Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings

This document specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form.
This document includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN ISO 10874). It also specifies requirements for marking.

Elastische Bodenbeläge - Spezifikation für homogene und heterogene ebene Elastomer-Bodenbeläge

Dieses Dokument legt die Eigenschaften von homogenen und heterogenen ebenen (einschließlich genarbten oder geprägten) Elastomer-Bodenbelägen fest, die als Rollenware oder in Plattenform geliefert werden.
Dieses Dokument enthält ein Klassifizierungssystem auf der Grundlage der Nutzungsintensität, das zeigt, wo diese Bodenbeläge einen zufriedenstellenden Nutzen bieten (siehe EN ISO 10874). Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc lisse

Le présent document spécifie les caractéristiques des revêtements de sol homogènes et hétérogènes en caoutchouc lisse (y compris ceux à surfaces grainées) fournis sous forme de dalles ou de rouleaux.
Le présent document inclut un système de classification basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol rendent un service satisfaisant (voir l’EN ISO 10874). Il spécifie également des exigences de marquage.

Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih gumenih talnih oblog

General Information

Status
Published
Publication Date
28-Apr-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-Apr-2020
Due Date
14-Mar-2021
Completion Date
29-Apr-2020

Relations

Buy Standard

Standard
EN 1817:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1817:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1817:2020
01-julij-2020
Nadomešča:
SIST EN 1817:2010
Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih
gumenih talnih oblog
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth
rubber floor coverings
Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-
Bodenbeläge
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et
hétérogènes en caoutchouc lisse
Ta slovenski standard je istoveten z: EN 1817:2020
ICS:
97.150 Talne obloge Floor coverings
SIST EN 1817:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1817:2020

---------------------- Page: 2 ----------------------
SIST EN 1817:2020


EN 1817
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 1817:2010
English Version

Resilient floor coverings - Specification for homogeneous
and heterogeneous smooth rubber floor coverings
Revêtements de sol résilients - Spécifications des Elastische Bodenbeläge - Spezifikation für homogene
revêtements de sol homogènes et hétérogènes en und heterogene ebene Elastomer-Bodenbeläge
caoutchouc lisse
This European Standard was approved by CEN on 14 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1817:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1817:2020
EN 1817:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 General requirements . 5
5 Classification requirements . 6
6 Marking . 8
Annex A (informative) Optional properties . 9
Bibliography . 10

2

---------------------- Page: 4 ----------------------
SIST EN 1817:2020
EN 1817:2020 (E)
European foreword
This document (EN 1817:2020) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of
...

SLOVENSKI STANDARD
oSIST prEN 1817:2019
01-julij-2019
Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih
gumenih talnih oblog
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth
rubber floor coverings
Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-
Bodenbeläge
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et
hétérogènes en caoutchouc lisse
Ta slovenski standard je istoveten z: prEN 1817
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 1817:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1817:2019

---------------------- Page: 2 ----------------------
oSIST prEN 1817:2019


DRAFT
EUROPEAN STANDARD
prEN 1817
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2019
ICS 97.150 Will supersede EN 1817:2010
English Version

Resilient floor coverings - Specification for homogeneous
and heterogeneous smooth rubber floor coverings
Revêtements de sol résilients - Spécifications des
revêtements de sol homogènes et hétérogènes en
caoutchouc lisse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1817:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1817:2019
prEN 1817:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 5
5 Classification requirements . 6
6 Marking . 7
Annex A (informative) Optional properties . 8
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 1817:2019
prEN 1817:2019 (E)
European foreword
This document (prEN 1817:2019) has been prepared by Technical Committee CEN/TC 134 Resilient,
textile and laminate coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.