EN 4652-320:2017

Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard

This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial straight plugs  50 ohms. The cable to connector assembly is a crimp technology.

Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 320: Typ 3, N-Schnittstelle, Crimpverbindung, freier Steckverbinder, gerade - Produktnorm

Diese Europäische Norm legt die Eigenschaften von koaxialen, geraden, freien Steckverbindern, 50 Ohm, mit Schraubkupplung (N-Schnittstelle) fest. Der Anschluss des Steckverbinders an die Leitung erfolgt über eine Crimpverbindung.

Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 320 : Type 3, interface N - Version à sertir - Fiche droite - Norme de produit

Aeronavtika - Konektorji, koaksialni, radiofrekvenčni - 320. del: Tip 3, vmesnik N - Izvedba s stisljivimi priključki - Ravni vtič - Standard za proizvod

Ta evropski standard določa lastnosti koaksialnih ravnih vtičev z vijačnim spojem (vmesnik N) – 50 ohmov. Sklop kabla in konektorja je tehnologija izvedbe s stisljivimi priključki.

General Information

• Status: Published
• Publication Date: 14-Nov-2017
• Withdrawal Date: 30-May-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Nov-2017
• Completion Date: 15-Nov-2017
• Ref Project: SIST EN 4652-320:2018 - Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGLuft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 320: Typ 3, N-Schnittstelle, Crimpverbindung, freier Steckverbinder, gerade - ProduktnormSérie aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 320 : Type 3, interface N - Version à sertir - Fiche droite - Norme de produitAerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4652-320:2017SIST EN 4652-320:2018en,fr,de01-februar-2018SIST EN 4652-320:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-320
November
t r s y ICS
v {ä r x r English Version
Aerospace series æ Connectorsá coaxialá radio frequency æ Part
u t rã Type
uá N interface æ Crimp version æ Straight plug æ Product standard Série aérospatiale æ Connecteurs coaxiaux pour radio fréquences æ Partie
u t r ã Type
uá interface N æ Version à sertir æ Fiche droite æ Norme de produit
Luftæ und Raumfahrt æ Koaxiale HochfrequenzæSteckverbinder æ Teil
u t rã Typ
uá NæSchnittstelleá Crimpverbindungá freier Steckverbinderá gerade æ Produktnorm This European Standard was approved by CEN on
s z September
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x w tæ u t rã t r s y ESIST EN 4652-320:2018

EN 2424, Aerospace series — Marking of aerospace products EN 2591∗, Aerospace series — Elements of electrical and optical connection — Test methods 1) EN 2812, Aerospace series — Stripping of electric cables EN 4652-001, Aerospace series — Connectors, coaxial, radio frequency — Part 001: Technical specification EN 4652-002, Aerospace series — Connectors, coaxial, radio frequency — Part 002: Specification of performances
EN 4652-322, Aerospace series — Connectors, coaxial, radio frequency — Part 322: Type 3, N interface — Crimp version — Square flange receptacle — Product standard
EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products TR 6058, Aerospace series — Cable code identification list 2) 3 Required characteristics  The connection technology shall comply to all required tests described in Clause 4.  All interface shall comply to EN 4652-001.  Holes for lockwire shall exist in case of no self-locking device on the product.  Water ingress resistance is required in mated conditions for all cable groups.  Water ingress resistance is required in unmated conditions for cable group A.
∗ All parts quoted in this European Standard. 1) Published as ASD-STAN Prestandard at the date of publication of this European Standard. (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this European Standard. (www.asd-stan.org). SIST EN 4652-320:2018

Key 1 Prospective cap 2 Marking axis 3 Straight knurl 4 Hex 18,9 / Flats Figure 1 — Nut type G Dimensions in millimetres
Key 1 Prospective cap 2 Marking axis 3 Straight knurl a Center contact Figure 2 — Nut type H and connector dimensions SIST EN 4652-320:2018

Nut type: H
Key 1 3 holes diameter 1° to 120° 2 Hex 12/2 flats 3 2 holes diameter 0,75 Marking: see Clause 8. Figure 3 — Type G and H over view Table 1 — N straight plug dimensions and mass Cable code (see TR 6058) Cable group Nut
type A
max. B
max. ØC
ØD ØE ØF Mass g WM C G 47 37,5 11,45 4,2 1,15 3 41,68 WD E H 50 41,5 13,95 8,4 2,5 6,3 45,02 WN F H 50 41,5 13,95 8,4 2,5 6,3 45,02
3.2 Materi
...