EN ISO 16047:2005
(Main)Fasteners - Torque/clamp force testing (ISO 16047:2005)
Fasteners - Torque/clamp force testing (ISO 16047:2005)
ISO 16047:2005 specifies the conditions for carrying out torque/clamp force tests on threaded fasteners and related parts. It is applicable, basically, to bolts, screws, studs and nuts made of carbon steel and alloy steel, whose mechanical properties are specified in ISO 898-1, ISO 898-2 or ISO 898-6, having ISO metric threads with thread sizes M3 to M39. It is also applicable to the combination of other externally and internally threaded fasteners with a triangular ISO thread according to ISO 68. It is not applicable to set screws and similar threaded fasteners that are not under tensile stresses, nor to screws which form their own mating thread or threaded fasteners having additional self-locking features.
Verbindungselemente - Drehmoment/Vorspannkraft-Versuch (ISO 16047:2005)
Diese Internationale Norm legt die Bedingungen zur Durchführung von Drehmoment/Vorspannkraft-Versuchen für mechanische Verbindungselemente mit Gewinde und ähnliche Teile fest.
Sie ist grundsätzlich für Schrauben und Muttern mit metrischem Gewinde der Abmessung M3 bis M39 aus Kohlenstoffstahl und legiertem Stahl anwendbar, deren mechanische Eigenschaften in den Normen ISO 898-1, ISO 898-2 oder ISO 898-6 festgelegt sind. Sie ist auch anwendbar für Kombinationen anderer Verbindungselemente mit Außen- und Innengewinde nach ISO 68-1.
Sie ist nicht für Gewindestifte und ähnliche Teile, die keiner Zugspannung ausgesetzt sind, für gewindeformende Schrauben und für selbstsichernde Verbindungselemente anwendbar.
Wenn nichts anderes vereinbart, sind die Versuche bei Raumtemperatur auszuführen. Versuche unter festgelegten Bedingungen sind jedoch in einem Temperaturbereich von 10 °C bis 35 °C durchzuführen.
Dieses Verfahren erlaubt die Bestimmung der Anzieheigenschaften von mechanischen Verbindungselementen mit Gewinde und ähnlichen Teilen.
.
Eléments de fixation - Essais couple/tension (ISO 16047:2005)
L'ISO 16047:2005 spécifie les essais couple/tension réalisés sur des éléments de fixation filetés et autres pièces similaires.
L'ISO 16047:2005 s'applique principalement aux vis, goujons et écrous en acier au carbone ou en acier allié, de filetage M3 à M39 et de caractéristiques mécaniques conformes à l'ISO 898-1, à l'ISO 898-2 ou à l'ISO 898-6. Elle est également applicable à d'autres éléments de fixation à filetage intérieur ou extérieur, à filets triangulaires ISO conformes à l'ISO 68-1.
Cependant, l'ISO 16047:2005 ne s'applique pas aux vis sans tête et autres éléments de fixation filetés similaires non soumis à des contraintes de traction, aux vis qui forment leur propre taraudage et aux éléments de fixation filetés comportant des éléments additionnels d'autofreinage.
Vezni elementi – Preskus torzijskega momenta/prednapetosti (ISO 16047:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16047:2005
01-maj-2005
Vezni elementi – Preskus torzijskega momenta/prednapetosti (ISO 16047:2005)
Fasteners - Torque/clamp force testing (ISO 16047:2005)
Verbindungselemente - Drehmoment/Vorspannkraft-Versuch (ISO 16047:2005)
Eléments de fixation - Essais couple/tension (ISO 16047:2005)
Ta slovenski standard je istoveten z: EN ISO 16047:2005
ICS:
21.060.01 Vezni elementi na splošno Fasteners in general
SIST EN ISO 16047:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16047:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 16047:2005
EUROPEAN STANDARD
EN ISO 16047
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 21.060.01
English version
Fasteners - Torque/clamp force testing (ISO 16047:2005)
Eléments de fixation - Essais couple/tension (ISO Verbindungselemente - Drehmoment/Vorspannkraft-
16047:2005) Versuch (ISO 16047:2005)
This European Standard was approved by CEN on 17 January 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16047:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16047:2005
EN ISO 16047:2005 (E)
Foreword
This document (EN ISO 16047:2005) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2005, and conflicting national
standards shall be withdrawn at the latest by August 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 16047:2005 has been approved by CEN as EN ISO 16047:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16047:2005
INTERNATIONAL ISO
STANDARD 16047
First edition
2005-02-01
Fasteners — Torque/clamp force testing
Éléments de fixation — Essais couple/tension
Reference number
ISO 16047:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 16047:2005
ISO 16047:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.