EN 15651-4:2010
(Main)Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
This document specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use.
Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses.
NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5.
Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals are excluded.
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für Fußgängerwege
Dieses Dokument legt Definitionen und Anforderungen an kalt verarbeitbare, nicht tragende elastische Dichtstoffe fest, die im Hochbau, sowohl in Gebäuden als auch im Außenbereich, für Bewegungsfugen in Böden verwendet werden.
Anwendungsbereiche sind: für Fußgängerwege und öffentliche Bereiche ausgelegte Bodenfugen, Bewe-gungsfugen zwischen Betonplatten, Bereiche mit Lasten durch Fußgänger, durch Gepäckwagen/Kofferkulis belastete Bereiche, begehbare Böden, Balkone, Terrassen, Kaufhäuser.
ANMERKUNG Festlegungen zur Bewertung der Konformität (d. h. zur Erstprüfung sowie zur werkseigenen Produk¬tionskontrolle) und zur Kennzeichnung dieser Produkte werden in EN 15651 5 angegeben.
Chemische Sicherheitsbereiche, kalt verarbeitbare Fugendichtstoffe für Betonfahrbahnen von Straßen, Flug-plätzen und Kläranlagen sowie Umfangsabdichtungen sind ausgeschlossen.
Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 4: Mastics pour chemins piétonniers
La présente Norme européenne spécifie les définitions et les exigences relatives aux mastics élastiques non structurels appliqués à froid utilisés pour réaliser des joints dynamiques dans les planchers dans le domaine de la construction immobilière et prévus pour un usage intérieur ou extérieur.
Les domaines d’application sont les suivants : joints de planchers conçus pour les chemins piétonniers, lieux publics, joints dynamiques entre des dalles en béton, zones soumises à une charge piétonnière, zones où circulent des chariots, planchers à usage piétonnier, balcons, terrasses et entrepôts.
NOTE Les dispositions concernant l’évaluation de la conformité (à savoir l’essai de type initial et le contrôle de la production en usine) et le marquage de ces produits sont données dans l’EN 15651-5.
Sont exclus les applications pour réservoirs de produits chimiques, les joints appliqués à froid pour les dalles en béton routières, pour les terrains d’aviation et les stations d’épurations.
Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 4. del: Tesnilne mase za sprehajalne površine
Ta dokument opredeljuje definicije in zahteve za hladno nanešene nekonstrukcijske elastične tesnilne mase, ki se uporabljajo za dilatacijske fuge v tleh in gradbeništvu za notranjo in zunanjo uporabo. Področja uporabe so: talni stiki, zasnovani za sprehajalne površine, javne površine, dilatacijske fuge med betonskimi ploščami, območja z obtežbo pešcev, površine, kjer se uporabljajo vozički, tla, po katerih se hodi, balkoni, terase, skladišča.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 4. del: Tesnilne mase za sprehajalne površineFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für FußgängerwegeMastics pour joints dans la construction immobiliere - Définitions, exigences et évaluation de la conformité - Partie 4: Mastics pour chemins piétonniersSealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-4:2010SIST EN 15651-4:2010en,de01-maj-2010SIST EN 15651-4:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-4
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 4: Mastics pour chemins piétonniers
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 4: Fugendichtstoffe für Fußgängerwege This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-4:2010: ESIST EN 15651-4:2010
Example on the frequency of tests for factory production control . 15Annex B (normative)
Determination of the change of volume of self levelling cold applied joint sealants . 16B.1Principle . 16B.2Apparatus and materials . 16B.3Preparation of test specimens . 16B.4Test procedure . 16 SIST EN 15651-4:2010
for joints in building construction”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes an informative Annex A dealing with factory production control and a normative
Annex B dealing with the determination of the change of volume of self levelling cold applied joint sealants.
This document is one of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows: Part 1: Sealants for facade elements, Part 2: Sealants for glazing, Part 3: Sealants for sanitary joints, Part 4: Sealants for pedestrian walkways (this document), Part 5: Evaluation of conformity and marking. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses.
NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5. Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals are excluded. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products — Building products excluding floorings exposed to the thermal attack by a single burning item EN 14187-3, Cold applied joint sealants — Part 3: Test method for the determination of self-levelling properties EN 15651-5, Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 5: Evaluation of conformity and marking EN 26927:1990, Building construction — Jointing products — Sealants — Vocabulary (ISO 6927:1981) EN ISO 291, Plastics — Standard atmospheres for conditioning and testing (ISO 291:2008) EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 7389, Building construction — Jointing products — Determination of elastic recovery of sealants
(ISO 7389:2002) EN ISO 7390, Building construction — Jointing products — Determination of resistance to flow of sealants (ISO 7390:2003) EN ISO 8339, Building construction — Sealants — Determination of tensile properties (Extension to break) (ISO 8339:2005) SIST EN 15651-4:2010
(ISO 10563:2005) EN ISO 10590, Building construction — Sealants — Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 11358, Plastics — Thermographimetry (TG) of polymers — General principles (ISO 11358:1997) EN ISO 11431, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) EN ISO 11600:2003, Building construction — Jointing products — Classification and requirements for sealants (ISO 11600:2002) ISO 13640, Building construction — Jointing products — Specifications for test substrates 3 Terms and definitions For the purposes of this document, the following terms and definitions given in EN 26927:1990 and the following apply. 3.1 reactive sealant mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.2 cure irreversible transformation of a sealant from a liquid or paste like state into a hardened or rubber like solid state
3.3 uncured/wet state of a sealant prior to the above transformation 4 Requirements 4.1 Identification requirements 4.1.1 Short description of the sealant
The short description of the non-structural sealant for pedestrian walkways shall include brand name, type (general chemical family one or multi-component (e.g. one component Polyurethane sealant in different colours, etc.). The primer shall be stated for the substrate concerned, if relevant (name, chemical type, etc.). SIST EN 15651-4:2010
The test shall be carried out in accordance with EN ISO 11358 on the uncured or wet sealant, between 35 °C and 900 °C, temperature slope 10 °C/min, non-oxidative condition (e.g. nitrogen). A single sample shall be used for this test. A single specimen may be tested and there shall be no significant difference between the reference curve and derivative (profile). In the case of a multi-co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.