CEN ISO/TS 15530-3:2007

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004)

ISO/TS 15530-3:2004 provides an experimental technique for simplifying the uncertainty evaluation of CMM measurements, whose approach (substitution measurements) leads to measurements being carried out in the same way as actual measurements, but using calibrated workpieces of similar dimension and geometry instead of the unknown workpieces to be measured.

Geometrische Produktspezifikation (GPS) - Verfahren zur Ermittlung der Messunsicherheit von Koordinatenmessgeräten (KMG) - Teil 3: Anwendung von kalibrierten Werkstücken oder Normalen (ISO/TS 15530-3:2004)

Dieser Teil von ISO/TS 15530 legt die Ermittlung der Messunsicherheit für Ergebnisse von Messungen mit einem KMG unter Verwendung kalibrierter Werkstücke fest. Er bietet ein experimentelles Verfahren zur Vereinfachung der Unsicherheitsermittlung für Messungen mit KMG, dessen Ansatz (Substitutionsmessungen) dazu führt, dass Messungen in derselben Weise vorgenommen werden wie die eigentlichen Messungen, aber mit kalibrierten Werkstücken ähnlicher Abmessungen und Form anstelle der unbekannten zu messenden Werkstücke.
Messungen ohne Substitution auf KMG werden ebenfalls behandelt, sowie auch die Anforderungen des Verfahrens der Unsicherheitsermittlung, die benötigten Hilfsmittel, die Bestätigungsprüfung und die Zwischen¬prüfung der Messunsicherheit.
ANMERKUNG   Die Ermittlung der Messunsicherheit bezieht sich immer auf eine bestimmte Messaufgabe.

Spécification géométrique des produits (GPS) - Machines à mesurer tridimentionnelles (MMT): Technique pour la détermination de l'incertitude de mesure - Partie 3: Utilisation de pièces étalonnées ou des normes (ISO/TS 15530-3:2004)

Specifikacija geometrijskih veličin izdelka - Koordinatni merilni stroji (CMM): postopek določevanja negotovosti meritev - 3. del: Uporaba kalibriranih izdelkov ali standardov (ISO/TS 15530-3:2004)

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2007
• Withdrawal Date: 14-Oct-2011
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Oct-2011
• Completion Date: 15-Oct-2011
• Ref Project: SIST-TS CEN ISO/TS 15530-3:2008 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004)

Relations

• Replaced By: EN ISO 15530-3:2011 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
• Effective Date: 24-Oct-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 15530-3:2008
01-april-2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND.RRUGLQDWQLPHULOQLVWURML&00
SRVWRSHNGRORþHYDQMDQHJRWRYRVWLPHULWHYGHO8SRUDEDNDOLEULUDQLKL]GHONRY
DOLVWDQGDUGRY,6276
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM):
Technique for determining the uncertainty of measurement - Part 3: Use of calibrated
workpieces or standards (ISO/TS 15530-3:2004)
Geometrische Produktspezifikation (GPS) - Verfahren zur Ermittlung der
Messunsicherheit von Koordinatenmessgeräten (KMG) - Teil 3: Anwendung von
kalibrierten Werkstücken oder Normalen (ISO/TS 15530-3:2004)
Spécification géométrique des produits (GPS) - Machines a mesurer tridimentionnelles
(MMT): Technique pour la détermination de l'incertitude de mesure - Partie 3: Utilisation
de pieces étalonnées ou des normes (ISO/TS 15530-3:2004)
Ta slovenski standard je istoveten z: CEN ISO/TS 15530-3:2007
ICS:
17.040.30 Merila Measuring instruments
SIST-TS CEN ISO/TS 15530-3:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 15530-3:2008

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 15530-3:2008
TECHNICAL SPECIFICATION
CEN ISO/TS 15530-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2007
ICS 17.040.30

English Version
Geometrical product specifications (GPS) - Coordinate
measuring machines (CMM): Technique for determining the
uncertainty of measurement - Part 3: Use of calibrated
workpieces or standards (ISO/TS 15530-3:2004)
Spécification géométrique des produits (GPS) - Machines à Geometrische Produktspezifikation (GPS) - Verfahren zur
mesurer tridimentionnelles (MMT): Technique pour la Ermittlung der Messunsicherheit von
détermination de l'incertitude de mesure - Partie 3: Koordinatenmessgeräten (KMG) - Teil 3: Anwendung von
Utilisation de pièces étalonnées ou des normes (ISO/TS kalibrierten Werkstücken oder Normalen (ISO/TS 15530-
15530-3:2004) 3:2004)
This Technical Specification (CEN/TS) was approved by CEN on 8 October 2007 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 15530-3:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 15530-3:2008
CEN ISO/TS 15530-3:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 15530-3:2008
CEN ISO/TS 15530-3:2007 (E)
Foreword
The text of ISO/TS 15530-3:2004 has been prepared by Technical Committee ISO/TC 213 “Dimensional and
geometrical product specifications and verification” of the International Organization for Standardization (ISO)
and has been taken over as CEN ISO/TS 15530-3:2007 by Technical Committee CEN/TC 290 “Dimensional
and geometrical product specification and verification” the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai
...