EN ISO 7494-2:2003
(Main)Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003)
Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003)
ISO 7494-2:2003 specifies requirements and test methods for the materials, design and construction of the water and air supply within dental units in order to ensure that the compressed water and air supplied via the dental unit are of appropriate quality. It includes provisions for the prevention of retraction of oral fluids into the water supply of the dental unit.
ISO 7494-2:2003 does not address prevention of contamination and/or proliferation of hazardous microorganisms (for example bacteria, viruses) in the dental unit.
Zahnheilkunde - Zahnärztliche Behandlungsgeräte - Teil 2: Wasser- und Luftversorgung (ISO 7494-2:2003)
1 Anwendungsbereich
In diesem Teil von ISO 7494 werden Anforderungen an und Prüfverfahren für das Material, die Gestaltung und die Konstruktion von Wasser- und Luftvorsorgungen innerhalb der zahnärztlichen Behandlungsgeräte festgelegt, um sicherzustellen, dass das von dem zahnärztlichen Behandlungsgerät abgegebene Wasser und die komprimierte Luft eine einwandfreie Qualität besitzen. Festgelegt sind Schutzmaßnahmen, um eine Rücksaugung der Mundhöhlenflüssigkeiten in die Wasserversorgung des Behandlungsgerätes zu verhindern.
Dieser Teil von ISO 7494 beschreibt nicht, wie eine Kontamination und/oder Ausbreitung von gefährlichen Mikroorganismen (z. B. Bakterien, Viren) in den zahnärztlichen Behandlungsgeräten verhindert werden kann
Art dentaire - Units dentaires - Partie 2: Alimentation en eau et en air (ISO 7494-2:2003)
L'ISO 7494-2:2004 spécifie les exigences et les méthodes d'essai applicables aux matériaux, à la conception et à la construction de l'alimentation en eau et en air de l'unit dentaire de manière que l'eau et l'air comprimé fournis par l'intermédiaire de l'unit soient de qualité appropriée. Elle comporte des dispositions relatives à la prévention de la rétraction des fluides buccaux dans l'alimentation en eau de l'unit dentaire.
L'ISO 7494-2:2004 ne traite ni de la prévention de toute contamination, ni de la prévention de prolifération de micro-organismes dangereux (par exemple bactéries, virus) dans l'unit dentaire.
Zobozdravstvo – Dentalne enote – Napajanje vode in zraka (ISO 7494-2:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2003
Zobozdravstvo – Dentalne enote – Napajanje vode in zraka (ISO 7494-2:2003)
Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003)
Zahnheilkunde - Zahnärztliche Behandlungsgeräte - Teil 2: Wasser- und Luftversorgung
(ISO 7494-2:2003)
Art dentaire - Units dentaires - Partie 2: Alimentation en eau et en air (ISO 7494-2:2003)
Ta slovenski standard je istoveten z: EN ISO 7494-2:2003
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 7494-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 11.060.20
English version
Dentistry - Dental units - Part 2: Water and air supply (ISO
7494-2:2003)
Art dentaire - Units dentaires - Partie 2: Alimentation en Zahnheilkunde - Zahnärztliche Behandlungsgeräte - Teil 2:
eau et en air (ISO 7494-2:2003) Wasser- und Luftversorgung (ISO 7494-2:2003)
This European Standard was approved by CEN on 7 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7494-2:2003 E
worldwide for CEN national Members.
CORRECTED 2003-06-25
Foreword
This document (EN ISO 7494-2:2003) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2003, and conflicting national
standards shall be withdrawn at the latest by September 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 7494-2:2003 has been approved by CEN as EN ISO 7494-2:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 7494 1996 Dental units EN ISO 7494 1997
ISO 11144 1995 Dental equipment – Connections for EN ISO 11144 1996
supply and waste lines
INTERNATIONAL ISO
STANDARD 7494-2
First edition
2003-03-01
Dentistry — Dental units —
Part 2:
Water and air supply
Art dentaire — Units dentaires —
Partie 2: Alimentation en eau et en air
Reference number
ISO 7494-2:2003(E)
©
ISO 2003
ISO 7494-2:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
ISO 7494-2:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Requirements for the water supply. 3
4.1 General. 3
4.2 Materials used for construction of procedural water systems within the dental unit . 3
4.3 Backflow prevention for systems using municipal water. 4
4.4 Cuspidor. 4
4.5 Water venturi . 5
4.6 Particle filter . 5
4.7 Bottled water system supplying incoming water or solution. 5
4.8 Retraction. 5
4.9 Water-disinfection systems . 5
5 Requirements for the air supply. 5
5.1 General. 5
5.2 Particle filters . 5
5.3 Antibacterial filters. 5
6 Tests. 6
6.1 Cuspidors. 6
6.2 Water venturi . 6
6.3 Systems using municipal water . 6
6.4 Bottled water system supplying procedural water or solution. 6
6.5 Retraction. 6
6.6 Particle filters . 6
6.7 Antibacterial air filters . 7
6.8 Water-disinfection systems . 7
7 Manufacturer's instructions and information for use . 7
Bibliography . 8
ISO 7494-2:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7494-2 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 6, Dental
equipment.
This first edition of ISO 7494-2, together with ISO 7494-1, cancels and replaces ISO 7494:1996, which has
been technically revised.
ISO 7494 consists of the following parts, under the general title Dentistry — Dental units:
Part 2: Water and air supply
The following part is under preparation:
Part 1: General requirements
iv © ISO 2003 — All rights reserved
ISO 7494-2:2003(E)
Introduction
The requirements for water and air supply of dental units have been discussed extensively in
TC 106/SC 6/WG 2, and it was concluded that the technical specifications for the water and air lines within
dental units are sufficiently defined while the microbiological side of the problem is not addressed.
The formulation of criteria in order to avoid or reduce biofilm on the surfaces in water and air lines was
considered difficult. Because the current technical state of the art does not provide an all-inclusive solution, no
agreement could be reached. Therefore it was agreed to publish first the general technical requirements for
the water and air lines as an International Standard. In the next step it is envisaged to find a solution for the
microbiological problems, including evaluation criteria for controlling or removing dental waterline biofilm.
INTERNATIONAL STANDARD ISO 7494-2:2003(E)
Dentistry — Dental units —
Part 2:
Water and air supply
1 Scope
This part of ISO 7494 specifies requirements and test methods for the materials, design and construction of
the water and air supply within dental units in order to ensure that the compressed water and air supplied via
the dental unit are of appropriate quality. It includes provisions for the prevention of retraction of oral fluids into
the water supply of the dental unit.
This part of ISO 7494 does not address prevention of contamination and/or proliferation of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.