
Specifies the deflection-limiting volume (DLV) to be used when performing laboratory evaluations of protective structures which provide protection to operators of earth-moving machinery.
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich (ISO 3164:1995)
Diese Internationale Norm legt den Verformungsgrenzbereich (DLV) fest, der bei der Prüfung von Aufbauten zum Schutz des Maschinenführers von Erdbaumaschinen zur Anwendung kommt.
Engins de terrassement - Étude en laboratoire des structures de protection - Spécifications pour le volume limite de déformation (ISO 3164:1995)
La présente Norme internationale prescrit le volume limite de déformation (DLV) à utiliser lors d'études en laboratoire des structures destinées à protéger l'opérateur d'un engin de terrassement.
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje deformacije (ISO 3164:1995)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3164:2008
01-november-2008
1DGRPHãþD
SIST EN ISO 3164:2000
6WURML]D]HPHOMVNDGHOD/DERUDWRULMVNRRYUHGQRWHQMH]DãþLWH0HMQRSRGURþMH
GHIRUPDFLMH ,62
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume (ISO 3164:1995)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich (ISO
3164:1995)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation (ISO 3164:1995)
Ta slovenski standard je istoveten z: EN ISO 3164:2008
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3164:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3164:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 3164:2008
EUROPEAN STANDARD
EN ISO 3164
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 53.100 Supersedes EN ISO 3164:1999
English Version
Earth-moving machinery - Laboratory evaluations of protective
structures - Specifications for deflection-limiting volume (ISO
3164:1995)
Engins de terrassement - Étude en laboratoire des Erdbaumaschinen - Prüfung von Schutzaufbauten -
structures de protection - Spécifications pour le volume Verformungsgrenzbereich (ISO 3164:1995)
limite de déformation (ISO 3164:1995)
This European Standard was approved by CEN on 25 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3164:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3164:2008
EN ISO 3164:2008 (E)
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3164:2008
EN ISO 3164:2008 (E)
Foreword
The text of ISO 3164:1995 has been prepared by Technical Committee ISO/TC 127 “Earth-moving machinery”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO 3164:2008 by
Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3164:1999.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.