EN 4162:2009

Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C

This European Standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated.
Classification: 1 100 MPa / 235 °C.

Luft- und Raumfahrt - 100° Senkschrauben mit Flügelkreuzschlitz, mittlere Gewindelänge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemperatur)/235 °C

Diese Norm legt die Eigenschaften von 100° Senkschrauben mit Flügelkreuzschlitz und mittlerer Gewinde-länge, aus legiertem Stahl, verkadmet, fest.
Klasse: 1 100 MPa/235 °C

Série aérospatiale - Vis à tête fraisée 100° normale; à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - 1 100 MPa (à température ambiante) / 235 °C

Aeronavtika - Vijaki, 100° ugrezna glava, križna zareza, polno steblo, ozka toleranca, srednja navojna dolžina, iz legiranega jekla, kadmirani - 1100 MPa (pri temperaturi okolice)/235 °C

Ta evropski standard opredeljuje značilnosti vijakov s  100° ugrezno glavo, križno zarezo, polnim steblom, ozko toleranco, srednje navojne dolžine iz legiranega jekla in kadmiranih. Klasifikacija: 1.100 MPa / 235°C.

General Information

• Status: Withdrawn
• Publication Date: 10-Nov-2009
• Withdrawal Date: 22-Mar-2016
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4162:2010 - Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1100 MPa (at ambient temperature)/235 °C

Relations

• Replaced By: EN 4162:2016 - Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• Effective Date: 30-Mar-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Vijaki, 100° ugrezna glava, križna zareza, polno steblo, ozka toleranca, srednja navojna dolžina, iz legiranega jekla, kadmirani - 1100 MPa (pri temperaturi okolice)/235 °CLuft- und Raumfahrt - 100°
Senkschrauben mit Flügelkreuzschlitz, mittlere Gewindelänge, aus legiertem Stahl, verkadmet - 1100 MPa (bei Raumtemperatur)/235 °CSérie aérospatiale - Vis à tête fraisée 100° normale; à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - 1100 MPa (à température ambiante)/235 °CAerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1100 MPa (at ambient temperature)/235 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 4162:2009SIST EN 4162:2010en01-januar-2010SIST EN 4162:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4162
November 2009 ICS 49.030.20 English Version
Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C
Série aérospatiale - Vis à tête fraisée 100° normale; à empreinte cruciforme déportée, tige normale à tolérance large, filetage moyen, en acier allié, cadmiées - 1 100 MPa (à température ambiante) / 235 °C
Luft- und Raumfahrt - 100°
Senkschrauben mit Flügelkreuzschlitz, mittlere Gewindelänge, aus legiertem Stahl, verkadmet - 1 100 MPa (bei Raumtemperatur) / 235 °C This European Standard was approved by CEN on 15 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4162:2009: ESIST EN 4162:2010
...