EN ISO 15351:2010

Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)

This International Standard specifies a thermal conductimetric method after fusion under inert gas for the
determination of nitrogen in steel and iron.
The method is applicable to nitrogen contents between 0,002 % (m/m) and 0,6 % (m/m).

Stahl und Eisen - Bestimmung des Stickstoffgehaltes - Messung der Wärmeleitfähigkeit nach Aufschmelzen in strömendem Inertgas (Routineverfahren) (ISO 15351:1999)

Diese Internationale Norm legt ein Verfahren zur Bestimmung von Stickstoff in Stahl und Eisen fest, bei dem die Wärmeleitfähigkeit nach Aufschmelzen unter Inertgas gemessen wird.
Das Verfahren ist für Stickstoffanteile zwischen 0,002 % (mm) und 0,6 % (mm) anwendbar.

Aciers et fontes - Dosage de l'azote - Méthode par conductibilité thermique après fusion sous gaz inerte (Méthode pratique) (ISO 15351:1999)

La présente Norme internationale spécifie une méthode de dosage de l'azote dans les aciers et les fontes, par
conductibilité thermique après fusion sous gaz inerte.
La méthode est applicable aux aciers et fontes avec des fractions massiques d'azote comprises entre 0,002 % et
0,6 %.

Jeklo in železo - Določevanje dušika - Termična konduktometrska metoda po stalitvi v toku inertnega plina (rutinska metoda) (ISO 15351:1999)

Ta mednarodni standard opredeljuje termično konduktometrsko metodo po stalitvi v toku inertnega plina za določevanje dušika v jeklu in železu. Ta metoda se uporablja pri vsebnosti dušika med 0.002 in 0.6 % (m/m).

General Information

• Status: Published
• Publication Date: 20-Apr-2010
• Withdrawal Date: 30-Oct-2010
• ICS: 77.080.01 - Ferrous metals in general
• Technical Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Drafting Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Apr-2010
• Due Date: 20-Jun-2011
• Completion Date: 21-Apr-2010
• Ref Project: SIST EN ISO 15351:2010 - Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15351:2010
01-julij-2010
-HNORLQåHOH]R'RORþHYDQMHGXãLND7HUPLþQDNRQGXNWRPHWUVNDPHWRGDSR
VWDOLWYLYWRNXLQHUWQHJDSOLQDUXWLQVNDPHWRGD,62
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after
fusion in a current of inert gas (Routine method) (ISO 15351:1999)
Stahl und Eisen - Bestimmung des Stickstoffgehalts - Messung der Wärmeleitfähigkeit
nach Aufschmelzen in strömendem Inertgas (Routineverfahren) (ISO 15351:1999)
Aciers et fontes - Dosage de l'azote - Méthode par conductibilité thermique après fusion
sous gaz inerte (Méthode pratique) (ISO 15351:1999)
Ta slovenski standard je istoveten z: EN ISO 15351:2010
ICS:
77.080.01 Železne kovine na splošno Ferrous metals in general
SIST EN ISO 15351:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15351:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 15351:2010


EUROPEAN STANDARD
EN ISO 15351

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2010
ICS 77.080.01
English Version
Steel and iron - Determination of nitrogen content - Thermal
conductimetric method after fusion in a current of inert gas
(Routine method) (ISO 15351:1999)
Aciers et fontes - Dosage de l'azote - Méthode par Stahl und Eisen - Bestimmung des Stickstoffgehaltes -
conductibilité thermique après fusion sous gaz inerte Messung der Wärmeleitfähigkeit nach Aufschmelzen in
(Méthode pratique) (ISO 15351:1999) strömendem Inertgas (Routineverfahren) (ISO 15351:1999)
This European Standard was approved by CEN on 18 March 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15351:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15351:2010
EN ISO 15351:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15351:2010
EN ISO 15351:2010 (E)
Foreword
The text of ISO 15351:1999 has been prepared by Technical Committee ISO/TC 17 “Steel” of the International
Organization for Standardization (ISO) and has been taken over as EN ISO 15351:2010 by Technical
Committee ECISS/TC 102 “Methods of chemical analysis for iron and steel” the secretariat of which is held by
SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15351:1999 has been approved by CEN as a EN ISO 15351:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15351:2010

---------------------- Page: 6 --------
...