Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings

This European Standard specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form.
This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-Bodenbeläge

Dieses Dokument legt die Eigenschaften von homogenen und heterogenen ebenen (einschließlich genarbten oder geprägten) Elastomer-Bodenbelägen fest, die als Rollenware oder in Plattenform geliefert werden.
Dieses Dokument enthält ein Klassifizierungssystem auf der Grundlage der Nutzungsintensität, das zeigt, wo diese Bodenbeläge einen zufriedenstellenden Nutzen bieten (siehe EN ISO 10874). Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc lisse

Le présent document spécifie les caractéristiques des revêtements de sol homogènes et hétérogènes en caoutchouc lisse (y compris ceux à surfaces grainées) fournis sous forme de dalles ou de rouleaux.
Le présent document inclut un système de classification basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol rendent un service satisfaisant (voir l’EN ISO 10874). Il spécifie également des exigences de marquage.

Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih gumenih talnih oblog

General Information

Status
Published
Public Enquiry End Date
01-Aug-2019
Publication Date
14-May-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-May-2020
Due Date
17-Jul-2020
Completion Date
15-May-2020

RELATIONS

Buy Standard

Standard
SIST EN 1817:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 1817:2020
01-julij-2020
Nadomešča:
SIST EN 1817:2010
Netekstilne talne obloge - Specifikacija homogenih in heterogenih gladkih
gumenih talnih oblog

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth

rubber floor coverings
Elastische Bodenbeläge - Spezifikation für homogene und heterogene Elastomer-
Bodenbeläge

Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et

hétérogènes en caoutchouc lisse
Ta slovenski standard je istoveten z: EN 1817:2020
ICS:
97.150 Talne obloge Floor coverings
SIST EN 1817:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1817:2020
---------------------- Page: 2 ----------------------
SIST EN 1817:2020
EN 1817
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 1817:2010
English Version
Resilient floor coverings - Specification for homogeneous
and heterogeneous smooth rubber floor coverings

Revêtements de sol résilients - Spécifications des Elastische Bodenbeläge - Spezifikation für homogene

revêtements de sol homogènes et hétérogènes en und heterogene ebene Elastomer-Bodenbeläge

caoutchouc lisse
This European Standard was approved by CEN on 14 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1817:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1817:2020
EN 1817:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 5

4 General requirements ................................................................................................................................... 5

5 Classification requirements ........................................................................................................................ 6

6 Marking .............................................................................................................................................................. 8

Annex A (informative) Optional properties ......................................................................................................... 9

Bibliography ................................................................................................................................................................. 10

---------------------- Page: 4 ----------------------
SIST EN 1817:2020
EN 1817:2020 (E)
European foreword

This document (EN 1817:2020) has been prepared by Technical Committee CEN/TC 134 “Resilient,

textile and laminate coverings”, the secretariat of which is held by NBN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall

be withdrawn at the latest by October 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 1817:2010.

In comparison with the previous edition, the following technical modifications have been made:

— updated references to standards in Table 1, Table 2 and Annex A.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 1817:2020
EN 1817:2020 (E)
1 Scope

This document specifies the characteristics of homogeneous and heterogeneous smooth (including

grained or embossed) rubber floor coverings, supplied in either tile or roll form.

This document includes a classification system based on intensity of use, which shows where these

resilient floor coverings should give satisfactory service (see EN ISO 10874). It also specifies

requirements for marking.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 425, Resilient and laminate floor coverings — Castor chair test
EN 12466, Resilient floor coverings — Vocabulary

EN ISO 105-B02:2014, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light:

Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874, Resilient, textile and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.